0
0

Ukupno:€ 0.00

Vidi kolicaProvjeri
LoginRegister
0

Ukupno:€ 0.00

Vidi kolicaProvjeri
LoginRegister

TotalBoat aluminijsko brtvilo za curenje brodova

Brand:TotalBoat

3.3/5

€
76.26

Aluminijski čamci žive teško. Nasukaju se na obalu, udaraju u stvari uronjene u vodu i obično se koriste godinama. S vremenom na zakovicama i šavovima nastaju curenja, pukotine ili čak rupe. Aluminijski čamac koji curi može brzo potonuti. Većina postojećih proizvoda za popravak je zamorna i dugotrajna. Njihove upute zahtijevaju da premažete donju stranu čamca. Ne podnose dobro savijanje ili naprezanje, što dovodi do pukotina i neuspjeha popravka. TotalBoat aluminijsko sredstvo za brtvljenje curenja je drugačije. To je brz i jednostavan način za popravak curenja zakovica, pukotina, šavova i rupa u vašem aluminijskom čamcu. Dolazi u praktičnom ulošku koji stane u standardni pištolj za brtvljenje. Samo ubacite uložak u pištolj, pričvrstite priloženi vrh za miješanje na uložak, usmjerite, povucite ručku i odbacite prvih 3-4 inča zrnca. Nakon toga, Leak Sealer izlazi pomiješan u točnom omjeru 1:1 tako da dobijete odgovarajuće stvrdnjavanje i vodootporno brtvljenje. Tako je jednostavno dobiti pravu mješavinu—i pouzdan lijek—svaki put Ako živite u hladnijoj klimi, cijenit ćete činjenicu da ne morate čekati da vrijeme zatopli—možete primijeniti Aluminium Boat Leak Brtvilo kada je aluminijska površina i temperatura okolnog zraka niska kao 40°F, pod uvjetom da je aluminijska površina pravilno pripremljena. Aluminijsko brtvilo za curenje plovila otporno je na ulegnuće pa ostaje tamo gdje ste ga stavili i neće kapati iz šavova i rupa. Vrijeme geliranja je 40 minuta pri 72°F. Čvrstoća na savijanje je 8,800 psi. Čvrstoća na pritisak je 7200 psi. Obojite stvrdnute popravke za maksimalnu zaštitu. Pričekajte 7-10 sati prije brušenja i bojanja. Pričekajte 24 sata prije izlaganja stvrdnutog epoksida velikim opterećenjima. Usporedite s West System G/Flex 650-K kitom za popravak aluminijskih plovila. Uz TotalBoat nema mjerenja, miješanja, nereda i gotovo nikakvog čišćenja. Sve TotalBoat proizvode razvili su nautičari za nautičare, kako bi pružili veliku vrijednost i odlične rezultate. Znamo što funkcionira, a što ne.

Iznos
Dodaj u košaricuKupi sada

EAN: 0811932022776

Kategorije Sport i otvoreni prostori, Industrijski i znanstveni, Sport i fitness, Vožnja čamcem i jedrenje, Čamci i oprema, Zalihe za održavanje, Pribor za slikanje,

Dostupan u praktičnoj količini od 250 ml. uložak koji jednostavno odgovara standardnim pištoljima za brtvljenje. Uključuje 2 statična vrha za miješanje. Smola i učvršćivač dolaze u jednom ulošku i automatski se doziraju u odgovarajućem omjeru. Bez miješanja. Nema nereda za čišćenje. Može se nanositi na pravilno pripremljene aluminijske površine kada je temperatura zraka i podloge niska od 40°F. Dugo radno vrijeme (75 minuta pri 72°F) osigurava bolje prodiranje i bolje brtvljenje. Apsorbira naprezanja od skupljanja, vibracija, udara i širenja čvrsto držeći kako bi se spriječilo curenje. Jednostavan za korištenje, dvodijelni, fleksibilni, vodootporni epoksidni brtvilo popravlja curenje zakovica i šavova te krpa male rupe na aluminijskim brodovima brzo i učinkovito.
Brand TotalBoat
Color Buff
Compatible Material Aluminum
Is Discontinued By Manufacturer No
Item model number 497724
Manufacturer TotalBoat
Material Resin
Package Dimensions 9.92 x 2.87 x 1.93 inches; 13.76 Ounces
Style Compact

3.3

8 Review
5 Star
68
4 Star
13
3 Star
7
2 Star
2
1 Star
9

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s*

Scritto da: Kindle Customer
Easier to apply than other ratings implied
I bought this product to seal loose rivet leaks in my aluminum boat. I have not put the boat on the water yet, so cannot comment on how well it worked. That's why I gave it four stars and not five. I gave it four because the product was delivered promptly including a card asking for comments and offering a 20% coupon for future purchase as well as a product support phone number. Very nice service offer that at least appears as if the company - TotalBoat - is concerned about customer satisfaction. The product came well packaged and included two dispenser tips and a container that fits any caulk gun. Other comment had me a bit worried about being able to dispense the epoxy because I don't have great hand strength, however, cautioned by instructions on the tube I laid it in front of a heat duct while I prepared the surface and then had no trouble dispensing it at all. It was easy to get out of the tube, emerged as a not overly thick and easily pliable liquid that was very easy to manipulate, and ultimately made a nice layer that looks like a good seal. I applied it to rivets in the boat's floor then again on the bottom (so overhead). It stuck and stayed well in both locations. I've used Gluvit before and been very happy with it's property of filling in along the shaft of rivets as well as over the ends. This product is a little thicker, but it also had some flow so I'm hoping, but can't say for sure, that it did the same. In a week or two after I've finished this repair and installed the new floor, I will put the boat and the water. If it works as I hope, I'll change the rating to five stars. If not - well, you may see a new message in this space, but from all appearances I expect it to perform well.
Scritto da: Amazon Customer
Not mixing
I’m sealing the rivets on an aluminum Jon boat, the package states first 3-4 inches will be waste until mixed. I wasted first 5” just to be sure. For the next 40 rivets it seemed to work fine, then half way through it changed colors and I was only getting the orange/brown color assuming this is just hardener. So half my boat rivets got the epoxy side and the other half got just the hardener. Not happy with how it turned out because the first half I had to wipe off because there was no hardener. In the future I would buy a pre mixed boat epoxy from Home Depot.
Scritto da: Amazon Customer
Great product
I used this to seal some leaky rivets on a jon boat I recently acquired. Using a cheap caulk gun and the provided tips, it worked very well. It can be a little temperature sensitive so make sure you apply in conditions above 60 degrees. I did some application at that temperature and really killed my hand trying to squeeze the caulk gun trigger. I finished the job a few days later in warmer weather and found the application to be so much easier. The only thing to be aware of is that the tube can be a little misleading in size. It's only about 1/2 full, but I was able to seal every rivet on the bottom of my 14 boat, half the rivets on the inside, and several of the seams. It is however a caramel colored product and won't dry clear, so it will stand out that you've used it. That being said, it was perfect for my needs.
Scritto da: Real Customer
It seems to work
It takes more than 3 inches of material before it is properly mixed. Wait for the color to change to brown before applying it. It was white after 4 inches so I used it as it changed color. That section did not harden.
Scritto da: Jonathan Cowal
So far this has been a great product. I used it to seal every rivet ...
So far this has been a great product. I used it to seal every rivet and seam on an aluminum boat I was fixing. Some people have complained that it was difficult to dispense but I purchased the cheapest caulk gun I could find and it wasn't too bad. It was very easy to work with, I used a putty knife and was able to shape it easily around the areas I was working on. Also, it really does stay exactly where you apply it even when working on slanted or even upside down surfaces. Once sanded, I was able to paint over it and you cannot tell that there is anything there. I give it 4 stars because I have yet to test the boat out and I do not know how it holds up over time.
Scritto da: Kevin Vail
Very easy to use
I bought this to pro-actively seal the non-welded ribs on the hull of my 14ft v-hull. The mixing tip worked great. Each stick comes with two mixing tips in case you don’t use all of the compound in one instance. The compound is very easy to work with and apply and dries pretty quick for sanding and painting. So far I would highly recommend any product from this company.
Scritto da: MattG
Sealed up leaky aluminum boat
Worked well. I used it to seal a leaky riveted seam where the bottom of my aluminum boat meets the transom. Followed the instructions regarding surface prep, no problem squeezing it out with a standard cheapie caulking gun. Came out thin enough for me to force it into and through the seam with some compressed air, then gave it a thicker bead inside and out, then had plenty of time to smooth it. Took paint well. The following week, took it out to the lake, it sat in the water for 6 days with an hour or so of driving around each day, and no leaks at all. Very satisfied.
Scritto da: Barbara Bing
Takes some experience to apply
Did a good Job on leaks to an aluminum boat. Stuff is quite viscous and ease of application depends on size of opening. Used calking gun. Two nozzles to try with - you get better with time.

Povezani proizvodi

hot
TotalBoat Elixir Emajl
3.6/5

€ 77.28

TotalBoat Elixir Emajl
3.6/5

€ 77.28

hot
TotalBoat Elixir Emajl
3.6/5

€ 77.28

TotalBoat Elixir Emajl
3.6/5

€ 77.28

hot
STAR BRITE One Step sredstvo za čišćenje i posvjetljivanje od tikovine - 32 OZ (094932) , bijelo sredstvo za čišćenje i posvjetljivanje od 32 unce
3.6/5

€ 65.92

STAR BRITE One Step sredstvo za čišćenje i posvjetljivanje od tikovine - 32 OZ (094932) , bijelo sredstvo za čišćenje i posvjetljivanje od 32 unce
3.6/5

€ 65.92

hot
KiwiGrip neklizajući premaz bijeli 4 litre
3.6/5

€ 106.82

KiwiGrip neklizajući premaz bijeli 4 litre
3.6/5

€ 106.82

hot
West System G/Flex Epoxy (2-4oz) JEDINICE
3.9/5

€ 67.42

West System G/Flex Epoxy (2-4oz) JEDINICE
3.9/5

€ 67.42

hot
KiwiGrip krema protiv klizanja 4L
3.6/5

€ 376.43

KiwiGrip krema protiv klizanja 4L
3.6/5

€ 376.43

hot
attwood 14142-7 Vodootporni komplet slova i brojeva od vinila od 148 dijelova, crno-bijeli
3.7/5

€ 32.55

attwood 14142-7 Vodootporni komplet slova i brojeva od vinila od 148 dijelova, crno-bijeli
3.7/5

€ 32.55

hot
attwood 14142-7 Vodootporni komplet slova i brojeva od vinila od 148 dijelova, crna završna obrada
3.7/5

€ 31.31

attwood 14142-7 Vodootporni komplet slova i brojeva od vinila od 148 dijelova, crna završna obrada
3.7/5

€ 31.31

Otkrijte našu međunarodnu mrežu

Šaljemo u 28 zemalja, preko 200.000 proizvoda. Budite u toku, pretplatite se na newsletter.

Array

Ukupno:€ 0.00

Vidi kolicaProvjeri

Kategorije

Sve kategorije
Jelovnik Kategorije Blizu Košarica

Menu