0
0

Ukupno:€ 0.00

Vidi kolicaProvjeri
LoginRegister
0

Ukupno:€ 0.00

Vidi kolicaProvjeri
LoginRegister

PacTool SS701 Snapper Škare - Škare za lim - Nastavak za bušenje s rezačem lima - Režite do 18-Guge pocinčani čelik, aluminij i bakar - Alati za lim - Stolarski alati i dodaci

Brand:PacTool

3.4/5

€
104.16

PacTool SS701 Snapper Shear pričvršćuje se na bilo koji motor bežične bušilice od 18 volti ili više, omogućujući vam rezanje pocinčanog čelika, aluminija i bakra debljine 18. Čišći je, brži i smanjuje metalne strugotine. Ergonomska univerzalna rotirajuća glava škara omogućuje vam jednostavno rezanje bilo kojeg oblika, štedi sate, dodaje praktičnost i pomaže eliminirati višak nereda na bilo kojem gradilištu. Odvojite i zamijenite istrošene oštrice od kaljenog čelika novim zamjenskim oštricama kako bi se posao mogao odvijati.

Iznos
Dodaj u košaricuKupi sada

EAN: 0645646701005

Kategorije Alati i poboljšanje doma, Električni i ručni alati, Električni alati, Škare, Škare i grickalice,

PACTOOL: Poznati smo po svojim proizvodima za izgradnju, renoviranje i preuređenje i specijalizirani smo za vrhunske alate za vanjske radove. Naša široka linija proizvoda pomaže obrtnicima i DIY majstorima da koriste prave alate, povećavajući produktivnost, kako bi obavili posao. ZAJAMČENA IZVEDBA: Možete vjerovati PacTool proizvodima da će pružiti izvanrednu izvedbu i pouzdanost. Ove škare su podržane PacTool-ovim jednogodišnjim jamstvom protiv grešaka u proizvodnji, pristajanja i završne obrade. ZAMJENJIVI NOŽEVI: Odvojite i zamijenite istrošene oštrice od kaljenog čelika novim zamjenskim kako biste nastavili s radom. Naše zamjenske oštrice prodaju se zasebno. SNAGA KROZ METAL: Reže pocinčani čelik, aluminij, bakar do 18 gauge i nehrđajući čelik do 20 gauge. Nastavak za rezanje PacTool SS701 reže čeličnu žicu, mrežu, vinil, aluminij, sporedni kolosijek, obrub, metalni krov i zavojnicu. PROFESIONALNA KVALITETA: Ove inovativne škare rade s bilo kojom akumulatorskom bušilicom od 18 volti ili više i omogućuju vam jednostavnu navigaciju tijekom rezanja. Alati za rezanje metala PacTool izrađeni su prema standardu koji zahtijevaju komercijalni izvođači radova.. ERGONOMSKA PREDNOST: Mogućnost rotacije glave univerzalnih škara za 360° pruža korisničko iskustvo u usporedbi s tradicionalnim škarama. Koristite škare za rezanje ravnih, pravih kutova, zakrivljenih rezova i rezanje krugova do 3 inča u promjeru. RADITE PAMETNIJI: Dizajn ovog nastavka električnih škara za bušilicu smanjuje strugotine metala tijekom uporabe, omogućujući profesionalcima i majstorima da s lakoćom režu i postavljaju, povećavajući učinkovitost i održavajući gradilište sigurnim.
Batteries Required? ‎No
Country of Origin ‎China
Customer Reviews 4.3 4.3 out of 5 stars 42 ratings 4.3 out of 5 stars
Included Components ‎
Item model number ‎SS701
Item Package Quantity ‎1
Item Weight ‎1.63 pounds
Manufacturer ‎PacTool
Part Number ‎SS701
Power Source ‎Battery Powered
Product Dimensions ‎2.5 x 7.13 x 2.65 inches
Style ‎Snapper Shear

3.4

8 Review
5 Star
55
4 Star
29
3 Star
12
2 Star
0
1 Star
4

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s*

Scritto da: OT
CUT NOT Straight
Its a good roduct and shear just fine. BUT HARD TO KEEP A STRAIGHT CUT!!!
Scritto da: Russell Martin
Heavy duty
The media could not be loaded.
Scritto da: Rico B.
Tool Requires Two Hands to Operate.
This tool is ideal for cutting pieces off a large metal sheet. The tool cuts through many different sheet metal gauges almost effortlessly and is a terrific addition to my toolbox. The cutters have a lot of cutting power and are sharp enough to leave a clean cut in the wake of the tool. The operation was slightly clumsy when the sheet metal would not hold still. You need to use a vice or cut a large enough piece of sheet metal that the part will not move. This tool is best operated with a helper because you need two hands to use the tool properly.
Scritto da: Kari31
Works pretty well
This works really well for what it is intended for and is easy to learn how to use.
Scritto da: frank farrar
General purpose. Not always better than old school.
I did like the cutting action with felt paper, vinyl siding trim, light rolled roofing, and expanded metal stucco backing when making long straight cuts in well secured sheets. Useful for materials that can be easily trimmed of that extra 1/4" of rough-cut material using more precise methods, either hand or cordless battery powered. For metal cutting this can work on a small project scale, but does not replace hole cutters, cordless jigsaws, or good quality hand shears. The advantage of fewer metal fragments is overstated, unless there is to be no cleanup trimming following the initial more or less rough cut. Yes, a jigsaw might be slower, but with a vacuum attachment there need not be much to clean up. With better control a single cut and a little grinder finishing, the job gets done without having to stop and deal with those nasty metal slivers, which are more or less unavoidable when any careful trimming is required. As always, it comes down to the frequency of the various useful procedures that can actually work. In my admittedly limited experience, a decent cordless jigsaw using top quality blades is the closest thing to a universal metal cutting tool. Slow, but precise. Not necessarily messy. Best of all, it doesn't generate a lot of metal heating issues, which is a great advantage of shears in general, by the way. If I had fifty bucks to spend on an improvement, I'd replace my worn-out jigsaw blades. If I were doing more occasional work in softer sheet materials, I'd definitely be happy with these low-cost cordless shears as a useful tool, where saw action can quickly get bogged down the moment the saw blade gets too warm to run ahead of the melting plastic or tar-infused component materials. In this case, the tool might fit the job well enough to be worth the cost for what it can do fairly well.
Scritto da: A.S.
Easy to get the hang of
These shears are a lot more convenient for me than using hand shears. You can cut metals up to about 18 gauge pretty easy. It cuts pretty strait as long as you keep the chuck tight. To make this tool work you have to have the material you are cutting very well secured so it doesn't move, since you have to keep both your hands on this shears as you use them.
Scritto da: Leo M.
It works as intended
Used the other day. Little awkward to use but it easily cut threw metal of an air conditioner cover. Wish the opening on the cutting blade was a little bigger but it worked fine on what I was doing
Scritto da: Thomas Reed
Effective Shears For Metal And Other Material
The Pac Tool shears were ordered for use in my workshop & around my house. This is an effective metal cutting tool for a DIY workshop and perhaps those who are professionals. In testing, what I found was that this tools is heavy when added to an 18V (or more) cordless drill and obviously must be used with 2 hands. The tool cut through the sheet metal easily with very little issue on straight cuts. Curved cuts were a little problematic. One thing that I would suggest in using this tool is some gloves and eye wear. I am particular to wearing protective eye wear when using cutting tools since small slivers are a possibility in these types of tools. Overall, I found this tool to be effective when cutting sheet metal and other metal up to 18 gauge. In addition, though I did not test this, it may be effective in cutting non-metalic material that is not extremely thick.

Povezani proizvodi

hot
Malco TSHD Turboshear teške škare za rezanje metala, crne
3.7/5

€ 171.64

Malco TSHD Turboshear teške škare za rezanje metala, crne
3.7/5

€ 171.64

hot
DEWALT škare za metal, okretna glava, 18GA (DW890), žuta
3.4/5

€ 360.11

DEWALT škare za metal, okretna glava, 18GA (DW890), žuta
3.4/5

€ 360.11

hot
PacTool SS724 Snapper Shear Pro - Alat za rezanje ploča od vlaknastog cementa - Električne škare Profesionalni električni alati Univerzalna glava škara / Priključuje se na bilo koju bušilicu za rezanje
3.5/5

€ 121.49

PacTool SS724 Snapper Shear Pro - Alat za rezanje ploča od vlaknastog cementa - Električne škare Profesionalni električni alati Univerzalna glava škara / Priključuje se na bilo koju bušilicu za rezanje
3.5/5

€ 121.49

hot
Grickalica zraka Ingersoll Rand 325B
2.7/5

€ 349.58

Grickalica zraka Ingersoll Rand 325B
2.7/5

€ 349.58

hot
Malco TSHD1 Automotive Heavy Duty 18 Gauge Turbo nastavak za bušilicu s smicanjem
3.7/5

€ 225.24

Malco TSHD1 Automotive Heavy Duty 18 Gauge Turbo nastavak za bušilicu s smicanjem
3.7/5

€ 225.24

hot
Astro pneumatski alat 727 ONYX Heavy Duty Air Nibbler
3.5/5

€ 107.21

Astro pneumatski alat 727 ONYX Heavy Duty Air Nibbler
3.5/5

€ 107.21

hot
Ingersoll Rand EC300 zračni alat za rezanje metala za rezanje do 18 čelika, aluminija, plastike i drugih metala, 6' u minuti, glava pod kutom, udoban rukohvat
3.4/5

€ 161.87

Ingersoll Rand EC300 zračni alat za rezanje metala za rezanje do 18 čelika, aluminija, plastike i drugih metala, 6' u minuti, glava pod kutom, udoban rukohvat
3.4/5

€ 161.87

hot
WEN škare za metal, zakretna glava, promjenjiva brzina, 18 kalibra, 4 ampera (3650)
3.5/5

€ 99.85

WEN škare za metal, zakretna glava, promjenjiva brzina, 18 kalibra, 4 ampera (3650)
3.5/5

€ 99.85

Otkrijte našu međunarodnu mrežu

Šaljemo u 28 zemalja, preko 200.000 proizvoda. Budite u toku, pretplatite se na newsletter.

Array

Ukupno:€ 0.00

Vidi kolicaProvjeri

Kategorije

Sve kategorije
Jelovnik Kategorije Blizu Košarica

Menu