RIDGID 32573 Model 118 2-u-1 Close Quarters AUTOFEED 1/4 do 1-1/8 kompaktni rezač metalnih cijevi, srebrna/crna

Name: RIDGID 32573 Model 118 2-u-1 Close Quarters AUTOFEED 1/4 do 1-1/8 kompaktni rezač metalnih cijevi, srebrna/crna
Brand: RIDGID
SKU: 956913257300
Price: 87.29 EUR
Availability: InStock

Brand:RIDGID

3.6/5

€
87.29

OPIS PROIZVODA Izgrađeni na povjerenju zanata, potrebni su vam alati dizajnirani za stručnjake i napravljeni da traju. Iskusite izdržljivost rezača metalnih cijevi RIDGID 118 2-u-1 Close Quarters AUTOFEED s kapacitetom 1/4-1-1/8 (kataloški broj 32573, model 118). Ovaj snažni rezač omogućuje brže i lakše rezanje bakrenih, mesinganih i aluminijskih cijevi s kapacitetom od 1/4 inča do 1-1/8 inča u skučenim prostorima koji ograničavaju rotaciju rukom. S inovativnim dizajnom dva u jednom, rezač cijevi može se koristiti sam ili s priloženom lako pričvršćivom čegrtaljkom za vrhunsku fleksibilnost i mobilnost. Ova ergonomska ručka je robusna, kompaktna i lagana i radi u koracima od samo 10 stupnjeva kako bi se omogućilo fino indeksiranje u uskim područjima. Projektiran za praktičan i učinkovit rad, gumb u obliku nogometne lopte lako se okreće i potrebno ga je zategnuti samo jednom, dok kotač za rezanje s oprugom automatski reže na teško dostupnim mjestima. Ovo je upotpunjeno dugotrajnim reznim kotačem izrađenim od visokokvalitetnog čelika i uključuje rezervni kotač koji se nalazi u gumbu. RIDGID je globalni proizvođač više od 300 pouzdanih i inovativnih alata, kojima vjeruju vješti obrtnici u više od 100 zemalja. RIDGID proizvodi su namjenski izgrađeni za profesionalce na komercijalnim, industrijskim i energetskim tržištima u razvoju koji postavljaju i održavaju svjetsku infrastrukturu. IZRAĐEN ZA ONE KOJI ZNAJU.® OD PROIZVOĐAČA. Ridgid 32573 118 Close Quarters Quick-Feed Cutter sada se može poboljšati s čegrtaljkom koja omogućuje lakše rezanje u tijesnim, ograničenim prostorima. Robusnog i kompaktnog dizajna, drška se može pričvrstiti na rezač i raditi u koracima od samo 10 stupnjeva. To omogućuje fino indeksiranje rezača za rad u skučenim prostorima. Nova ručka s čegrtaljkom omogućuje veću fleksibilnost i pokretljivost uz zadržavanje značajki AUTOFEED modela 118 Cutter, koji je dizajniran za rezanje tvrdog i mekog bakra, aluminija i mesinga. Rezač 2-u-1 za male prostore može se koristiti sam ili s ručkom sa čegrtaljkom, laganim i ergonomskim dodatkom koji pomaže u korištenju rezača u uskim i ograničenim prostorima. Ovaj rezač je jednostavan za korištenje na teško dostupnim mjestima jer je gumb potrebno samo jednom zategnuti. Ručka radi u skučenim prostorima koji su premali za rotiranje rezača rukom. 32573 je podesiv na bilo koju veličinu od 1/4-inča do 11/8-inča OD. Ovaj rezač cijevi dolazi s rezervnim E-3469 kotačićem za rezanje u gumbu. Od 1923. Ridgid je ostao simbol sigurnosti za predane profesionalce stručnih zanata. Ridgid pokriva svoje proizvode doživotnim jamstvom protiv nedostataka u materijalu ili izradi tijekom životnog vijeka alata.

Iznos

Dodaj u košaricu Kupi sada

EAN: 956913257300

Kategorije Alati i poboljšanje doma, Električni i ručni alati, Ručni alati, Rezači, Rezači cijevi,

JEDNOSTAVNO ZA RUKOVANJE: gumb u obliku nogometne lopte lako se okreće i potrebno ga je zategnuti samo jednom, dok kotač za rezanje s oprugom automatski reže radi lakšeg korištenja i rada na teško dostupnim mjestima. PRAKTIČNO I UČINKOVITO: Sadrži dugotrajni rezni kotač izrađen od visokokvalitetnog čelika s rezervnim kotačem koji se nalazi u gumbu. ERGONOMSKA RUČKA: Robusna, kompaktna i lagana i pričvršćuje se na rezač za rad u koracima zapetljanja od samo 10 stupnjeva, što omogućuje fino indeksiranje u uskim područjima. 2-U-1 DIZAJN: Omogućuje korištenje inovativnog rezača samostalno ili s priloženom lako pričvršćivom čegrtaljkom za vrhunsku fleksibilnost i mobilnost. KOMPAKTNI REZAČ ZA METALNE CIJEVI: Omogućuje brže i lakše rezanje bakrenih, mesinganih i aluminijskih cijevi s kapacitetom od 1/4 in. do 1-1/8 in. u uskim prostorima koji ograničavaju rotaciju rukom.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	RIDGID
Brand	‎RIDGID
Color	Silver/Black
Color	‎Silver/Black
Customer Reviews	4.6 4.6 out of 5 stars 2,318 ratings 4.6 out of 5 stars
Grip Type	Ergonomic
Grip Type	‎Ergonomic
Handle Material	Metal, Aluminum, Alloy Steel
Handle Material	‎Metal, Aluminum, Alloy Steel
Included Components	‎Cutters
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	13 x 6.75 x 2 inches
Item Dimensions LxWxH	‎13 x 6.75 x 2 inches
Item model number	‎118
Item Package Quantity	‎1
Item Weight	500 Grams
Item Weight	‎1.1 pounds
Item Weight	‎500 Grams
Manufacturer	‎Ridgid
Material	Aluminum
Material	‎Aluminum
Number Of Pieces	‎1
Part Number	‎32573
Power Source	‎Crank
Product Dimensions	‎13 x 6.75 x 2 inches
Usage	Professional
Usage	‎Professional
Warranty Description	‎RIDGID branded tools are known the world over as best-in-class tools that allow the end-user to complete jobs more quickly and reliably. However, there's added peace of mind with the RIDGID Full Lifetime Warranty. Should your tool ever malfunction from defects in workmanship or materials, we will repair or replace the tool free of charge. RIDGID tools are warranted to be free of material and workmanship defects. This warranty lasts for the lifetime of the RIDGID tool. Warranty coverage ends when the product becomes unusable for reasons other than defects in workmanship or material. To obtain the benefit of this warranty, deliver the complete product via prepaid transportation to Ridge Tool Company, Elyria, Ohio, or any authorized RIDGID Independent Service Center. Pipe wrenches and other hand tools should be returned to the place of purchase. Warranted products will be repaired or replaced, at Ridge Tool's option, and returned at no charge; or, if after three attempts to repair or rep

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s^*

Vaša ocjena

Scritto da: Commando8466

Excellent tool works great a little pricey

Excellent tool works great a little pricey

Scritto da: Christopher Vroma

Great Innovation

I wish they made these back when I worked full time in the business. Much easier to use and saves time. Highly recommend

Scritto da: Bill

Works great in stud spaces

I use this for electrical work. Does great with emt in tight spaces. Highly recommend for the price. Works amazing.

Scritto da: Ken

Buy one

Great tool, can't believe I didn't owe one.

Scritto da: Ethan Hollis

Way bigger than I expected. A normal tubing cutter is around the same size.

This is much larger than I expected and was not what I was looking for. However, the fact that you can separate the inner piece from the ratchet is awesome. I use the inner piece more than anything. THAT piece is compact.

Scritto da: xbrachiosaurusx

Rigid Close Quarters Quick-Feed Cutter with Ratchet Handle Review

Delivery – This product was delivered on time/early with no problems. The product was properly packaged and looked great right out of the box. Quality – The metal handle and imp cutter seem to both be well made from good quality metal. These parts seem heavy-duty and made to last. Unfortunately, as many other reviewers have mentioned, the plastic ratcheting mechanism seems like the product’s weak point. This part ought to be made of a stronger material. I suppose with RIDGID’s lifetime warranty, this shouldn’t be difficult to replace, if it does break. I’ve used my cutter for cutting ½” copper pipe for a shower valve install. The ratchet did not break and is still working well. I don’t think the plastic ratchet warrants a bad review. Functionality – I like the design of this product. If you’ve ever used an imp cutter for making many cuts, it can be slow and cause fatigue. The handle and ratchet allowed me to cut pipe faster and without getting tired. Also, the cutter still fits in those tiny spots in framed cavities with the handle and ratchet. The only problem I’ve had is the supposed “self-feeding” cutter wheel. This did NOT work as advertised. I found myself tightening the knob as I would while using any other imp. In fact, I’ve tried to figure out how this tool is supposed to self-feed and there really doesn’t seem to be any mechanism that would allow for that function. The “self-feeding” claim is either false advertising or it’s a mistake. This is why I cannot give this product a 5-star review. Some reviewers have complained that it doesn’t leave a clean cut, but I haven’t had any issue with the quality of the cut. Overall – I bought this product because I saw it on an episode of “Ask This Old House”. I’m glad I did. The downsides are that the “self-feeding” cutter wheel doesn’t seem to work as advertised and the plastic ratcheting mechanism should be made of metal. The positives are that this tool is easier and faster than using just an imp cutter, but still fits into tight spots. Overall I’d recommend this to the DIYer who frequently tackles plumbing projects, but probably not to a professional plumber who prefers standard plumbing tools.

Scritto da: Jaime Castro

Plumbing

The versatility of this tool use the ratchet on all copper pipes or remove for tight spaces

Scritto da: Ozzie Valle

Not good in tight places..

Great tool, but again not good in tight places.. Better off buying auto cutters.

Scritto da: Mr. R M

pipe cutter

very good if not still a little bulky but it has the rigid quality

Scritto da: Christoph

Fantastic bit of kit

Fantastic bit of kit. Cuts pipe very easily and without the cutting wheel wandering up and down the pipe - a problem with inferior pipe cutters. Really well made and worth every penny. CC - 05th August 2017

Scritto da: MightyTiger

Great tool. DOES NOT AUTOFEED!

Really handy, nice strong construction, light and reliable. However, it does not auto feed, you have to keep tightening the knob every few turns of the ratchet to continue the cut. It would be quicker to cut the pipe with a pipeslice. But to save space in a toolbag I would suggest to have this.

Scritto da: BillF

It is bigger than you think!

A very well made device but one which will require a reasonable amount of space around the pipe. Quite chunky with the ratchet unit attached, larger than I imagined. Still the detachable cutter is a good size and where suitable works well.

Scritto da: Colin

Great small cutters for getting in to tight spaces

Great small cutters for getting in to tight spaces. Although they are for copper pipe they do cut stainless steel pipe. Just take your time dont run the cutting wheel up to tight. Quality tool for tradesman