Panther Safe-Skeg od nehrđajućeg čelika Sierra International 35-SS625 Marine-Grade za vanbrodske motore Select Force, Honda, Mercury/Mariner, Nissan, Tohatsu i Yamaha

Brand:‎Sierra International

3.8/5

148.68

Sierra International 35-SS625 Panther Safe-Skeg od nehrđajućeg čelika Marine-Grade za Select Force, Honda, Mercury/Mariner, Nissan, Tohatsu i Yamaha motore Bilo da želite zaštititi svoj novi skeg, popraviti oštećeni ili samo želite dodati malo sjaja, konstrukcija od nehrđajućeg čelika 316 Marine-Grade Sierra's Panther Safe-Skeg briljantno je polirana, a instalacija traje samo nekoliko minuta! Sierra nudi kompletnu liniju Ultimate Skeg Protection and Repair. DODATNI DETALJI • Nudi zaštitu od nehrđajućeg čelika 316 Marine-Grade • Briljantno polirano s bešavnim dizajnom • Sadrži drenažni otvor za zaštitu od korozije i smrzavanja • Instalacija traje samo nekoliko minuta • Debljina materijala: 1,5 mm (50% deblji od konkurencije) • Zaštitna ploča nije potrebna zbog dodatne debljine Safe-Skeg materijala • Komplet uključuje: Safe-Skeg, hardver za montažu, upute, inbus ključ i Loctite 262 INFORMACIJE O PRIMJENI • Dizajnirano da odgovara: Force Outboard – 70-90 HP (Od Mercury), 2-taktni od 1998. do 2002. Honda izvanbrodski motor – 75-90-115 KS, 4-taktni od 1995. do 2007. Mercury/Mariner izvanbrodski motor – 50-60 KS (Big Foot), 2 i 4-taktni od 2003. do sadašnjeg izvanbrodskog motora Mercury/Mariner – 70-75-80 KS, 2 i 4 takta od 1984. do sadašnjeg vanbrodskog motora Mercury/Mariner – 70-90-100-115-125 KS Optimax, 2 i 4 takta od 1983. do sadašnjeg Nissana Izvanbrodski motor – 70-90-115-120-140 KS, 2-taktni od 1983. do danas Tohatsu izvanbrodski motor – 70-90-115-120-140 KS, 2-taktni od 1993. do danas Yamaha izvanbrodski motor – 60-70- 80-90-100 KS, 2 i 4 takta od godina 1998. do 2001. O SIERRI Sierra je posvećena zaštiti vas i vaše investicije. Već 50 godina Sierra, jedno od najpouzdanijih imena u pomorskoj industriji, s ponosom nudi visokokvalitetne dijelove motora i pogona. Njihovi proizvodi zadovoljavaju ili nadmašuju dio originalne opreme koju zamjenjuju i projektirani su da zadovolje današnje zahtjeve motora s velikom konjskom snagom, dok istovremeno podnose surovo morsko okruženje. SIERRA. /b> Svi dijelovi Sierre ispunjavaju uvjete za Sierru. Sierra jamči da njeni proizvodi nemaju nedostataka u izradi i materijalima tijekom vijeka trajanja proizvoda. Sierra će popraviti ili zamijeniti neispravan proizvod besplatno. uvjetima i ograničenjima. Možete pogledati Sierru.

Debljina materijala: 1,5 mm (50% deblji od konkurencije). Za: Odaberite vanbrodske motore Force, Mercury/Mariner, Nissan, Honda, Tohatsu i Yamaha. Pogledajte opis proizvoda u nastavku za sve informacije o primjeni. Sadrži drenažni otvor za zaštitu od korozije i smrzavanja. Briljantno ispolirano s besprijekornim dizajnom. Komplet uključuje: Safe-Skeg, hardver za montažu, upute, imbus ključ i Loctite 262.
Brand ‎Sierra International
Country of Origin ‎USA
Customer Reviews 4.7 4.7 out of 5 stars 1,132 ratings 4.7 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item model number ‎35-SS625
Item Weight ‎1.62 pounds
Manufacturer ‎MARINETECH PRODUCTS INC.
Manufacturer Part Number ‎35-SS625
Model ‎35-SS625
Product Dimensions ‎0.75 x 9 x 18 inches

3.8

13 Review
5 Star
82
4 Star
11
3 Star
4
2 Star
1
1 Star
2

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s*

Scritto da: PPL who love the South West
Awesome for repairing accident damagd!
Last year after a long weekend at the lake in haste to beat a storm. We jumped in the truck after securing my boat. I for got to raise the outboard. I didn't realize it until after 5 miles of driving. The Skeg was destroyer. I found this product t asked me thousands of dollars. In 20 minutes. Follow the instructions step by step to achieve desired results.
Scritto da: Christian
A++++++
A++++++
Scritto da: Brock Eggleston
Saved my lower unit due to cracked skeg
Skeg on Lower unit had cracked due to hitting a rock. Installed this and it not only looks great it works well. Was easy to locate and install onto the lower unit. Stainless steel fasteners look very nice
Scritto da: DRay
Awesome product
I installed it in the beginning of the season with ease. Probably half hour install. Much thicker and heavier than I imagined. It looks fantastic and add lots of character to my boat when on the trailer. It also helps steering as my other skeg broke off from previous owner. No welding was going to be considered for this aluminum area by me so this is really only option. And I’d recommend it for sure
Scritto da: Chuck
Easy to install, quick fix for a broken skeg.
I bought a SeaRay 180 BR with a 3.0 liter Mercruiser last fall from a dealer that had it on consignment. I saw that it had a big chunk broken out of the rear of the skeg so I almost passed on it. The sales guy (a friend of mine) said just install one of these and it will be good as new. It was super easy to install. Just file off any burrs or divots, tap it in place with a rubber hammer and drill the mounting holes. One little trick I have learned over the years is to use a center punch on the aluminum first to center the drill in the holes on the fitting and keep if from "walking". Then start drilling with a smaller drill bit than the final size. Drill about half way through with the small drill then go to the other side and drill the rest of the way through. The first pilot hole you drilled from the first side will help direct the drill back to the center. When you use the recommended drill size to drill the final hole it will hit the other side dead on.
Scritto da: Kindle Customer
looks great
Does exactly what it says
Scritto da: andrey
Easy installation, perfect fit
Easy installation, perfect fit
Scritto da: Kenneth Baca
A must if your operating your boat in low water level.
Easy install a must for boats that operate in shallow water.
Scritto da: Hootie57
Easy to install
Solid piece to help repair my Skeg after we had found some “hard water” during the last trip out. Fitment was a little off but made a few small modifications and seemed to work well. I’ve used a lot of panther products in the past and they’ve never disappointed
Scritto da: Bev
Fit on a Mercury Classic 60
So although not designed for my 87 Mercury Classic 50, (45 hp 2 stroke, 4 cyl 45 hp) I was able to grind my old front edge slightly and get a great fit. Based on my measurements and the manufacturers feedback, this is the one I chose. The 650 did not fit. This did. Great quality and value. Easy to install 30 minutes.
Scritto da: Marc Sarrazin
Super facile à installer
Parfait pour réparer la pièce briser
Scritto da: Edward W de Jong
Easy to install.
Great product.
Scritto da: Amanda
It was great to hide the damage we had done to our skeg.
Easy to install

Povezani proizvodi

hot
Stemco originalni hubometar - 650-0605
4/5

€ 141.82

Stemco originalni hubometar - 650-0605
4/5

€ 141.82

Otkrijte našu međunarodnu mrežu

Šaljemo u 28 zemalja, preko 200.000 proizvoda. Budite u toku, pretplatite se na newsletter.

Array