OTC (522 veliki izvlakač zupčanika i remenica

Brand:‎NOCO

3.8/5

140.63

S OTC-ovim 522 velikim izvlakačem zupčanika i remenica možete jednostavno ukloniti širok raspon zupčanika, remenica ili drugih dijelova koji imaju rupe s narezima. Jednostavan je za korištenje i spremanje. Vrijednost je srž portfelja OTC alata i opreme. Bilo da se radi o jednostavnom popravku ili najsloženijem problemu upravljivosti, ovi nagrađivani alati univerzalno rješavaju probleme brže i po boljoj vrijednosti od bilo koje druge dostupne linije proizvoda. Bilo da se radi o specijalnom alatu ili jedinstvenom dijelu servisne opreme, OTC pruža vrhunska rješenja za izazove modernih automobilskih servisa dok povećava produktivnost tehničara i profit trgovine.

EAN: 0031113145821

Kategorije Automobilizam, Alati i oprema, Izvlakači, Setovi izvlakača,

Slično Fordu D80L-522-A i 303-D025. Prilagođava sve vijke s kapom promjera do 1/2 inča. Vijak za potiskivanje je dugačak 3/4 inča-16 x 11-5/8 inča. Širenje od 2 inča do 7-3/4 inča; blok je širok 8-1/4 inča. S OTC-ovim 522 velikim izvlakačem zupčanika i remenica možete jednostavno ukloniti širok raspon zupčanika, remenica ili drugih dijelova koji imaju rupe s narezima.
Brand ‎NOCO
Country of Origin ‎USA
Customer Reviews 4.7 4.7 out of 5 stars 363 ratings 4.7 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎522
Item Weight ‎4.1 pounds
Manufacturer ‎OTC
Manufacturer Part Number ‎522
Model ‎OTC
OEM Part Number ‎522
Product Dimensions ‎3.1 x 2.2 x 13.2 inches

3.8

13 Review
5 Star
86
4 Star
8
3 Star
3
2 Star
1
1 Star
2

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s*

Scritto da: Amazon Customer
geat tool
good tool
Scritto da: KSBird2005
Tough.
This is a great option for pulling motors and gearboxes off of shafts. Using gear pullers never worked well for this application due to uneven shapes and lack of grab area. With this I can just grab a couple bolts and pull off very stubborn motors.
Scritto da: F. Rotello
Good Puller
I read some of the 1 star reviews and honestly I can not see what they were complaining about. This tool cost me $60 and is WAY better than a $10 one you buy at "China-Tools-R-Us"... if you get my meaning. The Tool is square and the bore is straight, NONE of the $10 pullers will share those traits. Yes the threads are a little rough, however all you have to do is put a little oil on the threads and spin the extractor rod all the way through and it will smooth it out. If you want flawless go buy an Enerpac a $200 to $300, that's what my Industrial service company uses. Otherwise your lawnmower flywheel will never know the difference. This is a great tool for a homeowner or auto shop.
Scritto da: Amazon Customer
Must have tool
I use this puller for all sorts of task.
Scritto da: Mike Asher
Heavy Duty Gear puller
I attached this puller and about 1 good Complete turn it literally jumped off the shaft
Scritto da: Scott Whitehead
Good puller.
Cheaper than Snap-On and seems to be the same quality. I use it at least once a week pulling differential yokes on tractor trailers to do pinion seals.
Scritto da: Gary E. Hoenig
Did the tough job
Did the tough job after I had tried everything else. Glad to have this tool in my arsenal.
Scritto da: Matthew Rushing
Indestructible puller
Used it to pull the blade holder assembly off a 285 Bush Hog mower. Had tried everything, even a 12 ton hydraulic puller wouldn't budge it. Rigged this up to it using a couple of Grade 8 1/2 inch bolts, using a 1 inch air hammer (this thing has like 2500 lbs. of torque), heat, and a 10 lb. maul finally broke it loose. Bent the bolts, pulled the 1/2 inch nuts right off the threads, but this puller didn't break and to my amazement the puller bolt didn't even bend. Best 50 bucks I ever spent.
Scritto da: MCatSHF
100%!!! HAPPY HAPPY HAPPY!!! Exactly as described, priced right & fast shipment.
100%!!! HAPPY HAPPY HAPPY!!! Exactly as described, priced right & fast shipment.
Scritto da: Amazon Customer
great tool
right tool for the job. worked great time saver
Scritto da: Randy Frattinger
Good Quality
The tool is as described and works great.
Scritto da: Evan
Works well
Performed as needed. Would be nice to have a swivel end on the threaded rod
Scritto da: Doug Burton
Built for tanks
Wow.... what a beast. If this doesn’t work. Nothing will...

Povezani proizvodi

hot
Vučna osovina stražnja Toyota
3.3/5

€ 530.04

Vučna osovina stražnja Toyota
3.3/5

€ 530.04

hot
Lisle 40100 skidač glavčine, crni
3.7/5

€ 183.58

Lisle 40100 skidač glavčine, crni
3.7/5

€ 183.58

Otkrijte našu međunarodnu mrežu

Šaljemo u 28 zemalja, preko 200.000 proizvoda. Budite u toku, pretplatite se na newsletter.

Array