ScotchBlue originalna višeslojna slikarska traka, 2,83 inča x 60 jardi, 2090, 1 rola

Brand:Scotch Painter's Tape

3.8/5

45.80

ScotchBlue Original Multi-Surface Painter's Tape nudi svestrano rješenje za zaštitu vaših površina tako da možete oživjeti svoje kreativne vizije. Dizajnirana za glatke ili blage teksture zidova, obloga, podnih ploča, pločica i stakla, ova ljepljiva traka može ostati do 14 dana i lako se uklanja bez ostavljanja ljepljivog ostatka. Otporna na UV zrake, sunčevu svjetlost i vlagu, ScotchBlue Painters Tape je idealna traka za unutarnje i vanjske prostore, koja vam omogućuje da osvojite zapanjujuće projekte bojanja na više površina. Izrađena od 45% obnovljivih izvora s jezgrom od 70% otpada nakon upotrebe, ova traka bez otapala izrađena je na mjestu bez odlagališta certificiranom za upravljanje energijom kako bi vam pružila održivi proizvod za bojanje. Za upotrebu, nanesite traku za slikanje čvrsto na površinu i ostavite 30 do 60 minuta prije bojanja. Pričekajte da se boja osuši prije uklanjanja. Najbolji poslovi bojanja počinju sa Scotch Painter Tape. S punim rasponom ljepljivih rješenja, ScotchBlue Painter’s Tape pruža pouzdanje u vrhunske rezultate kako biste posao obavili ispravno i učinkovito prvi put.

Nema dostupnih jedinica
KAKO KORISTITI: Pustite da se čvrsto nanesena traka stegne 30 do 60 minuta prije nego što počnete bojati, a kada je boja suha na dodir, polako podignite traku kako biste je uklonili pod kutom od 45 stupnjeva. ODRŽIVOST: Traka za boju bez otapala izrađena od 45% obnovljivih izvora s jezgrom od 70% otpada nakon upotrebe. PRIMJENA U UNUTARNJIM I VANJSKIM PROMETIMA: Otporan je na UV zrake, sunčevu svjetlost i vlagu pa je možete koristiti kao traku za unutarnju ili vanjsku upotrebu. OSVOJITE VEĆINU POVRŠINA: Posebno dizajnirana plava traka za glatke ili blage teksture zidova, obloga, podnih ploča, pločica i stakla. TRAKA ZA LOKIRANJE BEZ OŠTEĆENJA: Ljepljiva traka može ostati na površinama do 14 dana i lako se uklanja bez ostavljanja ljepljivog ostatka. SPREMAN. SET. PAINT!: 1 rola ScotchBlue originalne slikarske trake širine 2,83 inča, rješenje za više površina za pripremu bojanja vašeg životnog ili radnog okruženja.
Brand Scotch Painter's Tape
Color Blue
Country of Origin USA
Department Unisex-Adult
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item model number 2090-72A
Manufacturer 3M
Material Blend
Number of Items 1
Product Dimensions 2.83 x 4.69 x 4.69 inches; 1 Pounds
Special Feature No Residue

3.8

8 Review
5 Star
83
4 Star
11
3 Star
4
2 Star
1
1 Star
1

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s*

Scritto da: Jon
Not Mr Handy ... But this got the best of "ME CLUMSEY"
It was really hard "for me and don't know what I did awong" just getting the roll to start from packaging. Like how wide it is
Scritto da: Shay Chicci
3D Printer Awesome
I use it on my 3D print bed to make removal of prints easier. Prints perfectly on top of tape, removal is a bit easier ( still not perfect ) but tape comes off bed clean.
Scritto da: Javid Akhundov
One of the best
The product arrived without any physical damage or cosmetic imperfection. The usage of this tape was mostly for modifying the sound signature of a mechanical keyboard. Overall, it is good, does the job and does not leave any adhesive on keyboard's PCB. After a while, I used in to sort of stitch the teared parts of a pleather office chair. To my surprise, not only does it hold the pleather together, but it also does not get peeled off so easily. For three months straight, it still stays on the chair and looks, as if it was applied yesterday. The only things, which started to peel off, are tiny sharp corners, but the tape does not continue to peel off from them. Before I purchased this tape, I used other types of cheap masking tapes for all sorts of work. They always failed me in holding stuff, staying in place for a long period, and they always left adhesive one way or another. I will probably start looking into other products from 3M Company from now on.
Scritto da: Justin
Ole George sucks with tape!
Doing some painting and getting those crisp lines and protecting areas from drips. Good tape had no issues using it, but had some paint come off in areas. Could just be the paint or previous painters work. But as it was a DIY, and I'm not a professional, I couldn't tell you. Either way, it worked for what I needed and good quality.
Scritto da: Rolidnot
Best painters tape on the market
I use this "blue tape" all the time for all sorts of projects. Most recently, I used this tape on a set of "cat steps" I milled from 12/4 white pine, topped with low pile carpet, installed as "floating shelves" on the wall and painted black - on a white wall. I taped the wall off, used Sherwin Williams satin black stock paint and painted 6 steps for my furry buddies to climb on on my front room. I let the black paint dry, pulled it off and the paint job was perfect and walls were all still white. I didn't remove the wall paint underneath the tape, I didn't get any black paint on the wall and the tape went on and came off with ease. I've tried generic versions of this tape and they pretty much fail one way or another so I stick with the Scotch brand (pun intended). Hope that helps!
Scritto da: David
works well
Did not realize there was that much difference in quality among brands of masking tape. This one is fine. Other off-brands I have recently used have easily torn when trying to remove a strip of tape from the roll. Some others have been fine and also worked well, but this is the standard quality that others are measured by. And they came so quickly.
Scritto da: E. Story
Great for crafting
I love this tape! It stays where it's supposed to, and then it peels off without leaving any sticky residue, like the cream-colored masking tape I was using before this.
Scritto da: MLB
Best choice for 3D printing!
ScotchBlue Painter's Tape, Multi-Use, 2.83-Inch by 60-Yard is a must for any 3D printing enthusiast. Anyone who is familiar with 3D printing knows that trouble with prints sticking to the bed is the number one problem with 3D printing. There’s nothing more frustrating that watching your printer chug along for a few hours when, all of a sudden….pop! Your print releases from the bed and starts dragging across the bed. This wastes time as well as filament. So frustrating! The number one remedy for this issue is painter’s tape! I’ve tried no-name brands and they’re not as good as Scotch. The wide, almost three inch width of this tape allows me to cover the entire bed of my Printrbot Simple Metal with only 2 rows of tape. When I first tried painter’s tape, I chose the standard with – maybe an inch or so wide. What a pain that was to apply! Layers overlapped, making my bed uneven. Without a doubt, the wide tape is the way to go!

Povezani proizvodi

hot

Otkrijte našu međunarodnu mrežu

Šaljemo u 28 zemalja, preko 200.000 proizvoda. Budite u toku, pretplatite se na newsletter.

Array