Rain Bird TC/1PKS rezač cijevi za navodnjavanje kap po kap, reže sve veličine cijevi za kap po kap do 3/4” kombinirani rezač cijevi - 1/4 i 1/2

Name: Rain Bird TC/1PKS rezač cijevi za navodnjavanje kap po kap, reže sve veličine cijevi za kap po kap do 3/4” kombinirani rezač cijevi - 1/4 i 1/2
Brand: Rain Bird
SKU: 0077985002374
Price: 46.93 EUR
Availability: InStock

Brand:Rain Bird

3.4/5

€
46.93

OPIS PROIZVODA Rain Bird TC/1PKS Rezač cijevi za navodnjavanje kap po kap, reže sve veličine cijevi za kap po kap do 3/4”. Ovaj visokokvalitetni rezač cijevi lako reže sve veličine cijevi za kapanje kako bi zadovoljio jedinstvene potrebe vašeg sustava prskalica i navodnjavanja. Pruža čiste rezove bez nazubljenih rubova ili gnječenja cijevi. Oštrica od nehrđajućeg čelika oštra kao britva reže brzo i čisto za brže instalacije. Jedinstveni dizajn nudi dva otvora različitih veličina (jedan za cijevi od 1/2 do 3/4 i jedan za cijevi od 1/4) koji pružaju veću snagu pa je potrebno manje sile za rezanje bilo koje cijevi! Lagana, ali čvrsta konstrukcija. Ergonomska ručka služi i kao alat za kopanje rovova za zakopavanje cijevi u malč ili rastresito tlo. Izvrstan za rezanje LPDE cijevi, vinilnih cijevi, cijevi za navodnjavanje kap po kap, crijeva za natapanje, prozirnih vinilnih cijevi (CVT) i drugih mekanih cijevi vanjskog promjera do 0,750”. Vrlo vidljiva ljubičasta boja omogućuje lako uočavanje alata u travi, zemlji, kori itd. Praktična plastična vrećica sadrži (1) rezač cijevi. Zamjenska oštrica može se kupiti zasebno: PPC-200XBLD. Rain Bird “Inteligentna upotreba vode” OD PROIZVOĐAČA Rain Bird Corporation privatna je tvrtka osnovana 1933. godine tijekom poljoprivrednog procvata u Kaliforniji. Prepoznati smo kao broj 1 proizvođač i pružatelj proizvoda i usluga za navodnjavanje u svijetu. S prodajnim uredima diljem svijeta; nudimo više od 4000 proizvoda za navodnjavanje koji štede vodu u više od 130 zemalja. Od samog početka, Rain Bird proizvodi i nudi najširi asortiman visokokvalitetnih proizvoda za navodnjavanje u industriji za: farme, golf terene, sportske arene, komercijalne objekte i domove. U proteklih 80 godina Rain Bird je dobio više od 450 patenata diljem svijeta. Uključujući prvu za navodnjavanje 1935. za našu originalnu udarnu prskalicu (američki patent br. 1,997,901) koja je revolucionirala poljoprivrednu proizvodnju hrane i otvorila novu eru u navodnjavanju diljem svijeta. Godine 1990. ovu originalnu udarnu prskalicu Američko društvo poljoprivrednih inženjera proglasilo je povijesnim spomenikom. Naši proizvodi pokrivaju sve aspekte navodnjavanja… tajmere/kontrolore, skočne rotirajuće prskalice, skočne raspršivače s raspršivačima, mlaznice za prskalice, ventile za navodnjavanje, navodnjavanje kap po kap, drenažu i još mnogo toga. Svi su ovi proizvodi odabrani i ugrađeni diljem svijeta u najveće i najprestižnije projekte za navodnjavanje stambenih, komercijalnih, poljoprivrednih i golf terena. Rain Bird je predan The Intelligent Use of Water™ s našom predanošću koja se proteže izvan proizvoda na obrazovanje, obuku i usluge za industriju i zajednicu. Naše naslijeđe je dizajn i proizvodnja samo proizvoda najveće vrijednosti i kvalitete. Zahvalni smo što smo primili brojne nagrade od mnogih naših cijenjenih partnera. Rain Bird “Inteligentno korištenje vode

Iznos

Dodaj u košaricu Kupi sada

EAN: 0077985002374

Kategorije Dvorište, travnjak i vrt, Vrtlarstvo i njega travnjaka, Oprema za zalijevanje, Oprema za automatsko navodnjavanje, Cijev za navodnjavanje,

Koristi se za brzu montažu. Ergonomska ručka. Reže cijevi za kapanje. Oštrica od nehrđajućeg čelika. Vrlo vidljiva ljubičasta boja omogućuje da se alat lako vidi u travi, zemlji, kori, malču itd. Omogućuje bržu i lakšu instalaciju sustava kapanja. Sadrži udubljene bunare koji zahtijevaju manje poluge i sile. Oštrica od nehrđajućeg čelika oštra kao britva i ergonomska ručka. Radi na svim markama cijevi za navodnjavanje kap po kap od 1/4 do 3/4. Visokokvalitetni lagani alat za rezanje; pravi čiste rezove bez nazubljenih rubova ili gnječenja cijevi.

Country of Origin	Canada
Customer Reviews	4.4 4.4 out of 5 stars 1,442 ratings 4.4 out of 5 stars
Is Discontinued By Manufacturer	No
Item model number	TC/1PKS
Item Weight	1.6 ounces
Manufacturer	Rain Bird
Product Dimensions	20.5 x 20.5 x 4.25 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s^*

Vaša ocjena

Scritto da: Sandra

made my job easier

it made my job easier

Scritto da: Angel Douglas

Very small so dont lose it, worked good for what It was needed for

I only worry about losing this, but i put it on a key ring and will be fine. Worked like a charm to make smaller to larger holes in seconds. I needed this exact tool for the job.

Scritto da: JS

Slow shipping.

Works great

Scritto da: Bàká Hään

Useful tool

We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this tool in order to push the barbed end of the emitters into the 1/2 in tubing. + Good price. + Very easy to use. Snap the colored side of the emitter into the middle of this tool. Then use the leverage of the tool to push the black barbed end of the emitter into the hole you punched into the 1/2 in tubing. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.

Scritto da: Bàká Hään

Useful tool

We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this took in order to connect the 1/2 in tubing with the Tee and elbow fittings. + Good price. + Very easy to use. Use this to flare the ends of the 1/2 in tubing. Then snap the fitting into the tool and use it to push the tubing onto the barbed end of the Tee or Elbow. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.

Scritto da: Flamsteed

I needed his

I had been using a heat gun to soften the tubing end before inserting the fittings This tool works and makes the job so much easier…and I don’t have to run an extension cord.

Scritto da: JNK

Blade works great, hole punch not so much

The blade part works great for cutting irrigation hose (I've used it on both 1/2 and 1/4 inch to equal effect), but that's not really hard as any scissors would do the same. I mostly got this to have the cutting and hole punching on one tool, but unfortunately, I have yet to have the hole punch work well. Perhaps I'm not doing it right, but if so, then how this should be used must be very convoluted.

Scritto da: Saeng Fio Chao

Great handy tool

With all others tool, I find this is the best one

Scritto da: Ed

Don't forget the tool!

I ordered a RainBird drip irrigation system, part by part, to water my vegetable garden (with large raised beds). One of the challenges we face is that we move the vegetables from bed to bed each year, and so it used to take a lot of time to adjust and rebuild our old system as the plants changed places. With my new RainBird system I was able to set up a single long 1/4" drip tubing (with 6" hole spacing) for each bed so that it can be laid out quickly around all the plants, the closer the spacing the more water etc.. The backbone of the system is a 1/2" main line where I used a bunch of T's and L's to smoothly run the main pipe under the soil, popping up a branch over the edge of each raised bed. I used 1/4" barbed coupling fittings (get the purple RainBird tool for these!) to connect the 1/4" drip tubing to the 1/2" main line branches. All connections went together really well, the pieces are consistent, I have not found any leaks, and best of all I was able to install on my own in under 2 hours, including burying the main line pipe! I am very satisfied, and would strongly recommend this product.

Scritto da: Annette Dreger

Very easy to use

Worked as excepted--makes nice straight cuts and proper sized holes for the barbs!!

Scritto da: Amazon Customer

retour imposible

J'ai voulu le retourner car il venait déjà avec le kit rainbird mais le vendeur il ne voulait aucun retour de cette item

Scritto da: DP Kindle Customer

It works!!

Love!! It works giving you more leverage to insert the tiny barbed connector and emitters!! Saves my fingers, well worth the price!!

Scritto da: rferraro

Product description is misleading

I bought this tool to use with 1/4 barbed fittings as is indicated in the amazon.ca description. The barbed fitting end DOES NOT fit into the hole so that you can insert the other barbed end into the hose. I'd like to return it bit this item is not returnable for some reason. Useless for me....