SharkBite 1/2 inča x 3/4 inča MHT Kutni ventil za perilicu rublja, Push to Connect mesingani vodovodni priključak, PEX cijev, bakar, CPVC, PE-RT, HDPE, 25560LF

Brand:SharkBite

3.8/5

40.58

Pojednostavite svoje vodovodne projekte s SharkBite mesinganim ventilom za perilicu rublja. Ovaj ravni ventil perilice rublja može se koristiti u instalacijama perilice rublja bez ispusne kutije perilice rublja. Montiran na klin ili gredu, ovaj vodovodni ventil ima 1/2-inčni ulaz za spajanje pritiskom koji dobro funkcionira s PEX, CPVC, PE-RT, SDR-9 HDPE i bakrenim cijevima. Ova mjedena vodovodna armatura idealna je za rad u uskim prostorima i može se ugraditi u mokre vodove. Ovi ventili za perilice rublja koji se mogu spojiti imaju ventil za vodu pod kutom od četvrtine okreta s nosačima za montiranje i ne zahtijevaju nikakve posebne alate, ljepilo, stezanje ili lemljenje za brzu i jednostavnu montažu. Izrađen od DZR kovanog mesinga, ovaj SharkBite ventil za perilicu rublja prikladan je za komercijalne popravke, projekte poboljšanja doma i podzemne i izazidne primjene bez pristupnih ploča. Svi SharkBite ventili, kopče, spojevi i adapteri proizvedeni su i testirani u SAD-u.

IZRAĐENO U SAD-u: Svi SharkBite ventili, spojnice, spojevi i adapteri proizvedeni su i testirani u SAD-u. PREFERIRAN OD STRANE PROFESIONALCA: SharkBite alati i priključci zadovoljavaju iste visoke standarde za komercijalne i stambene vodoinstalaterske primjene, kombinirajući izdržljivost i jednostavnost upotrebe; prikladan za podzemne i primjene iza zida bez pristupnih ploča. LAGANO ZA UGRADNJU: Inovativni dizajn SharkBite mesinganog potisnog ventila za perilicu rublja omogućuje brzu i jednostavnu ugradnju, bez potrebe za alatima, stezanjem, ljepilom ili lemljenjem; može se ugraditi u mokre vodove; uklonite pomoću stezaljke za odspajanje ili kliješta za odspajanje. SVESTRAN: Ovaj vodovodni ventil može se montirati na klin ili gredu i ima 1/2-inčni priključak za spajanje koji dobro funkcionira s PEX, CPVC, PE-RT, SDR-9 HDPE i bakrenim cijevima; ima ventil za vodu pod kutom od četvrtine okreta s montažnim nosačima. SHARKBITE BRASS PUSH VENTIL ZA PERILICU: Ravni ventil za perilicu rublja SharkBite može se koristiti u instalacijama perilice rublja bez izlazne kutije perilice rublja; idealan za rad u skučenim prostorima.
Batteries Included? ‎No
Batteries Required? ‎No
Brand SharkBite
Brand ‎SharkBite
Color ‎Copper
Country of Origin ‎USA
Customer Reviews 4.8 4.8 out of 5 stars 1,163 ratings 4.8 out of 5 stars
Exterior Finish Copper,Brass
Exterior Finish ‎Copper,Brass
Finish ‎Brass
Included Components ‎Washing Machine Angle Valve
Inlet Connection Size 0.5 Inches
Inlet Connection Size ‎0.5 Inches
Inlet Connection Type Cross Linked Polyethylene
Inlet Connection Type ‎Cross Linked Polyethylene
Installation Method ‎Can be installed in wet lines.
Item Dimensions LxWxH 4.38 x 3.74 x 7 inches
Item Dimensions LxWxH ‎4.38 x 3.74 x 7 inches
Item model number ‎25560LF
Item Package Quantity ‎1
Item Weight ‎4.2 ounces
Manufacturer ‎Cash Acme
Material Brass
Material ‎Brass
Measurement System ‎inch
Outlet Connection Size 0.75 Inches
Outlet Connection Size ‎0.75 Inches
Outlet Connection Type PEX
Outlet Connection Type ‎PEX
Part Number ‎25560LF
Product Dimensions ‎4.38 x 3.74 x 7 inches
Style ‎Angle
Usage ‎Washing machine installations.
Valve Type Angle
Valve Type ‎Angle
Warranty Description ‎EMW4883161

3.8

13 Review
5 Star
85
4 Star
9
3 Star
4
2 Star
1
1 Star
1

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s*

Scritto da: donnagrump
Great fast Quality replacement
Great fast Quality replacement
Scritto da: randolph v.
Easy
Had old leaky washer shut off relacd with these easy
Scritto da: Luka
easy to install, even with first-timer anxiety!
we just moved into an older house. the washer hookups were badly corroded, but since we just moved, we didn't have a ton of extra money to hire someone to fix them right away. watched some tutorials online, came across a video of someone installing sharkbite valves, and bought them along with a pipe cutter and a tool to smooth out the burrs. i was kind of skeptical of this being so easy, because it seemed too good to be true, but it worked out great and i was done in less than half an hour! a couple tips i saw from the videos i watched before installing: - keep the valves in the bags they come in until you're ready to put them on the pipe. if debris gets into the valve before it's installed, it might not seal properly, or could cause issues down the line. - make sure you smooth out the burrs (sharp edges left on the pipe where you cut)! otherwise the burrs can cut the seal and ruin it. for people who have experience with this kind of thing that sounds like a no-brainer, but this was my first time doing anything like this, and i'm glad it was stressed a lot to me.
Scritto da: Justin
Works Perfect
Put them in for my washer. Works great
Scritto da: The Southern Fried Yankee
Additional spigot
I wanted a way to have a functional spigot on our back porch. So I ordered this and another valve to create a 3 season waterline running under the porch that can be drained and shut off. This worked great! Easy to install, easy to use, and looks great. Whole project took 1/2 a day from prep through clean up.
Scritto da: Judy W. Blalock
Excellent product works great
Price
Scritto da: Scooter
Great buy
Great buy
Scritto da: MatthewGB
Eazy peazy
I bought 2 of these to replace old school compression ones that must of been installed so long ago that when I tried to close one the handle snapped. The project itself was pretty worrying as both were locked on so tight I had no choice other than to saw them off, the pipes were in pretty bad shape and took a while to buff them as smooth as possible. Getting these on tight was another concern, they attached a little too easy too be true and expected a flood when switching the water on. But they were water tight and I didn’t have to do any fine tuning to get the compression drip free. Now I have to admit they don’t feel as safe as the traditional ones on the market and I’m not about to give them a good pull to find out. Other than that though they’re amazing and definitely something that Id like having in my tool box for emergencies
Scritto da: Bob S.
Excellent product
My first experience with a SharkBite product. Easy to install, great seal and requires no soldering. I like it and it's a Great product.
Scritto da: Amazon Customer
Taps
Works great for my laundry taps.
Scritto da: Barry
SMALL
Small and easy to use
Scritto da: frazzx
Brilliant
Super easy install press on your done no leaks no welding high quality worth the money
Scritto da: Dave
does the job
hooked up a washing machine with it works fine

Povezani proizvodi

Otkrijte našu međunarodnu mrežu

Šaljemo u 28 zemalja, preko 200.000 proizvoda. Budite u toku, pretplatite se na newsletter.

Array