Gorilla 2-dijelni epoksid, 5-minutni set, štrcaljka od 0,85 unce, prozirna, (pakiranje od 2) 2 pakiranja

Name: Gorilla 2-dijelni epoksid, 5-minutni set, štrcaljka od 0,85 unce, prozirna, (pakiranje od 2) 2 pakiranja
Brand: Gorilla
SKU: 052427006363
Price: 40.26 EUR
Availability: InStock

Brand:Gorilla

3.6/5

€
40.26

Gorilla podiže epoksid na novu razinu— Gorilla otpornu razinu. Sa svojom vrhunskom otpornošću na otapala i vodu, Gorilla epoksidno ljepilo je nevjerojatno snažno i izdržljivo za popravke u kućanstvu i automobilima. Štrcaljka jednostavna za korištenje drži epoksidnu smolu i učvršćivač odvojenima, tako da se lako dozira i neće se stvrdnuti tijekom vremena. Dvodijelna formula za popunjavanje praznina lako lijepi čelik, aluminij, staklo, drvo, keramiku, pločice i većinu plastike. Osim toga, suši se u idealnoj, kristalno čistoj završnici koja čini da projekti izgledaju besprijekorno. Upute: 1. Pripremite svoj radni prostor i površinu: preporučuje se korištenje Gorilla epoksida u dobro prozračenom prostoru. Pripremite površinu: za poboljšanje prianjanja, glatke površine prije lijepljenja nahrapavite. Zatim očistite i osušite sve površine koje se lijepe. 2. Miješanje Gorilla epoksida: uklonite crni čep. S vrhom usmjerenim prema gore, odrežite ili skidajte kraj s vrha šprice. Dok je vrh još uvijek usmjeren prema gore, uklonite zrak i osigurajte ravnomjerno nanošenje polaganim guranjem klipa dok i smola i učvršćivač ne budu na vrhu. Gurnite klip da raspršite ravnomjerne količine smole i učvršćivača na čistu, jednokratnu, zatvorenu površinu. Miješajte dva dijela oko 20 sekundi, dok se smjesa ne ujednači. 3. Primjena: nakon završetka miješanja, nanesite Gorilla epoksid unutar 5 minuta. Epoksidna smjesa nastavit će se zgušnjavati i snaga veze će se smanjivati što duže čekate na nanošenje. 4. Stezanje: kako biste postigli maksimalnu čvrstoću spoja, stegnite zajedno i ostavite neometano. Važna vremena stvrdnjavanja: postavite: 5 minuta za nanošenje i pozicioniranje rukovanje: ostavite da se stvrdne 30 minuta neometano (bez težine ili rukovanja) konačno stvrdnjavanje: ostavite 24 sata za skladištenje nosivosti težine: za zatvaranje, lagano povucite klip unatrag. Obrišite vrh suhom krpom i poravnajte urez na vrhu i kapici. Čvrsto zatvoriti. Kliknite vezu Gorilla na vrhu ove stranice kako biste vidjeli više finih proizvoda tvrtke Gorilla glue.

Nema dostupnih jedinica

EAN: 052427006363

Kategorije Industrijski i znanstveni, Ljepila, brtvila i maziva, Epoksi, Epoksidi punjeni metalom,

Štrcaljka jednostavna za korištenje; odvojene bačve smole i učvršćivača sprječavaju stvrdnjavanje epoksida, plus štrcaljka ravnomjerno raspoređuje i uključuje čep za višestruku upotrebu. set od 6 minuta; dovoljno vremena za ponovno pozicioniranje za savršeno pristajanje. Suši se prozirno; idealno za čistu, laku završnu obradu. Najbolje za teške popravke koji zahtijevaju izdržljivu vezu, popunjavanje praznina i otpornost na otapala. Snažan, postojan, brz i popunjava praznine; izvrstan za primjenu na više površina.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Gorilla
Brand	‎Gorilla
Color	‎Gorilla 4200101-2 Epoxy
Compatible Material	Aluminum,wood,ceramic,automotive,glass,steel,plastics
Compatible Material	‎Aluminum,wood,ceramic,automotive,glass,steel,plastics
Country of Origin	‎USA
Customer Reviews	4.6 4.6 out of 5 stars 15,977 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Full Cure Time	‎24 Hours
Included Components	‎Pack of 2
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Form	Ounce
Item Form	‎Ounce
Item model number	‎4200130
Item Package Quantity	‎1
Item Volume	‎2.1 Fluid Ounces
Item Weight	‎2.64 ounces
Manufacturer	‎Gorilla Glue
Material	ALL
Material	‎ALL
Package Information	‎Syringe
Part Number	‎4200130
Product Dimensions	‎11 x 8 x 1 inches
Size	‎2 Pack
Special Feature	Clear,Strong
Special Feature	‎Clear,Strong
Special Features	‎Clear,Strong
Warranty Description	‎1
Water Resistance Level	‎Water Resistant

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s^*

Vaša ocjena

Scritto da: MedicFirefighter

Works better.

This works better than the other glues and adhesives that I’ve used that have been “specifically” designed for jewelry making and crafting. Have always been thrilled with Gorilla Glue brand. Should’ve used it to start with instead of dorking around with the other stuff.

Scritto da: Haley JoAnna

Soooo strong

My kid can destroy anything and he's only 1. I used this to stick fidget spinners to a peg board and he can't pull them off at all! He keeps trying though!

Scritto da: TheEngineer

Sets Fast - Challenging to Mix Well for Large Repairs

In the bathroom, we have cultured marble countertops and a matching (vertical) surround on the jacuzzi-style tub. While removing the tub surround to do some plumbing repairs, a hairline crack formed on one end of a 6ft panel, reaching roughly 2 ft in length. Rather than replace the panel, I decided to epoxy a 3/8" plywood splint to the back of the panel, to maintain alignment of the two sides and hopefully prevent the crack from propagating further. I've used Gorilla adhesives before for woodworking projects, so I chose this epoxy product for the job. My plan was to spread a thin layer of mixed epoxy on the back surface of the panel and then lay the plywood directly on it to form the splint. So - My product-use experience: The Gorilla Epoxy package instructions call for first inverting the syringe and bleeding air out of both sides, to assure smooth flow of the two components. Makes sense. These materials are very viscous however and one side cleared faster than the other, suddenly shooting a blob of liquid out the end - It was startling and was met with a few choice words as I scrambled to clean up the tile floor. The tiny plastic mixing stick (found between the two plungers and essentially a fat toothpick) is nearly useless when you have a large area to cover and need to rapidly blend a lot of epoxy - remember that this stuff has a 5-minute set time. I smeared it around rapidly with the stick, but I doubt the result was homogeneous. When I set the plywood on top, I immediately moved it around clockwise, then counter-clockwise to better-smear/blend the two components. I then set full 1-gal paint cans on top of the plywood, as there is no easy way to clamp this together, and I gave it 24 hours to cure. The next day, there was some clear, mildly sticky bleed-out along the edges of the plywood. It looked sloppy, but that side isn't visible once the panel is installed so... Fortunately, the epoxy seems to have fused the plywood to the stone panel fairly well. I doubt that I achieved the intended 3300psi bond strength, but this panel serves a largely a cosmetic service so there's not really much load on it. I wouldn't call the process "easy-to-use", but the plywood splint looks like it's doing its job and the panel is now reinstalled. The hairline crack is barely visible, so as long as the panel doesn't move any more, we should be good. Close-enough I guess. Rating: They lose stars for the difficulty of following their instructions, but They get more stars for making a product that sticks well even when the directions aren't followed

Scritto da: M.

Mostly good.

Good epoxy. It takes over night to really harden so don't think you're done after 5 minutes. Pushing epoxy and harder out at same time is wasteful and difficult. I cut the two plungers apart and things are much more controllable.

Scritto da: Robert Yarger

Darn good

Used to set magnets into wood. Starts setting in about 5 minutes. Mixture usable for about 10 minutes. Missing a star because sets in 5 minutes means the same as "2×4" or "gross earnings before taxes."

Scritto da: ed k

strong hold

This worked great for what I bought it for. I had a little trouble pushing the plungers on both tubes as needed but other than that it was easy to mix and apply.

Scritto da: Dude

Works great

Always had good experiences with this product

Scritto da: virginia risley

Wonderful

Great product easy to use no no

Scritto da: Eric

Very little quantity!

Good overall product but very little quantity, barely enough to make a couple of repairs. And quite expensive for that little package. Also, make sure to wear latex gloves when using this because you will most likely get some on your hands or other parts. Also use a long stick. Messy stuff!

Scritto da: Jamie blancard

Works great on Ceramic

This exceeded my exceptions and more! I had shattered a ceramic Mrs Claus teddy bear ornament last Christmas and thus shattered my own heart and possibly that of my Mother’s. I gathered up the shards, determined to fix it only to have it sit on my desk for 11 months and get broken twice more. I finally ordered the glue and put my mind to getting it fixed. It’s not perfect and there are definitely some missing chunks but she is back to her old self looking as sweet as ever

Scritto da: Amazon Customer

Strong, dries clear and can be used on multiple surfaces.

I have never had to use epoxy glue before, but this is the absolute best. It dries clear and easy to use. I had to glue the spout on my China coffee spout which broke off during delivery. This glue is strong and wait for about 5 minutes, the job is done. I would be surprised if otherwise. It is also waterproof. Highly recommend it. You won't be disappointed.

Scritto da: David Horkoff

Reliable!

This did exactly what I bought it for, gluing plastic to metal. You get what you expect with this product.

Scritto da: mimi

Excellent

People wrote reviews saying its hard to put the cap on it for future use, I believe they didn't know which was the cap to close it. The black center piece you break off before using is the cap. I had no problems putting the cap on to store for later use. Very good product