SP Bel-Art Frigimat Cub - aparat za suhi led; 5⅝ x 7⅝ x 6½ in. (F38874-0000) 1

Brand:SP Bel-Art

1.9/5

769.89

Jednostavan za postavljanje i korištenje, ovaj kompaktni uređaj štedi vrijeme i troškove isporuke suhog leda. Može se pričvrstiti na cilindar za tekući CO2 (nije uključen) opremljen cijevi za uranjanje za proizvodnju bloka suhog leda od 250 do 350 grama spremnog za upotrebu u samo nekoliko minuta. Svakih 50 lb. cilindar se sastoji od 10-16 blokova suhog leda. Proizvodnja suhog leda može se promatrati kroz prozirno polikarbonatno tijelo koje se pričvršćuje bez stezaljki, vijaka ili alata, osiguravajući jednostavno uklanjanje čvrstog bloka suhog leda i odvajanje od CO2 cilindra. Lagano tijelo nikada nije tako hladno kao suhi led, čak i kada je napunjeno, što omogućuje siguran transport jedinice i sadržaja uz nošenje odgovarajućih rukavica. Robusna poniklana pletenica povezuje ga s ventilom boce CO2 koji se koristi za regulaciju protoka plina. Radi pri vrlo niskom tlaku (prikazano na ugrađenom mjeraču) i uključuje višestruke zaštitne mjere za smanjenje tlaka. Uključuje poniklanu bakrenu spojnu cijev od 1,8 m (6 stopa) sa standardnom CGA 320 navojnom spojnicom za jednostavno pričvršćivanje na LCO2 cilindar. Istraživački, industrijski i zdravstveni djelatnici oslanjaju se na SP Scienceware za svoje potrebe rukovanja uzorcima. Laboratorijski pribor robne marke Bel-Art i H-B Instrument koji se prodaje diljem svijeta uključuje više od 5000 artikala od sigurnosnih boca za pranje do kuhinjskih napa, termometara, nosača, eksikatora, hidrometara, posuda za led, lopatica i žlica. Dostupne su i usluge prilagođene kalibracije, oblikovanje plastike, specijalni premazi i proizvodnja žice. Laboratorijsko stakleno posuđe robne marke Wilmad-LabGlass nadopunjuje Bel-Art i H-B Instrument s više od 7000 artikala uključujući NMR i EPR potrošni materijal i posebno stakleno posuđe, kao i izradu po narudžbi za pojedinačno stakleno posuđe, usluge popravka stakla i OEM staklene dijelove. SP Scienceware odjel je tvrtke SP Industries sa sjedištem u Warminsteru, PA, koja također uključuje SP Scientific laboratorij, opremu za upravljanje toplinom i farmaceutsku proizvodnju te SP Ableware pomagala za svakodnevni život.

Prije instalacije pročitajte priručnik s uputama (PDF) pod tehničkim specifikacijama. Uključuje poniklanu bakrenu spojnu cijev od 1,8 m (6 stopa) sa standardnom CGA 320 navojnom spojnicom za jednostavno pričvršćivanje na LCO2 cilindar. Lagano tijelo nikada nije hladno kao suhi led, čak ni kada je napunjeno; omogućuje siguran transport jedinice i sadržaja uz nošenje odgovarajućih rukavica. Čvrsti poniklani konektor povezuje ga s ventilom boce CO2 koji se koristi za regulaciju protoka plina. Pričvrstite na cilindar za tekući CO2 opremljen cijevi za uranjanje kako biste proizveli blok suhog leda od 250 do 350 grama spreman za upotrebu u samo nekoliko minuta; svaki 50 lb. cilindar se sastoji od 10-16 blokova suhog leda. Prije instalacije pročitajte priručnik s uputama (PDF) pod tehničkim specifikacijama. Uključuje poniklanu bakrenu spojnu cijev od 1,8 m (6 stopa) sa standardnom CGA 320 navojnom spojnicom za jednostavno pričvršćivanje na LCO2 cilindar. Lagano tijelo nikada nije hladno kao suhi led, čak ni kada je napunjeno; omogućuje siguran transport jedinice i sadržaja uz nošenje odgovarajućih rukavica. Čvrsti poniklani konektor povezuje ga s ventilom boce CO2 koji se koristi za regulaciju protoka plina. Proizvodnja suhog leda može se promatrati kroz prozirno polikarbonatno tijelo koje se pričvršćuje bez stezaljki, vijaka ili alata, osiguravajući jednostavno uklanjanje čvrstog bloka suhog leda i odvajanje od CO2 cilindra. Pričvrstite na cilindar za tekući CO2 opremljen cijevi za uranjanje kako biste proizveli blok suhog leda od 250 do 350 grama spreman za upotrebu u samo nekoliko minuta; svaki 50 lb. cilindar se sastoji od 10-16 blokova suhog leda.
Country of Origin USA
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Item model number 388740000
Manufacturer Bel-Art Products
Product Dimensions 12 x 10.3 x 5.5 inches; 1.1 Pounds

1.9

8 Review
5 Star
29
4 Star
14
3 Star
11
2 Star
0
1 Star
46

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s*

Scritto da: Amazon Customer
Honor satisfied
Update May 2013: We have had no further problems with the dry ice maker or the pressure monitor. Update December 2012: I wanted to create an addendum to my previous comments. After posting this review, I was contacted by a Bel-Art representative who addressed all my concerns and replaced the machine within a week. I appreciate the time and effort that this thoughtful rep. took to satisfy a customer. November 2012: This was ordered to be used in programs with children. The dry ice maker worked fairly well the 5 times it was used over a 2 week period. After that, the gauge suddenly stopped working. I called Bel-Art customer service and was first told that this piece doesn't break. When I continued the conversation, I was promised a replacement part. It never arrived. When I called to find out why it hadn't arrived, I was told that the gauge failure was our fault, and we wouldn't get a replacement part. Now, I have a $340 piece of plastic. It was a nifty little gadget while it lasted, but it's certainly not worth the price or the hassle!
Scritto da: Amazon Customer
Works okay, but the "Dry Ice" is more like lightly compacted dry snow
First of all, this does make dry ice as advertised, and for the price it is an okay product. My complaint is that the description says that it makes a "solid block of dry ice" which is not really the case; it produces a very soft block of dry ice that is more like lightly compacted CO2 snow, which breaks into pieces and crumbles a lot when you try to remove it from the cylinder, which was disappointing to me. Having said that, I kept this rather than return it since it basically does the job. If this type of dry ice is acceptable for your application then this is a nice little device, but be aware the final dry ice product is different than what is stated in the description.
Scritto da: juan n.
consumes a lot of co2 for the little ice it makes
They indicate that it should be maintained at 1 psi for 5 to 6 minutes, it sends a pressure gauge that only has indicators of 5 in 5, it spent a 20-pound cylinder just to make a cylinder of dry ice, it is absurd, it leaks everywhere.
Scritto da: Charlie
ok for the price
I have used other dry ice makers in the past, and I think that this unit is ok for the price, but not great. The plastic seems fragile, especially at very cold temperatures. It takes about five minutes to fill, and seems to use more CO2 than the classic wooden boxes. The blocks typically come out in 2 pieces and are not as solid as I expected. But, all in all, it does the job we require of it... keeping small samples frozen during overnight shipping.
Scritto da: Mary S
Great fun for parties and other misc uses
We are having a Halloween party for my son and his teenage friends. They were thrilled with having special effects of "fog" for their party. The item is really easy to use and the instructions are great, even for a non-technical person. Since I have this handy little dry ice maker, I also use it to ship dry ice along with items I want to keep cool. I was shipping chocolate dipped cookies to a friend and decided to add some dry ice to keep it from melting in transit. The cookies got there in great shape and the dry ice was still intact.
Scritto da: ichiefmikey
The Frigimat Cub does a GREAT job for one-third the price!
I wanted this product for a Halloween party I am having, and for future "Fog Making" events. This model was definitely better priced than other units so I bought it, followed the instructions and ended up with awesome Fog Making Dry Ice each time! At less than 1/3 the price of other models, the Bel-Art Frigimat Cub will serve me well for all my Fog Making Parties. I recommend this unit to anyone who wants to make Dry Ice Fog and wants to save a LOT of money!
Scritto da: K. Martin
Junk
Just hooked up the 50lb CO2 tank as per the directions. Made sure everything was attached and aligned per the instructions. Turned on the gas slowly and took to 1 PSI ... 5 minutes, 6 minutes, no ice anywhere in the chamber - just on the metal tube. Tried again. Nada. Nothing. Zippo. $340 piece of junk ... and I've got a 50lb CO2 cylinder and 'cryo-gloves' that are worthless. Feelin' like a real chump. Sending back.
Scritto da: B.Graham (epieworks)
I like it but it was not complete parts were missing
I like it but it was not complete parts were missing. I called the Bel-Art products and the main part are on the way. I hope it works as stated. epieworks

Povezani proizvodi

Otkrijte našu međunarodnu mrežu

Šaljemo u 28 zemalja, preko 200.000 proizvoda. Budite u toku, pretplatite se na newsletter.

Array