0
0

Ukupno:€ 0.00

Vidi kolicaProvjeri
LoginRegister
0

Ukupno:€ 0.00

Vidi kolicaProvjeri
LoginRegister

NEIKO 01902 Podesiva ruka za pomoć s povećalom, treća ruka za lemljenje, postolje za žicu za lemljenje s dvostrukim aligatorskim kopčama i teškom bazom, alati za izradu perli i nakita, držač za lemljenje

Brand:Neiko

3.4/5

€
32.76

Alat za pomoć s povećalom. Izdržljiva baza od lijevanog željeza. 2-1/2-inčno, 2X povećalo za precizan rad bez naprezanja očiju. Dvostruke stezaljke od aligatorske opruge čvrsto drže radni komad.

Iznos
Dodaj u košaricuKupi sada

EAN: 756554746481

Kategorije Umjetnost, obrt i šivanje, Povećala,

STANICA ZA LEMLJENJE S TEŠKOM BAZOM: Čvrsta baza od lijevanog željeza drži jedinicu uspravnom i stabilnom te pruža sigurno držanje koje drži predmete stabilnima tijekom rada na komponentama ili lemljenja. Izvedite čak i najfiniji posao s ovim korisnim alatom. PODESIVA RUKA ZA POMOĆ: Ogledalo i stezaljke postavljeni su na podesive kuglaste zglobove za postavljanje i pregled rada pod bilo kojim kutom i služe kao dodatne ruke za gledanje predmeta pod najtežim kutovima s lakoćom. STALAK S DVOSTRUKOM KLOPOM: Dvostruke opružne stezaljke od krokodila pričvršćene su za držače žice na podesivim krakovima koji sigurno drže komponente, radne dijelove, malu elektroniku i uređaje za zadatke lemljenja koji zahtijevaju točnost i učinkovitost. POVEĆALO S POSTOLJEM: Ova pomoćna ruka za lemljenje opremljena je povećalom od 2x na podesivoj ruci za izvođenje preciznih radova čak i na najmanjim predmetima ili obradacima. S ovim alatom možete postići gotovo savršene rezultate. POMOĆNA STANICA ZA RUČNO LEMLJENJE: Ovaj koristan alat oslobađa vaše ruke za sigurno lemljenje, lijepljenje, pozicioniranje, pričvršćivanje i sastavljanje predmeta malih do velikih dimenzija za zadatke koji zahtijevaju visoku razinu preciznosti, kao što je avionika.
Batteries Included? ‎No
Batteries Required? ‎No
Customer Reviews 4.3 4.3 out of 5 stars 11,928 ratings 4.3 out of 5 stars
Included Components ‎Includes: 1 x Neiko 01902 Adjustable Helping Hand With Magnifying Glass | Dual Alligator Clips
Is Discontinued By Manufacturer ‎No
Item model number ‎01902
Item Package Quantity ‎1
Item Weight ‎10.9 ounces
Manufacturer ‎Ridgerock Tools Inc.
Material ‎Cast iron
Number Of Pieces ‎1
Part Number ‎01902
Power Source ‎Hand Powered
Product Dimensions ‎5 x 3 x 2.68 inches
Size ‎1-Pack

3.4

13 Review
5 Star
62
4 Star
19
3 Star
11
2 Star
4
1 Star
5

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s*

Scritto da: Mark
Works great
Bought this to help soldering wires on long projects. Works great, haven't had any issues with the clamps and everything works as advertised. Wish the base was slightly wider to give it a little more stability, other than that a great set of hands.
Scritto da: JBrough
It literally IS my third hand
If you need to have a third hand this product fits the bill. I use it all the time because it allows me to use my second hand (and sometimes my firsthand) for other things. A must have for the house or shop.
Scritto da: Teresa Finney
Magnifying glass with arms
This item is alot of help with the extra arms to hold small items and be able to see what your trying to do.
Scritto da: Paul H.
Not bad for the price!
Seeing that I read the reviews before purchasing this item, the first thing I did when I received was to solder the clips to the adjustment rod and ball. And I drilled a small hole in the base and screwed it to my work bench so it will not fall over. I use it for holding HO scale model train parts for soldering and other small things in 1/87th scale so the size is perfect for my needs.
Scritto da: Cheryl B.
Just what I needed!
The base is nice and heavy enough for jewelry making. The arms and clips are easily movable. The price is great!
Scritto da: Mary Avery
Finally I can see!
This is an amazing tool to have on hand if you are hard of sight or working on small detailed projects. I have been creating creatures from clay and painting resin miniatures, which my eyes were not made for. This has helped so much, ensuring I get the details as realistic as possible. One of my miniatures has tiny frogs on it, I swore I had no idea they were there until I started painting. That is how small they are. This magnify glass helped me see their tiny toes and eyes, instead of me just painting them a single color, I was able to add depth. It is my first of these, and I do have trouble getting it in the right position without falling over. I would say for a beginner there is a learning curve, but well worth it. It is heavier due to the good materials, but not so heavy you can't carry it around without.
Scritto da: Brax
Works OK
Appears to be OK
Scritto da: Richard Flinkstrom
It acts as a third hand.
The magnifying glass helps to see proper soldering.
Scritto da: Aidan Owen
Utter garbage
The media could not be loaded. Not only will the alligator clips come loose very quickly, making this useless for holding anything in place, it also is not properly weighted at all. It has a tendency to fall over forwards, which I found out the hard way after it fell off my workstation and COMPLETELY DESTROYED the project I was working on. If you value the time you spend working and don’t want it all to amount to nothing, DO NOT BUY THIS JUNK.
Scritto da: Guillaume
Not bad, but consider this…
(French review below) The structure and pieces are well made except for the alligator clamps. The clamps were held into place only by pressure (soft metal is wrapped/bent around the structure, no solder, no adhesive). Both of mine fell off quickly, before the first job … On the bright side, it can easily be fixed with metal adhesives or soldering. The stand is heavy enough to stay upright when holding small Printed Circuit Boards or wires but will topple over if clamps are extended at the maximum. Again this can be fixed by adding weight to the base or by using fastening clamps. Bottom line: The overall product is decent considering I paid 10$ for it. Flaws can be corrected if you are willing to tinker with it. ——— La structure et les pièces sont assez solides à l’exception des pinces. Elles ne tiennent en place que par pression (la base de metal mou est pincé sur une tige). Résultat de tout ça, mes deux pinces sont tombées avant la première job… C’est toutefois possible de corriger le problème avec une colle pour métal ou de la soudure. Le support est assez pesant pour soutenir de petits circuits imprimés ou des fils, mais il basculera si les pinces sont étendues à la capacité maximale. Le problème peut se corriger en ajoutant du poids à la base ou en attachant la base avec des serres. Conclusion : Le produit est décent considérant que je l’ai eu pour 10$. Les défauts peuvent être corrigés si vous êtes bricoleurs.
Scritto da: Tony D
Muy ligero y se vive cayendo por ello.
Funciona para lo básico de detener piezas muy ligeras como tablillas a soldar y cosas por el estilo, el principal problema es que a diferencia de uno que compré en los años 80s, la base es bastante más ligera y con cualquier cosa por arriba de los 50gms en un ángulo de los brazos extendidos se vive cayendo porque el peso lo vence, si no quieres tener que estarlo pegando con cinta a tu mesa de trabajo para que aguante, busca otra opción, le doy 3 estrellas porque medio funciona y el precio que pague es muy económico pero no lo volvería a comprar sabiendo esto que comento.
Scritto da: Emilio Lozano
Buen soporte, pero...
Es un soporte bueno, económico, la lupa te ayuda mucho, se puede guardar fácilmente, pero el problema son las mordazas, aprietan demasiado duro que lastiman los circuitos que quieres soldar y eso no me agradó. Les puse cinta de aislar al rededor, pero ya no aprietan de la misma forma, motivo por el cuál compré otro que no usa mordazas, ajustas la presión entre el soporte de goma y el circuito, la diferencia no fue mucha. Es muy bueno por el precio, pero si tienes la posibilidad de invertir un poco más, puedes conseguir algo mejor.
Scritto da: Catherine Pruissen
Okay for what I need
This item is "okay" for what I need, however, I have not tried it on my finer jewelry for repairs. The magnifying glass is not great. My biggest complaint was that it did not have instructions on how to put it together. I had to go back to Amazon to enlarge the pictures to figure it out. Also, I do not understand why there was not a thumbscrew on the movable part of the magnifying glass like there were on the rest of the product. Had to use a screwdriver, and will continue to have to do so every time I want to move the magnifying glass down the arm. This is inconvenient. Hopefully, it will prove its worth the more I use it. At the price point, you really can't expect more.

Povezani proizvodi

hot
NEIKO 01902 Podesiva ruka za pomoć s povećalom, treća ruka za lemljenje, postolje za žicu za lemljenje s dvostrukim aligatorskim kopčama i teškom bazom, alati za izradu perli i nakita, držač za lemljenje
3.4/5

€ 32.76

NEIKO 01902 Podesiva ruka za pomoć s povećalom, treća ruka za lemljenje, postolje za žicu za lemljenje s dvostrukim aligatorskim kopčama i teškom bazom, alati za izradu perli i nakita, držač za lemljenje
3.4/5

€ 32.76

hot
Carson FreeHand 2,5x LED osvijetljeno ručno ili hands-free povećalo s 5,5x točkastim objektivom (FH-25) FreeHand (FH-25)
3.4/5

€ 43.24

Carson FreeHand 2,5x LED osvijetljeno ručno ili hands-free povećalo s 5,5x točkastim objektivom (FH-25) FreeHand (FH-25)
3.4/5

€ 43.24

hot
Carson Lighted MagniGrip 4,5x LED osvijetljeno povećalo s preciznim pincetama (MG-88) MagniGrip Lighted (MG-88)
3.5/5

€ 40.51

Carson Lighted MagniGrip 4,5x LED osvijetljeno povećalo s preciznim pincetama (MG-88) MagniGrip Lighted (MG-88)
3.5/5

€ 40.51

hot
LoRan LM-1 Line Magnifier, Clear
3.6/5

€ 42.72

LoRan LM-1 Line Magnifier, Clear
3.6/5

€ 42.72

Otkrijte našu međunarodnu mrežu

Šaljemo u 28 zemalja, preko 200.000 proizvoda. Budite u toku, pretplatite se na newsletter.

Array

Ukupno:€ 0.00

Vidi kolicaProvjeri

Kategorije

Sve kategorije
Jelovnik Kategorije Blizu Košarica

Menu