Zildjian Sizzle zakovice - 12 pak

Name: Zildjian Sizzle zakovice - 12 pak
Brand: Avedis Zildjian Company
SKU: 0642388321621
Price: 29.14 EUR
Availability: InStock

Brand:Avedis Zildjian Company

3.3/5

€
29.14

Nekada ih je Armand Zildjian nazvao čavlima, činele za zakivanje inspirirane su bubnjarima koji su stavili prave čavle u svoje autentične kineske činele kako bi im dali veću održivost. Želite li ponovno izmisliti svoj zvuk vožnje ili nadograditi tu FX činelu s malo više smeća? Zildjian Sizzle Rivets odlična su prva stanica. Zakovice se i danas dodaju činelama, tradicionalno u skupinama od tri ili u ravnomjerno raspoređenim krugovima oko činela. Mala skupina zakovica stvara topli, zadimljeni efekt cvrčanja jazza koji rasteže sustain tijekom sviranja ili dodajte još više zakovica kako biste vašoj čineli dali oštar zvuk griza koji brzo guši sustain za suvlji učinak. Čuješ to. Zildjian Sizzle Rivets mogu vam pomoći da to napravite.

Iznos

Dodaj u košaricu Kupi sada

EAN: 0642388321621

Kategorije Industrijski i znanstveni, Čavli, vijci i spojni elementi, Zakovice, Čvrste zakovice,

Pakiranje od 12 zakovica. Opskrbite se zakovicama za oštriji zagriz. Grupa s 3 zakovice za zadimljenu cvrkutavu vožnju. Stvorite izražajne efekte cvrčanja i trash zvukove. Ponovno osmislite svoju vožnju ili nadogradite svoj FX.

Color Name	Silver
Country of Origin	USA
Customer Reviews	4.2 4.2 out of 5 stars 108 ratings 4.2 out of 5 stars
Is Discontinued By Manufacturer	No
Item model number	ZIL ZRIVET
Item Weight	0.704 ounces
Product Dimensions	18 x 5 x 5 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s^*

Vaša ocjena

Scritto da: Amazon Customer

The real deal

The right material (steel), size, and type for the perfect sizzle. Drill the holes 5/32" to get the right amount of wobble. Slightly widen the bottom ends using a punch or other drift with wide angle, and a hammer. (Withe the cymbal upside-down and the rivet head resting on a heavy piece of metal. ) Split type rivets are easy to install but to me they neither look nor sound right. Now your sizzler is indistinguishable from a factory made sizzle cymbal.

Scritto da: D. R. Hernandez

Not the good old days!

Having used Zildjian cymbals my entire career & having owned a Zildjian with factory rivets, these don’t clome close to the sound they should generate. No sizzle here! DRH.

Scritto da: Brian legner

Perfect

Easy to install with a hammer

Scritto da: Giuliano

A little pricey, they work!

I added this to a very cheap Wuhan China cymbal by punching some holes in it and it really changed the sound for the better. My band-mates were all very impressed.

Scritto da: Amazon Customer

They work

I bought these to take out my old 1965 Zildjian sizzle cymbal and clean, polish and put in new rivits.

Scritto da: J　o

Worked great

Wanted to get a different sound from one of my cymbals and these rivets were the perfect thing. Very easy to install.

Scritto da: Roger

Sizzle Rivets Too Small for traditional cymbal holes

These sizzle rivets are NOT GOOD. They are too narrow for traditional cymbal holes. Even MORE IMPORTANT, these are extremely difficult (if at all) to "spread" the back of so as to keep them in place. The "spreading" part on back of rivet needs to be twice as deep: core of rivet prevents anything to penetrate deep enough to spread properly. Even the slight spread, if/when accomplished, is not wide enough to hold sizzle rivet in place.

Scritto da: T. Weaver

amazing vintage sound returned to the cymbal

great to put the sizzle back, a bit pricy.

Scritto da: Mike

Perfect for the job

I wanted to add some sizzle to an existing surplus Paiste crash cymbal, so I first tried out the effect with a thin metal chain hung outwards from its centre. I then let the cymbal balance on its stand, by spinning it round several times to see where it rested, and marked three equidistant holes about one and a half inches from the edge (ensuring a gap for the place where the cymbal is usually struck, masked the spot with tape, and drilled, then gently smoothed the edges, . With the rivets in place, I was well pleased with the result. Generally speaking, the closer to the edge, the more effective the sizzle, and the heavier the cymbal, the more sustain you're likely to get. Remember it's important that the cymbal's balance should remain undisturbed, and a cheap cymbal will not become magically improved by a few rivets. I could have installed up to three extra rivets between the existing ones, but didn't need to - some drummers prefer to place three rivets close together on the far side of the cymbal in its balanced position, but I found the spaced out position perfectly OK. Zildjian rivets are ideal, right size, right weight. I found a small pair of crimping pliers to bend out the edges of the rivets, which otherwise is tricky. They're obviously very expensive for what they actually are, but I tried several types of paper rivets, etc., with no success. It's a worthwhile investment.

Scritto da: David

Too small. Doesn’t fit standard rivet size

Took a lot of hammering to get them to flare out to size. Maybe just visit your local hardware store instead.

Scritto da: Jimmy Mack

Nice looking bright rivets

- however I'm disappointed as they're not split on the shaft. I'm not sure if I'll be able to use them as intended.