CURT 56320 Prilagođeni 4-pinski kabelski svežanj za prikolicu na strani vozila, odgovara odabranom Ford Escapeu

Name: CURT 56320 Prilagođeni 4-pinski kabelski svežanj za prikolicu na strani vozila, odgovara odabranom Ford Escapeu
Brand: CURT
SKU: 0612314563203
Price: 117.09 EUR
Availability: InStock

Brand:CURT

3.5/5

€
117.09

Ako vaše vozilo nije opremljeno ožičenjem za vuču prikolice, CURT prilagođeno ožičenje je idealno rješenje. Prilagođeni kabelski svežanj -- koji se naziva i T-priključak -- je jednostavan, plug-and-play električni uređaj koji se uključuje u električni sustav vašeg automobila i pruža standardnu, univerzalnu vezu žica prikolice. To se radi pomoću dva ili više OEM-kompatibilnih konektora specifičnih za vozilo za priključivanje u sklop stražnjeg svjetla, eliminirajući potrebu za rezanjem, spajanjem i lemljenjem tijekom instalacije. Prilagođeni kabelski snopovi izrađeni su za pojedina vozila i iako nisu dostupni za sva vozila, nude jedan od najbržih, najlakših i najsigurnijih načina povezivanja vozila za vuču. Ovaj posebni kabelski svežanj ima 4-smjernu ravnu utičnicu i dizajniran je kao prilagođeni kabelski svežanj koji odgovara određenim godinama Ford Escapea (za provjeru kompatibilnosti vašeg vozila, pogledajte informacije o aplikaciji). Dolazi sa svim potrebnim komponentama ožičenja za uspostavljanje pouzdane veze ožičenja prikolice, kao i poklopcem za prašinu koji održava konektor čistim kada se ne koristi. Na umu imate sliku svog sljedećeg odredišta -- možda je to čamac koji pristaje na vašem omiljenom mjestu za pecanje, možda je to kamp s pogledom na jedno od remek-djela prirode ili je to možda sljedeće veliko gradilište. Međutim, pretvaranje te slike u stvarnost zahtijeva više od pukog sanjarenja. Potrebna je čvrsta veza i odgovarajuća količina snage. CURT prilagođeno ožičenje izrađeno je pomoću neke od najsofisticiranijih tehnologija u industriji i dizajnirano je za jednostavnu ugradnju, dajući vam dugotrajnu električnu vezu za postavku kuke za vuču.

Iznos

Dodaj u košaricu Kupi sada

EAN: 0612314563203

Kategorije Automobilizam, Zamjenski dijelovi, Rasvjeta i elektrika, Električni, Ožičenje,

POKLOPAC ZA PRAŠINU. Kako bi se potaknula dugotrajna upotreba i otpornost na vremenske uvjete, ovaj 4-polni kabelski svežanj za rasvjetu prikolice dolazi s gumenim poklopcem za prašinu. Lako se postavlja na 4-smjerni ravni konektor kada nije u upotrebi, štiteći ga od vanjskih elemenata. POUZDANA SNAGA. Ovaj 4-smjerni kabelski svežanj prikolice izrađen je tehnologijom površinske montaže. Ova vrsta strujnog kruga stvara manje topline, ima optimalan intenzitet svjetlosti i izdržljive performanse. SPECIFIČNO ZA VOZILO. Ovaj naknadni, kabelski svežanj za vozilo-prikolicu dizajniran je za odabrane godine Ford Escapea. STANDARDNI PRIKLJUČAK. Ovo priključno 4-plosnato ožičenje prikolice može se koristiti za spajanje stražnjih svjetala prikolice, signalnih svjetala kočnica i pokazivača smjera. 4-smjerno ožičenje svjetla za prikolicu popularno je na raznim prikolicama, dodajući raznovrsne mogućnosti vuče za vaše vozilo. LAGANO ZA UGRADNJU. Nema rezanja! Bez spajanja! Ovaj komplet kabelskog snopa prikolice uključuje se u postojeću tvorničku instalaciju na vašem vozilu i oprema ga standardnim, stražnjim 4-pinskim priključkom za ožičenje prikolice za priključivanje i vuču prikolice.

Brand	CURT
Brand	‎CURT
Connector Type	Plug-in
Country of Origin	‎Mexico
Customer Reviews	4.5 4.5 out of 5 stars 254 ratings 4.5 out of 5 stars
Exterior	‎Painted
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	9 x 6 x 3 inches
Item model number	‎56320
Item Weight	1.72 Pounds
Item Weight	‎1.72 pounds
Manufacturer	‎CURT
Manufacturer Part Number	‎56320
Material	Rubber
Model	‎Custom Wiring
OEM Part Number	‎56320
Product Dimensions	‎9 x 6 x 3 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s^*

Vaša ocjena

Scritto da: phillip scarboro

Great easy installation

This product is a plug and play interface with the factory wiring. All you have to do is run a power wire to the battery from the back.

Scritto da: Larry

Works as it should, a lot of plastic has to be removed

The unit works great, but a lot of plastic and spare tire has to be removed

Scritto da: Bangster

Very infrequent towing of a Horrible Fright folding trailer that I upgraded to the LED ...

This one actually fits my 2017 Escape, I should have done more due diligence and not listened to Amazons "this will fit your car" for the harness for the 2013-2016 Escape. I did cut it up so I didn't have to make hack and make giant holes for the entire connector to pass through to the tail lights, and I didn't run the wire to the front to the battery, but I utilized a fuse tap and the cargo area fuse panel, 5 feet of wire versus 20 running under the car. Everything was long enough, only part of the instructions I read was what side the single green wire went to. I was going to reverse engineer it to mount the box on the passenger side close to the power, but decided I might be pushing my luck. I chose to keep the 4 pin end bundled up in the spare tire well and will feed it out the lift gate bottom/gasket when connecting to a trailer. Tested it with a small light tester and with the trailer itself, everything works, doesn't cause any issues with the vehicle's lights. Very infrequent towing of a Horrible Fright folding trailer that I upgraded to the LED lights, but I am sure this would have driven the incandescent lights as well. Might try that out if I get a cargo hauler and feel it might cover the tail lights, toss the shipped lights on it. Easy to install, like that it is inside the vehicle and not mounted outside and wires ran outside, but were I live it really wouldn't matter.

Scritto da: GARY L GOLDSMITH

Works great.

Not really that hard to install. Took me maybe 2 hours taking my time. I'm still not sure why the vendor opposes connecting the power source wire to the extra fuse panel in the rear of a 2018 Ford Escape Titanium ! It has constant power ! Using something like the AutoEC ATO ATC 21AMP Add-A-Circuit Fuse Holder Fuse Box Tap Kit would work fine. But since they don't support that Option I ran it to the battery which was pretty simple on the Escape hiding it above the drivers skid pan . I will also say I could not get the harness end inside the CURT 58300 Vehicle-Side Trailer Wiring Harness Mounting Bracket for 4-Way Flat. I tried everything

Scritto da: Ron

Easy install

Ford installed there version at the dealership when first owner purchased. After we bought car used, we later found out that brake lights didn't work for towing. Purchased this unit and installed the correct way. Works perfect.

Scritto da: Jake W ia

Fast "Plug & Play" Install. Under 1hr and done.

Installed by myself on my 2018 Ford Escape (SEL) Perfect!!! Install took just under 1hr with the right tools and a general idea of where to run and hide the wires. Direct Plug and Play set up with only wiring work needed was positive terminal hook up. Saved a couple hours compared to a universal wiring kit where you'd have to hunt down each wire coming off your tail light to splice into. Not to mention you'd have to alter factory wiring.. with this kit, you do not alter any factory wiring at all! All my trailer lights work perfectly when plugged into this harness. And I couldn't beat the Amazon Warehouse Pricing!!!

Scritto da: Benjamin Sutton

Perfect fit for 2017 Ford Escape Titanium

Had some issues finding a wiring harness that would fit my 2017 Ford Escape Titanium. After some research I found this product along with installation instructions on eTrailer's Youtube. It fits just as advertised! As for the product itself, I was impressed with how easy it was to install, even if it didn't come with the best instructions (just watch the video instead!). I drove over 600 miles this weekend hauling a small trailer with LED lights and had no issues. If you are looking for a trailer wiring harness for your 2017 Ford Escape Titanium, this is what you need!

Scritto da: Kathryn S

Mostly good

Does NOT work with the Hopkins 48595 mounting bracket as another review mentioned. The shape is completely different. I'm mostly happy with this wiring harness for my 2017 Ford Escape Titanium. I was able to get all of it installed myself. I ran the power wire to an unused fuse in the cargo area fuse box. My only negative is that the instructions have no mention of the fact that my Escape has some sort of part in the way of where it says to mount the black box. I had to zip tie the box beneath that same metal piece.

Scritto da: Greg B.

Returned defective.

Got a defective one, 1 of the circuits didn't work had to return. Refund no problem. Got a second one works great have used Curt products on other vehicles with no problem.

Scritto da: Customer

Positive purchase.

Ease of installation and worked as advertised.

Scritto da: vern

Worked perfectly

Easy to install, good instructions, worked as described

Scritto da: TaylorMartine

Included instructions are bad

I was able to install this easily after looking up a video with much better instructions.

Scritto da: waveyq

Worked for my car

followed instruction to install it. not easy one but worked finally.