Redcat Racing HUK-1P Volcano EPX komplet za skokove, ljubičasta

Brand:Redcat Racing

3/5

142.10

Redcat Racing dio # HUK-1P VOLCANO EPX komplet za skokove, ljubičasta. Kompatibilan sa sljedećim vozilima Redcat Racing: VOLCANO EPX/EPX pro. Redcat Racing se nalazi u Sjedinjenim Američkim Državama i ima puno osoblje za podršku koje će vam pomoći s vašim Redcat Racing proizvodom. Za ispravnu ugradnju i sklapanje pogledajte priručnik za svoje vozilo. Od 2005. Crvena mačka je vaš izvor brzog - pristupačnog - zabavnog! Uključeni dijelovi: 02131p zglob upravljača (2) 08055 prednja donja ruka (2) 08056 stražnja donja ruka (2) 06048 zatezna kuka W/ STROJNO OBRAĐENI aluminijski krajevi šipke (4) 02130p stražnji nosač glavčine (2) 102057 servo saver set 02132p prednja C glavčina (2) 3x14 Bhs (14) 3x12 Bhs (2) 3x3 grubi vijak (2)

Kompatibilan sa sljedećim vozilima Redcat Racing: volcano EPX/EPX Pro. Za informacije o rješavanju problema i jamstvu obratite se stručnjaku korisničke službe Redcat Racing na 602-454-6445 ili e-poštom na amazonsupport@redcatracing.Com. Molimo pogledajte korisnički priručnik kako biste bili sigurni da je ovo ispravan dio za vaš model. Koristite samo originalne Redcat Racing zamjenske dijelove kako biste postigli najbolje performanse sa svojim Redcat Racing vozilima. Originalni Redcat Racing zamjenski dio # HUK-1P.
Customer Reviews 4.0 4.0 out of 5 stars 40 ratings 4.0 out of 5 stars
Item model number HUK-1P
Item Weight 10.3 ounces
Manufacturer Redcat Racing
Manufacturer recommended age 14 years and up
Product Dimensions 14 x 8.5 x 1 inches

3

8 Review
5 Star
56
4 Star
13
3 Star
18
2 Star
5
1 Star
9

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s*

Scritto da: George
Don’t waste your money
Save your money the turn buckles are sloppy I Put the plastic ones back in The front knuckles have a lot of sloppy Not worth the price
Scritto da: BiffSoQuick
Need instructions. Schematics view from Redcat racing website is not enough.
If this is your first "hop up" or upgrade kit be ready for some trial and error. Instructions are not detailed. A tool list would have been helpful as well. I was lucky enough to have the the little tinny hex sizes required (1.5) for the shocks removal. Also need a hex size 2 for the rear wheel hub retaining pin. Speaking of the shocks, I lost several of the shocks rider bolts (tinny hex pins) on my first drive after installing this kit. The shocks pins work themselves out while driving as they are very loose (see pic). I recommend some type of locktight or thread locker (probably medium or blue) on these pins.
Scritto da: Rabidbat racing
A great project. Needs alot of set up!
Note: This requires some skill to set everything up. It is not just a simple swap out of componants. Once assembled, camber, toe in, shock position, etc all need to be tuned. You will need to get wheel bearings, C hub bushings as well. I used a good silicone grease for all. Must have Thread Locker 242 (removable). Now I'm itching for the shock towers, control arm carriers, and chassis plate! Weee! (I set the rear arms parallel, with a little angle on the front, 2 degrees neg camber all around, and 3 degrees toe in. 50 wt in the shocks.)
Scritto da: BP Hawk
No instructions
I bought this hop up kit recently. Quality of the aluminum is good although I had one item that did not have treads in it and it requires threads. So I had to leave the old factory part on instead. But my big complaint is that it says at the bottom of the package "for installation instructions go to ...". Well guess what the website is nonexistent. So I went to redcoats website and opened the schematics for the rc car to help guide me and the schematics online are hard to see (blurry) and it's of a slightly different car. The parts in the hop up package are not labeled and it took a lot of time to carefully ID and determine what part goes where. My suggestion if you plan on purchasing is study the parts carefully or you will find yourself putting stuff on and taking it off again.
Scritto da: Binoj Daniel
No instructions or markers on the parts to know which side is right
I wish there were some markers or directions on how to install them. Put them backwards had to take out the entire setup and redo.
Scritto da: Bronson
Good quality
Everything fit perfectly. Very pleased with the quality of the parts. Highly recommended.
Scritto da: Travis Stagg
Five Stars
Product was perfect. Works great, everything they advertised, and shipping was fast. Thank you
Scritto da: kim marshello
Great upgrade
Fit perfectly

Povezani proizvodi

hot
ARRMA ploča šasije, ARA320514
3.7/5

€ 118.27

ARRMA ploča šasije, ARA320514
3.7/5

€ 118.27

hot
HobbyZone set plovaka: Super Cub LP
3.3/5

€ 94.78

HobbyZone set plovaka: Super Cub LP
3.3/5

€ 94.78

Otkrijte našu međunarodnu mrežu

Šaljemo u 28 zemalja, preko 200.000 proizvoda. Budite u toku, pretplatite se na newsletter.

Array