Red Devil 08090I RD PRO 100% RTV silikonsko brtvilo otporno na toplinu, vodootporno ljepilo otporno na vremenske uvjete za upotrebu pri visokim temperaturama, 10,1 oz. Tuba, crvena, 12 pakiranja 12 pakiranja 10,1 oz

Name: Red Devil 08090I RD PRO 100% RTV silikonsko brtvilo otporno na toplinu, vodootporno ljepilo otporno na vremenske uvjete za upotrebu pri visokim temperaturama, 10,1 oz. Tuba, crvena, 12 pakiranja 12 pakiranja 10,1 oz
Brand: Red Devil
Price: 432.24 EUR
Availability: InStock

Brand:Red Devil

3.5/5

€
432.24

ZA NAJBOLJE REZULTATE: Prije nanošenja brtvila, uklonite sve stare brtvila, krhotine ili druge ostatke koji bi mogli ometati prianjanje i pobrinite se da se RTV brtvilo koristi na čistim, suhim površinama za najbolje rezultate. 50-GODIŠNJE JAMSTVO NA TRAJNOST PROIZVODA: Oslonite se na 100% silikonsko brtvilo otporno na toplinu Red Devil za svoje projekte koji se bave ekstremnom vrućinom; brtvilo ostaje fleksibilno i otporno je na vibracije uz impresivnu adheziju i osigurava vodootpornu brtvu koja traje 50 godina. NEĆE PUKNUTI, SKUPLJATI SE ILI LJUSTITI: Sa svojim dizajnom koji se ne spušta, vodootpornom i vodootpornom formulom, RTV brtvilo će izdržati vremenske uvjete i neće pucati, ljuštiti se ili skupljati za pouzdano brtvljenje koje traje godinama. OTPORA NA EKSTREMNO IZLAGANJE VRUĆINI: RD Pro industrijsko brtvilo otporno na toplinu formulirano je sa željeznim oksidom kako bi se oduprlo ekstremnom izlaganju toplini i podnosi temperature od 600 stupnjeva Fahrenheita (povremeno) i 500 stupnjeva Fahrenheita (konstantno). CRVENA BOJA ZA JEDNOSTAVNU IDENTIFIKACIJU: Idealno za upotrebu u industrijskim primjenama, brtvilo otporno na toplinu dolazi u crvenoj boji i može se koristiti na remenima pećnica, industrijskim pećnicama, prozorima pećnica, pećnicama za sušenje, bojlerima, grijačima, spojevima cijevi s prirubnicom, pristupnim vratima, grijanju Elementi u aparatima, i Dimovodi na plinskim aparatima.

Iznos

Dodaj u košaricu Kupi sada

EAN:

Kategorije Industrijski i znanstveni, Ljepila, brtvila i maziva, Silikon,

Brand	Red Devil
Color	Red
Item Weight	10.1 Ounces
Material	Silicone
Style	10.1 oz

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s^*

Vaša ocjena

Scritto da: Aiden

Did it's job well

Needed it to temporarily seal an exhaust flange after replacing the front pipe. Mating surface on existing center pipe was corroded badly, and I couldn't get a seal. This did the trick while I waited for a new center pipe to arrive.

Scritto da: Oleg Simakoff

Perfect for tough jobs

Nothing else I tried from Lowe's or home Depot worked. This did the job! I need to glue the ceramic cooktop to the metal stove frame. I'd say my only issue is that the color is red. Other than that minor thing, I am very happy with the outcome

Scritto da: Mortimer

Good stuff

So far so good. I used this to re-attach a piece of stone veneer very near the face of my fireplace, was concerned that due to the heat other glues wouldn't stand up. During this time of year, we have the fireplace going pretty much 100% of the time. I have a thermometer on the blower grate and it often reaches close to 400 degrees; the brick I needed to attach was only a few inches away from the grate. I let the fire die down, squirted a couple blobs on the back of the brick and stuck it on. It's tacky enough the brick held itself in place while drying. Been over a week now and it's still attached firmly and we've had the fireplace going 24/7. It works! **Update 4 months later** Still holding strong! We have had the fireplace cooking non-stop since I put this stuff on. No signs of loosening up at all. **Update 3 years later** Bricks adhered with this stuff are still stuck on, it's awesome. I just came here to order another tube for a different brick that fell and thought I would update this review.

Scritto da: Amazon Adam

High performance seal for furnace inducer fan!

Purchased this to fix and create a new seal for a furnace inducer fan assembly. The fan assembly is the heart of the furnace in order to get it up and running. I replaced the inducer fan as the bearings were done. I used this product to create a tight seal to prevent the carbon monoxide and other fumes from entering the basement. In addition to a gasket, I used this to seal the base of the inducer fan assembly to prevent it from leaking anything. The product is the best and withstands 500 degrees temperature. A must for anyone working with a furnace or hot surface that requires additional seal protection.

Scritto da: Lulu1953

Strong easy to use

The glass on my induction eye slide off, instead of buying another. It is better then the one I originally bought!

Scritto da: milleeran

Barely withstood 400° after curing for a week

I am sure it has its applications 600° is not one of them

Scritto da: Ot

Its Caulking

Was very fluid, made it easy to apply, to motor heads.

Scritto da: SoNatStone

Great high temp adhesion, slight off-gas at first burn

I used this to adhere and fiber-cement surround to a zero-clearance direct vent fireplace, seems to be working just fine after several uses. The only issue is we noticed a smell that resembled a hot engine bay during the first couple times we ran the unit after using this product. It hasn't completely gone away, but it is lessening with time. Totally worth it though for the working temp range of the product.