The Hillman Group 59742 Stezaljka za crijevo s oprugom, 1 inč, paket od 12 komada, siva

Name: The Hillman Group 59742 Stezaljka za crijevo s oprugom, 1 inč, paket od 12 komada, siva
Brand: The Hillman Group
SKU: 0008236890273
Price: 30.86 EUR
Availability: InStock

Brand:The Hillman Group

3.1/5

€
30.86

OPIS PROIZVODA Ove stezaljke za crijeva pouzdane su i jednostavne za postavljanje. Imaju veću duktilnost, otpornost na udarce i otpornost na trošenje za određenu tvrdoću. Održava stalnu napetost kako bi se spriječilo curenje kada se crijeva šire i skupljaju tijekom toplinskog ciklusa. OD PROIZVOĐAČA Ove stezaljke za crijeva pouzdane su i jednostavne za montažu. Imaju veću duktilnost, otpornost na udarce i otpornost na trošenje za određenu tvrdoću. Održava konstantnu napetost kako bi se spriječilo curenje kada se crijeva šire i skupljaju tijekom toplinskog ciklusa.

Iznos

Dodaj u košaricu Kupi sada

EAN: 0008236890273

Kategorije Alati i poboljšanje doma, Električni i ručni alati, Dijelovi i pribor za električne alate, Pribor za usisivače i sakupljače prašine, Stezaljke za crijeva,

Visoka otpornost na koroziju. Veća duktilnost i otpornost na udarce za određenu tvrdoću. Uključene varijante imaju promjer od 3/8 do 1. Dijelovi imaju opružni dizajn. Dijelovi se lako postavljaju i mogu se brzo ukloniti ako je potrebno.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	The Hillman Group
Color	Gray
Color	‎Gray
Customer Reviews	4.0 4.0 out of 5 stars 75 ratings 4.0 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	3.5 x 2.4 x 1.6 inches
Item model number	‎59742
Item Package Quantity	‎1
Item Weight	‎2.89 ounces
Manufacturer	‎The Hillman Group
Part Number	‎59742
Product Dimensions	‎3.5 x 2.4 x 1.6 inches
Size	‎1 Inch
Style	Modern
Style	‎Modern

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s^*

Vaša ocjena

Scritto da: Luke

Works well - no leaks so far!

These seem to be working well for the heater hoses on my 1995 bronco. They're holding on tight and there are no leaks so far. My only complaint is that they should list the hose sizes these will work for. I had to take a guess and hope for the best. These turned out to be just a little smaller than I needed and I had to fight to get them seated properly, but now that they're on there they certainly aren't going anywhere!

Scritto da: James

Great clamps stop my hose leak!

Worked perfectly and had the OEM look.

Scritto da: LLSB

Not as shown on the web page.

What the web page shown are 2mm think spring steel which I need. The one sent with the same part number are black are thin light duty 1mm think spring steel. Looks like McMaster is the only place I found where you can get the correct heavy duty 2mm type.

Scritto da: Amazon Customer

Keeps the specified diameter and pressure.

These are high quality. After the first expansion, you can tell a cheapie will not hold or keep the size you wanted. Just take one and expand it and let it go. The Hillman will come back more and repeatedly. For your car, your peace of mind on the road, use a good one on that hose or pipe.

Scritto da: DIYGuy

These are superior clamps in that they provide constant tension

These are superior clamps in that they provide constant tension. I have had a radiator hose come off on the highway with the worm gear type of clamp. They do NOT provide constant tension, which is important as the hoses age and compress under the pressure of the clamp. I am replacing corroded clamps and the worm gear types on my vehicles with these.

Scritto da: Jacki

These are the best spring clamps available

These are NOT the cheap clamps that you buy at Autozone. These things are legit and better than screw on type, bc they never let up. I used 2 boxes of these to do a trunk tank cooler for a supercharged car and not a single one has leaked. These are the best ones around.

Scritto da: Moniqua

Misleading size

I was looking for a spring clamp with a 1" closed inside diameter. These are 7/8" diameter closed, making it very difficult to get on the PCV hose I was trying to clamp.

Scritto da: California Reader

Not good for 3/4" heater Hose

I was barely able to install this clamp onto the bottom T fitting. The clamp is opened up quite a bit at this point. Maybe that's normal. The clamp below, which I still can't find online for this larger size needed, fits great. I could not get this clamp to fit in that location as the fitting in the block has a nice bulb to it that you need to open the clamp up to get over. The bottom clamp is fitting onto the 3/4" hose right into an LS1 block out of a 98 Trans Am. I gave up trying ton install this onto the other fitting, ended up putting an old worm gear clamp onto it. I'd return these, but it was such a hassle to install, getting it off is not something I'm interest in doing. Maybe this would be good for 5/8" hose, but I already have clamps for it. Quality of the material is good, these just aren't working out for me.