SharkBite 1/2 x 3/8 inča kompresijski ravni zaporni ventil, četvrtina okretaja, gurnite za spajanje mesingane vodovodne armature, PEX cijev, bakar, CPVC, PE-RT, HDPE, 23037-0000LF

Name: SharkBite 1/2 x 3/8 inča kompresijski ravni zaporni ventil, četvrtina okretaja, gurnite za spajanje mesingane vodovodne armature, PEX cijev, bakar, CPVC, PE-RT, HDPE, 23037-0000LF
Brand: SharkBite
SKU: 0784497951099
Price: 41.31 EUR
Availability: InStock

Brand:SharkBite

3.8/5

€
41.31

OPIS PROIZVODA Pojednostavite svoje vodovodne projekte pomoću ravnog zapornog ventila od mesinga SharkBite. Mehanizam push-to-connect ovog zapornog ventila omogućuje vam kontrolu i zatvaranje protoka vode prema instalacijama ili uređajima radi održavanja i popravka. Ova mjedena vodovodna armatura idealna je za rad u uskim prostorima i može se ugraditi u mokre vodove. Ovi ravni zaporni ventili s pritiskom na spajanje jednostavni su za ugradnju, kompatibilni su s PEX, CPVC, PE-RT, SDR-9 HDPE i bakrenim cijevima i ne zahtijevaju nikakve posebne alate, ljepilo, presovanje ili lemljenje za ugradnju. Ovi potisni kompresijski ventili imaju elegantan kromirani atraktivan izgled i prikladni su za komercijalne popravke ili projekte poboljšanja doma. Svi SharkBite ventili, kopče, spojevi i adapteri proizvedeni su i testirani u SAD-u. OD PROIZVOĐAČA SharkBite 23037-0000LF ravni graničnik 1/2-inča X 3/8-inča bez kompresije

Iznos

Dodaj u košaricu Kupi sada

EAN: 0784497951099

Kategorije Alati i poboljšanje doma, Grubi vodovod, Dijelovi slavine, Ventili za slavine,

IZRAĐENO U SAD-u: Svi SharkBite ventili, spojnice, spojevi i adapteri proizvedeni su i testirani u SAD-u. PREFERIRAN OD STRANE PROFESIONALCA: SharkBite alati i priključci zadovoljavaju iste visoke standarde za komercijalne i stambene vodoinstalaterske primjene, kombinirajući izdržljivost i jednostavnost upotrebe; imaju elegantnu kromiranu završnicu za atraktivan izgled. LAGANO ZA UGRADNJU: Ovaj inovativni zaporni ventil ima 1/2-inčni dovod koji se može spojiti i mjedeni kuglasti ventil s četvrtinom okretaja za brz i jednostavan rad; nisu potrebni posebni alati, presovanje, ljepilo ili lemljenje; može se ugraditi u mokre vodove. SVESTRANA: mesingani potisni ravni graničnici dobro rade s PEX, CPVC, PE-RT, SDR-9 HDPE i bakrenim cijevima. SHARKBITE BRASS PUSH STRAIGHT STOP: Mjedeni potisni ravni zaporni ventili koriste se za kontrolu i zatvaranje protoka vode do svjetala ili uređaja za održavanje i popravak; idealan za rad u uskim prostorima; uklonite pomoću stezaljke za odspajanje ili kliješta za odspajanje.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	SharkBite
Brand	‎SharkBite
Certification	‎Nsf, Ansi, Ipc
Color	Chrome
Color	‎Chrome
Country of Origin	‎China
Customer Reviews	4.8 4.8 out of 5 stars 1,200 ratings 4.8 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Exterior Finish	Brass
Exterior Finish	‎Brass
Included Components	‎Compression Straight Stop Valve
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	6 x 4 x 6 inches
Item Dimensions LxWxH	‎6 x 4 x 6 inches
Item model number	‎23037-0000LF
Item Package Quantity	‎1
Item Weight	0.05 Pounds
Item Weight	‎0.05 Pounds
Item Weight	‎0.8 ounces
Manufacturer	‎Cash Acme
Material	Brass
Material	‎Brass
Measurement System	‎Inch
Number Of Pieces	1
Number Of Pieces	‎1
Part Number	‎23037-0000LF
Pattern	‎Valve
Product Dimensions	‎6 x 4 x 6 inches
Size	1/2" x 3/8"
Size	‎1/2" x 3/8"
Style	‎Straight
Warranty Description	‎Limited 2 Year

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s^*

Vaša ocjena

Scritto da: Jodi

I Love These

I'm 67 y/o women who does her own basic plumbing and I have put these on the toilet and faucet lines of both my bathrooms. I will eventually put them on my kitchen faucet lines as well. Just a note: I have polybutylene piping through out my house (not great but didn't know when I bought it). Snake bite shutoffs will not include these pipe types as okay to use on. I believe this is because they don't make them anymore and banned them from being used in houses in the mid 90's. They worked fine on all mine.

Scritto da: kiwis_n_ct

Old faucet soldered to pipes

The old owners soldered the faucet to the pipes. I cut them off, installed the Snakebites and then the faucet in about an hour. Saved myself a few hundred in plumber costs. A feel confident I can now replace other valves that have corroded in the house

Scritto da: Jocko

Easy!

It took longer to remove the contents from under the cabinet than it did to cut/clean and install the valves!

Scritto da: Karen Kent

It seems that it would be pretty hard to make these leak on their slip fitting ...

It seems that it would be pretty hard to make these leak on their slip fitting (push-fit) even if you were trying. As usual the compression fitting leaked at first which is just a reality of installing compression fittings and with continued diligence the leaked was stopped. It's worth noting that water can get trapped in the fitting between the ferrule and the nut. This will give the false perception that its still leaking and keep tightening it. I would just tighten it and then wait an hour to check for leaks. Finally like many of these fittings this has the infamous Prop 65 warning. Just to confuse things lead stabilized PVC can be considered "lead-free" in some cases which is what bothered me at first. I'm not to alarmed by this but for the sake of thoroughness I wanted to see what this could indicate. Giving Sharkbite the benefit of the doubt NSF-61 indicates less than 0.25 percent lead and in drinking water applications an extremely low leachate. Getting NSF-14 which just falls back to NSF-61 indicates "lead-free" which means it has less than 0.25 percent lead. There is also no particular reason they'd need to use any lead in this product but who knows. Sulfuric acid which is generally used in processing before application of chromium is also considered under Prop 65 so that could explain the warning. But I've seen this warning on plain brass products as well and on ones that are not shiny which is what sulfuric acid does. So its likely something else as well. Lastly there may be chemicals that fall under Prop 65 in the plastic couplings however this would not be exposed to the water so it really poses no risk there except that Prop 65 applies anyway. My main concern is lead and it would be nice to have approvals based on the complete absence of and or use of lead in manufacturing. In any case I'm quite impressed with this valve.

Scritto da: Macdavids

Great, Easy, Affordable

Works great, is easy to install even for a woman. highly recommended.

Scritto da: Trevor

So easy to use, can't beat the convience and simplicity!

We had a water leak at a T in our manufactured home and it was on the old PB plastic piping. Since that is piping discontinued and I have no crimping tools anyway I researched the Sharkbite fittings due to their claim that you need no tools, just measure the depth and slide them on. I was a bit skeptical at first but I was in a bind so purchased two PB to Pex fittings, a Pex T and an Pex Shut off. I watched a youtube video before attempting the repairs just to get an idea what I needed to do. Cutting out the old pipe T, then installing the two PB to Pex fittings with a section between that included the new Pex T, and then the new shut from the T took me 15 minutes. I popped on the water and no leaks, worked perfectly. These things are the real deal and will save you a ton of time and hassle! I can sweat copper pipe as well but for future repairs I may just use these fittings, no sense in wasting my time when I can measure, cut, push to install and then you're done.

Scritto da: DonMi

Just works

Not much to say, easy to connect and it works. Don’t even think twice. If you need it, get it.

Scritto da: Stefano

great if you can't solder a pipe

I had a shut off valve that was stuck in the partly closed (or open if you perfer) position, it was old and needed to be replaced as the volume of water coming out of the kitchen faucet was not very much. I was unable to heat the pipe up to break the solder and would not have enough room to solder anything else on so I ended up cutting the pipe just below the old shut off and using this push valve. No leaks, no solder, no problems and now I have great water pressure. All in all I am please with the ease of use and the quality of this product.