UltraPro Z-Wave pametni prekidač za rasvjetu s QuickFit i SimpleWire, 3-smjerni, kompatibilan s Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, Bijelo, 2 paketa, 54912 2 paketa Prekidač za svjetlo Bijeli prekidač

Name: UltraPro Z-Wave pametni prekidač za rasvjetu s QuickFit i SimpleWire, 3-smjerni, kompatibilan s Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, Bijelo, 2 paketa, 54912 2 paketa Prekidač za svjetlo Bijeli prekidač
Brand: UltraPro
SKU: 0030878549127
Price: 102.77 EUR
Availability: InStock

Brand:UltraPro

3.5/5

€
102.77

Ostanite povezani sa svojim domom uz UltraPro In-Wall Smart Switch. Kompatibilan sa svim Z‑Wave certificiranim pristupnicima, pametni prekidač daje vam bežičnu kontrolu vaših ožičenih svjetala s bilo kojeg mobilnog uređaja, računala ili daljinskog upravljača koji podržava Z-Wave. Instalacija je jednostavna - jednostavno zamijenite standardni zidni prekidač pametnim prekidačem. Bilo da ste kod kuće ili odsutni, pristupite prekidaču za paljenje i gašenje svjetla. Pametni prekidač ne samo da pomaže u smanjenju troškova energije, već i povećava sigurnost vašeg doma održavajući sobe svijetlim i udobnim za život. Vaš pametni dom upravo je postao pametniji uz UltraPro In-Wall Smart Switch.

Iznos

Dodaj u košaricu Kupi sada

EAN: 0030878549127

Kategorije Alati i poboljšanje doma, Električni, Utičnice, Prekidači za utičnice,

KOMPATIBILNOST - Radi sa svim LED, CFL, halogenim žaruljama, žaruljama sa žarnom niti i drugim uređajima. UZIDNA INSTALACIJA S ČVRSTIM ŽIČANIM VEZAMA (POTREBNA JE NEUTRALNA ŽICA) – Zamijenite postojeći zidni prekidač za samo 15 minuta – Zidna ploča NIJE uključena. Potrebna je neutralna žica – prije kupnje potvrdite da je ožičenje u vašem domu kompatibilno (stariji domovi možda nemaju neutralne žice). ALEXA KOMPATIBILNO (POTREBNO ČVORIŠTE) - Zahtijeva čvorište koje podržava Alexa za glasovnu kontrolu s proizvodima Amazon Echo (Alexa uređaj i čvorište prodaju se zasebno). Ne može se izravno povezati s ECHO PLUS (Samo ZigBee proizvodi mogu se izravno povezati na Echo Plus). ZAHTJEVA Z-WAVE CERTIFICIRAN HUB - Kompatibilan sa sljedećim Z-Wave Hubovima: Honeywell, Ring, SmartThings, Wink, HomeSeer, Fibaro, Trane, Nexia, ADT, Vera i više. BEŽIČNO UPRAVLJAJTE I PLANIRAJTE SVJETLA I DRUGE UREĐAJE – Zakažite vremenski ograničene događaje za povezane uređaje. Prilagodite scene za dan ili noć, kod kuće ili na putu. Bežično upravljajte prekidačem s bilo kojeg mjesta putem pametnog telefona, tableta, računala ili Z-Wave daljinskog upravljača. Prekidačem se može upravljati ručno.

Brand	UltraPro
Connector Type	Clamp
Contact Type	Normally Open
Country of Origin	China
Current Rating	15 Amps
Item Dimensions LxWxH	1.92 x 2.14 x 4.15 inches
Item model number	54912
Manufacturer	Jasco Products Company, LLC
Material	Polycarbonate
Operating Voltage	120 Volts
Operating Voltage	120 Volts (AC)
Operation Mode	ON-OFF
Product Dimensions	1.92 x 2.14 x 4.15 inches; 8.78 Ounces
Switch Type	Toggle
Terminal	Screw

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s^*

Vaša ocjena

Scritto da: R. Levy

Very easy to integrate with SmartThings!

Open the SmartThings app and scan the sticker on the switch before you install. SmartThings will recognize the switch (although it called it a GE switch). Then once it powers up there is nothing more to do. SmartThings sees the switch and then you can integrate with whatever Home app you use with your SmartThings devices. I didn't have to do any toggles etc. as is sometimes necessary with these devices in order to find the device on the Z-wave network. For those that are interested, I installed this one in a housing box as pictured. The only problem was that the metal backplate on the switch was too large for this type of install, so I hacksawed it to align with the housing. Otherwise a straightforward install to replace an old Intermatic mechanical switch that is pretty outdated given the routines you can set up in SmartThings. I've installed a number of Zwave switches and although I can't speak yet to the reliability of this switch I did find that the initial set up was easier than some other devices.

Scritto da: Zeph

Same Hardware as GE, better price

These are the same Jasco Z-Wave switches that GE uses in their kit, just at a much better price. They integrated with HomeAssistant with no problems.

Scritto da: Diyengineer

Works so far

Purschased this to replace bad ge smart switches. Hoping these will last longer then ge brand. Also price is much better. Installation was easy and no hassle adding to smart things app.

Scritto da: Joe

Good ol Zwave.

Was looking for a replacement for an older GE jasco zwave switch that got toasted in a power outage. This one fit the bill. Was an exact match to the old one. And learning it was easy. Will buy again if I decide to Add more smart switches.

Scritto da: Jay_ATX

Works as good as GE and is compatible with Ring Alarm!

I needed to add some additional Zwave switches to my home but wanted something cheaper than the GE switches I had. These switches work the same as GE and are made by Jasco who also makes the GE Enbrighten switches. These also have a smaller profile than my original GE Zwave switches and paired easily to my Ring alarm. Installation was straightforward and took

Scritto da: toolseller

How to pair with SmartThings

For the SW4009 version, do the steps below to save hours: 1) Wire it up and install but leave faceplate off 2) do a factory reset even though it's new, flip toggle up 3 times, then down 3 times 3) in SmartThings app, find ur hub, select menu->Z wave utilities->z wave exclusion->flip toggle up and maybe down to get device excluded message. Maybe repeat...getting it excluded is KEY! 4) From a "room" in the app, select add a device. Browse by type->switch/dimmer->GE->GE z wave->next... 5) momentarily flip toggle up, then maybe down, and maybe repeat... usually works first time. You're not holding the toggle for this or any steps in this guide. 6) enter PIN from switch when prompted for the security function (u left cover off didn't u???).. don't bother trying to scan... 7) Success!!! Or try again from factory reset. You can now rename, move to another room, etc. 8) LED backlight is controlled in the Smart Things app. Select the switch and you can open the menu for the switch to control LED backlight function. I couldn't get it to work via directions provided with the switch by toggling the toggle. Finally, I've gotten a couple different versions of the "same item". This is what I FINALLY got to work with the noted part number. Factory reset and excluding from hub before adding to a room appear to be the key. Usually u don't have to keep toggling to get to pair but sometimes it helps, as does moving your hub close to the switch. If u can get the device excluded, ur well on ur way to success.

Scritto da: LearningMonkey

Same as GE for a lot less!

I saw these and thought this might be a cheaper option than the GE Embrighten switches that I have been getting. Not only are they cheaper, but they are EXACTLY THE SAME! I am pretty sure these are the exact same switches made by Jasco that GE offers. Features in the postings match up, they install in Smartthings as GE switches, and the printing/graphics on the face of the switch are the same! At $10 less per switch I will be getting these exclusively now. Thanks Ultra-Pro!

Scritto da: Myles

Switch was easy to install No customer service to help with software light switch integration!!!

Switch was easy to install No customer service to help with software light switch integration!!! On this I do not recommend this product!