CURT 56016 Prilagođeni 4-pinski kabelski svežanj za prikolicu na strani vozila, odgovara odabranoj Mazdi 2 Hatchback, 5, CX-9, crna

Name: CURT 56016 Prilagođeni 4-pinski kabelski svežanj za prikolicu na strani vozila, odgovara odabranoj Mazdi 2 Hatchback, 5, CX-9, crna
Brand: CURT
SKU: 0612314560165
Price: 105.08 EUR
Availability: InStock

Brand:CURT

3.7/5

€
105.08

Ako vaše vozilo nije opremljeno ožičenjem za vuču prikolice, CURT prilagođeno ožičenje je idealno rješenje. Prilagođeni kabelski svežanj -- koji se naziva i T-priključak -- je jednostavan, plug-and-play električni uređaj koji se uključuje u električni sustav vašeg automobila i pruža standardnu, univerzalnu vezu žica prikolice. To se radi pomoću dva ili više OEM-kompatibilnih konektora specifičnih za vozilo za priključivanje u sklop stražnjeg svjetla, eliminirajući potrebu za rezanjem, spajanjem i lemljenjem tijekom instalacije. Prilagođeni kabelski snopovi izrađeni su za pojedina vozila i iako nisu dostupni za sva vozila, nude jedan od najbržih, najlakših i najsigurnijih načina povezivanja vozila za vuču. Ovaj konkretni kabelski svežanj nudi 4-smjernu utičnicu s ravnim konektorom i dizajniran je kao prilagođeni kabelski svežanj koji odgovara određenim godinama modela Mazda 2 hatchback, Mazda 5 i Mazda CX9 (za provjeru kompatibilnosti vašeg vozila, pogledajte informacije o aplikaciji). Dolazi sa svim potrebnim komponentama ožičenja za uspostavljanje pouzdane veze ožičenja prikolice, kao i poklopcem za prašinu koji održava konektor čistim kada se ne koristi. Na umu imate sliku svog sljedećeg odredišta -- možda je to čamac koji pristaje na vašem omiljenom mjestu za pecanje, možda je to kamp s pogledom na jedno od remek-djela prirode ili je to možda sljedeće veliko gradilište. Međutim, pretvaranje te slike u stvarnost zahtijeva više od pukog sanjarenja. Potrebna je čvrsta veza i odgovarajuća količina snage. CURT prilagođeno ožičenje izrađeno je pomoću neke od najsofisticiranijih tehnologija u industriji i dizajnirano je za jednostavnu ugradnju, dajući vam dugotrajnu električnu vezu za postavku kuke za vuču.

Iznos

Dodaj u košaricu Kupi sada

EAN: 0612314560165

Kategorije Automobilizam, Vanjski dodaci, Proizvodi za vuču i vitla, Pribor za kuku, Ožičenje,

POKLOPAC ZA PRAŠINU. Kako bi se potaknula dugotrajna upotreba i otpornost na vremenske uvjete, ovaj 4-polni kabelski svežanj za rasvjetu prikolice dolazi s gumenim poklopcem za prašinu. Lako se postavlja na 4-smjerni ravni konektor kada nije u upotrebi, štiteći ga od vanjskih elemenata. POUZDANA SNAGA. Ovaj 4-smjerni kabelski svežanj prikolice izrađen je tehnologijom površinske montaže. Ova vrsta strujnog kruga stvara manje topline, ima optimalan intenzitet svjetlosti i izdržljive performanse. SPECIFIČNO ZA VOZILO. Ovo naknadno tržište, kabelski svežanj za vozilo-prikolicu dizajniran je za odabrane godine Mazde 2 hatchback, Mazde 5 i Mazde CX 9. STANDARDNI KONEKTOR. Ovo priključno 4-plosnato ožičenje prikolice može se koristiti za spajanje stražnjih svjetala prikolice, signalnih svjetala kočnica i pokazivača smjera. 4-smjerno ožičenje svjetla za prikolicu popularno je na raznim prikolicama, dodajući raznovrsne mogućnosti vuče za vaše vozilo. LAGANO ZA UGRADNJU. Nema rezanja! Bez spajanja! Ovaj komplet kabelskog snopa prikolice uključuje se u postojeću tvorničku instalaciju na vašem vozilu i oprema ga standardnim, stražnjim 4-pinskim priključkom za ožičenje prikolice za priključivanje i vuču prikolice.

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.7 4.7 out of 5 stars 240 ratings 4.7 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	9 x 6 x 3 inches
Item model number	‎56016
Item Weight	1.77 Pounds
Item Weight	‎1.77 pounds
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎56016
Material	Rubber
Model	‎Custom Wiring
OEM Part Number	‎56016
Product Dimensions	‎9 x 6 x 3 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s^*

Vaša ocjena

Scritto da: Amazon Customer

Everything you need

The package included everything that we needed to install the equipment.

Scritto da: sam

Worked perfect for our 2015 CX-9

Our 2015 Mazda CX-9 had a Mazda trailer control/harness/module installed that had partially failed (right trailer blinkers no longer worked). I installed this Curt module in its place, and everything works perfectly now, for much cheaper than of we were to purchase a Mazda OEM harness.

Scritto da: GCV

Worth it..

Routing the wire from battery to the back of the vehicle maybe complicated but the rest is a breeze...wish it came with tester so that you don't have to get one..it's a. Awesome buy..

Scritto da: Amazon Customer

Comes with everything to install

I've never done this before and wired my car and about an hour. The instructions it comes with are confusing so I just looked up a U-Haul how to video. This thing comes with everything you need to install zip ties silicone and also actors for the power chords. The only thing you really need is to have a screwdriver and a pair of pliers to crimp the electrical wire but together. My trailer lights all works and I have a 17 foot vehicle and ran this out the hitch with about a foot and a half. The cord is nice and long. Works as expected. The only thing is the sticky pad it comes with two mount the inverter box with is not sticky at all you'll need to have your own double-sided tape if you want to use that way of mounting. I just use a zip-tie on both sides of the converter box to Anchor

Scritto da: Matt

Works great for 2011 CX-9

The connectors on this unit were a perfect match for my 2011 CX-9. The only slicing required was cutting into the 12V supply line for the passenger side accessory outlet, which is a much better option than running a wire all the way to the engine compartment to the battery. Took a while to install this, because of how many panels had to come off. In the CX-9, the side panels are held on by about 10 cargo hooks bolted through it. Remove these with a 10mm socket. Remove the trunk and skid plate along the bottom of the hatch. I installed the unit on the driver side, used a self tapping sheet metal screw for the ground, and ran the battery cable wire to the passenger side 12V outlet. The double sided tape is useless, either buy some 3M outdoor tape or I just tucked it into a spot where it stayed put (there is a small area stuffed with foam, I kind of jammed it partway in so it didn't bounce around.) For the 12V outlet, cut the hot wire and splice in the new cable using one of the supplied butt connectors. Make sure you pull the fuse under the hood to avoid shorting. It is listed as "RR outlet." You will need another butt connector, they give you 2, but you need 3 to use the included fuse. Do not go without the fuse, if the trailer wiring shorts out it could damage your cars electronics. I left the flat trailer connector in the area of the jack, so once I put it all back together, I just open the jack compartment and pull out the cable. This keeps it clean and dry until it is needed. Just run it out to the trailer and close the door on it, it will not damage the wire. I have used this method on 3 cars over the years (all hatchbacks) and have never had a problem.

Scritto da: J. Louie

Worked perfectly for our CX-9, but there were a few issues to note

Installed this on a Mazda CX-9 Sport FWD. The instructions were pretty lacking, but I'd already done my research on how to remove the inside panels to get access to all the necessary connectors. Instead of running the power wire all the way to the battery, power is always running to the rear 12V outlet so I tapped into that instead by soldering the short "fuse" wire in the hot wire going into the 12V. After getting everything connected and routed, I did find that my voltmeter was reporting voltage to the 4-flat leads even without the key on or the engine running (this was the not the case with the factory-installed wiring harness tested for comparison). It must be an extremely low draw, because when tested on a trailer in pitch black, there wasn't any glow from the lights until the car lights were turned on like normal. I just wanted to mention that for other folks to be aware of. Pros: Easy to install. Took about two hours with lots of double-checking and testing. Worked perfectly when hooked up to my trailer. Cons: Instructions were lacking, so I'd watch the install videos on eTrailer beforehand if want to brush up on the process. The leaking voltage caused some unnecessary heartburn as well.

Scritto da: overboostvisuals

Easy to install and provide clean factory-look

Absolutely perfect, super clean plug and play install. Worth it vs splicing into tail light harness. All wires are long enough to make it where they need to be, and on my wife’s 2012 CX-9 I was able to almost entirely hide the power cable by running it along the drivers-side under the car where there are a lot of trays that the wire can be tucked in, and the green cable to reach the passenger side easily hides too. A little extra time and you can make it look like the car came from the factory ready for towing.

Scritto da: Dennis P. Dalton

Fits well.

Easy to connect and works as advertised.

Scritto da: Geo

Great product

I have used these before. This was put in a Mazda 5 van and works perfectly! It was no more difficult or easy to install than any others.

Scritto da: P Remps

Worked perfectly!

Nice easy install. Everything fit perfect. It says to run a power cable under the car to the battery, I tapped into the power on the 12v accessory outlet in the back hatch. Made it even easer. Very happy.

Scritto da: Sarah

Fits 2012 Mazda 5. Easy to install

Easy install on my 2012 Mazda 5 GS. Everything plugs in easily. The hardest part of the install was running the wire to the battery under my carpet. Comes with everything you need to install other then basic tools.

Scritto da: Randy

Great quality. Easy instructions

Works perfectly on my 2008 Mazda CX-9. Great quality. Easy instructions. Video on Youtube is very helpful.