Vodoravna ploča Steelbody i organizator za olimpijske šipke s čeličnim okvirom i transportnim kotačima STB-0130, smeđa

Name: Vodoravna ploča Steelbody i organizator za olimpijske šipke s čeličnim okvirom i transportnim kotačima STB-0130, smeđa
Brand: Steelbody
SKU: 096362993128
Price: 233.41 EUR
Availability: InStock

Brand:Steelbody

3.7/5

€
233.41

Veće nije uvijek bolje, pogotovo kada je riječ o upravljanju prostorom u vašoj teretani. Ako imate problema s držanjem svih svojih dragocjenih ploča za podizanje na mjestu, onda je vrijeme da nabavite Steelbody horizontalni stalak za ploče! Pumpanje željeza je različito za svakoga i prilagođavanje utega ključno je za izvlačenje maksimuma iz svakog treninga. Međutim, može biti izazov mijenjati pločice za svaki različiti režim treninga. Steelbody Plate Rack drži sve vaše težine pri ruci svojim čvrstim čeličnim okvirom s ugrađenim kotačima i ručkom za laki transport. Završna obrada obložena prahom čini ovaj stalak otpornim na znoj i vodu što pomaže u sprječavanju nakupljanja hrđe za dugotrajnu upotrebu. Dizajn komercijalnog stila dolazi u niskom profilu za lak pristup pločama s utezima. S maksimalnim kapacitetom težine od 300 funti, horizontalni stalak za tanjure može držati tanjure i šipke olimpijske veličine sa svakim razdjelnikom udaljenim 6 inča. Bilo da se radi o vašoj kućnoj teretani ili profesionalnoj upotrebi, Steelbody horizontalni stalak za tanjure olakšava organiziranje vaših utega, omogućujući vam da se usredotočite na dizanje teških tereta! Sa svojim izdržljivim čeličnim okvirom, ovo drvce nudi vam veliku vrijednost za vaš novac.

Iznos

Dodaj u košaricu Kupi sada

EAN: 096362993128

Kategorije Sport i otvoreni prostori, Vježbanje i fitness, Oprema za trening snage, Stalci za utege, Stalci za pohranu tanjura,

Tvrtka sa sjedištem u SAD-u s timom korisničke službe koji vam može pomoći u vezi s bilo kakvim pitanjima. Uz jamstvo proizvođača Marcy, možete biti sigurni da dobivate najbolju uslugu u industriji. Bilo da se radi o zamjenskom dijelu ili pitanju o ugradnji, tu smo da vam pomognemo. VELIKA VRIJEDNOST – Upotpunite svoju teretanu ovim stalkom za utege. S ukupnim dimenzijama od 40,5 L x 11,5 Š x 10 V inča, pomaže organizirati sve vaše podizne ploče s dizajnom niskog profila koji je čvrst i izdržljiv. PRIJENOSNI ORGANIZATOR ZA UTEGE – Ovaj stalak može držati do 300 lbs. utega. SVESTRAN – Ovaj stalak može primiti tanjure olimpijske veličine i dvije olimpijske šipke za dizanje, dajući vam slobodu da brzo mijenjate tanjure. Dizajn niskog profila olakšava korištenje za produktivne treninge. JEDNOSTAVAN TRANSPORT – Kotači ugrađeni u ovaj stalak omogućuju nesmetan transport po vašem domu ili teretani, eliminirajući potrebu za zamornim podizanjem.

Brand	Steelbody
Brand	‎Steelbody
Brand Name	‎Steelbody
Color	‎brown
Customer Reviews	4.7 4.7 out of 5 stars 1,552 ratings 4.7 out of 5 stars
Frame Type	‎Steel
Included Components	‎Warranty card, one weight plate storage with bar rack, User manual
Item Dimensions LxWxH	40.5 x 11.5 x 10 inches
Item Dimensions LxWxH	‎40.5 x 11.5 x 10 inches
Item Package Dimensions L x W x H	‎36.2 x 12.4 x 10.9 inches
Item Weight	23 Pounds
Item Weight	‎23 Pounds
Manufacturer	‎IMPEX
Material	Alloy Steel
Material	‎Alloy Steel
Model Name	‎STB-0130
Model Year	‎2007
Number of Racks	‎4
Package Weight	‎11.84 Kilograms
Part Number	‎STB-0130
Product Dimensions	‎40.5"D x 11.5"W x 10"H
Size	‎41”L x 11”W x 9.5”H
Sport Type	‎Exercise & Fitness
Style	Bumper Plate Rack
Style	‎Bumper Plate Rack
Suggested Users	‎Unisex-Adult
Warranty Description	‎2 year manufacturer warranty
Weight Limit	‎300 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s^*

Vaša ocjena

Scritto da: Jonathan G. Wares

Only works for very large weights - though modifiable for smaller (older; ex., Weider brand) weights

Accommodation of smaller sized (ex., traditional Weider brand metal weights) is done by adding two (2) struts, each having one (1) thru-hole (see photo). Although the handle bar holes are utilized (forgoing use of the handle), no alteration of the original plate rack needed. With disassembly of the struts, rack assembly with handle is still an option available when rolling transport movement is necessary.

Scritto da: MJ

Great

Great weight rack for good value!

Scritto da: Kelsie Bailey

Completely satisfied

Useful & easy to move. I have a home gym with multiple bars, plates, and bummer plates. It is identical to numerous racks in professional gyms.

Scritto da: Teresa

Commercial gym level product

This is the perfect plate rack for the floor. It’s sturdy and made of high quality metal. I might get another one. For me this was a good solution since I didn’t want it to take up much space.

Scritto da: Big Red

Bullet proof, just not a tower

While I must say I would love love love a tower, I prefer this. I mean what’s not to love, it’s easy to move around, gets the job done and organizable. Plus did I mention bomb proof?

Scritto da: JD

Meets expectations.

On time delivery, easy to assemble (it's just the handle to add). Wheel mobility isn't as good as some higher-end products with the in-line skate type wheels but not expecting to have to move it around too much. Bought for a simple storage solution for set of bumper plates, perfect capacity for our home gym use. Not over the top, but neither was the price.

Scritto da: Mike Blay

Missing nut to balance stand..

This unit came with 1 rubber base screwed on and the other was off and the nut was no where in the box. Pretty frustrating because the unit is now unstable..

Scritto da: Michael Winczuk

Very sturdy

I use this for my bumper plates and curl bars. I love that it has wheels and is strong. My home gym is a bit cramped so ot helps to be able to move this around. I love it

Scritto da: Alex

Highly Recommended. Works perfectly with my equipment.

Unlike some other reviews (here and many on US site), my 2x45lbs bumpers fit perfectly in the last slot furthest from the handle, not tight at all, with wiggle room to easily add and remove the plates. So fitting my smaller plates is a non-issue. In total, it easily holds my set of 2x45, 2x35, 2x25, 4X10, with no mixing of sizes to get them to fit. I have bumpers by Northern Lights so the fit may vary depending on your plate models. The 2 bar holders are a nice bonus, holding both my straight and EZ curl bar. It's solidly built as well and the handle assembles easily. For the price and function I think this is an excellent value and perfectly fits my needs. Also you don't realize the energy wasted moving, bending, and lifting plates all over the floor to access what you need. Lovely to get that stuff off the floor. It makes changing plates a breeze so you can focus on your workout and actually use your rest time between sets to rest.

Scritto da: Charity

Great and affordably plate storage

I've had this for two lockdowns now. (Going into our third.) Very easy to put together. It fits all my plates and could fit more. My 45s (comp plates) fit in one partition, 35s in another, and 25s in another. Both my 10s and 15s (bumper plates) fit in the last slot. There would likely be enough room for 10s in with the 25s as well. Perfect fit for what I have. People talk about the handle moving when you lift it. Not sure what the point would be to lift it while it's loaded.

Scritto da: AliSays

Great plate rack!!

Using this rack for my home gym equipment, I have all cast iron plates (plus one set of bumpers) so I am a little more careful about loading them onto this steel rack (avoiding chipping as much as possible). I do wish this rack had a rubber or vinyl coating so it would protect the cast iron plates more, but overall love how organized this makes my space. I can keep my barbells off the floor and out of the squat rack and all the plates are in one spot, making life easy when I need to load it all onto the bar. Definitely recommend for home gym equipment!

Scritto da: Melo

Solid weight rack - heavy duty

Impressed by this weight rack, it is heavy-duty and holds a lot. I have 355 pounds loaded onto it (bars included) and it feels solid. One slot can hold three 25# plates. Assembly was easy (just had to attach the handle), and the bar holders hold both 35 and 45. Highly recommend.

Scritto da: RCL

Works as intended

What can I say, others have said that their weights do not fit (2 side by side) I have steel plates and the 45 and 50lbs fit with room to spare (side by side) Not sure how thick your plates are that don't fit but I had absolutely no issue. Bar holder a nice bonus