POWERTEC 71609-P4 Komplet raskrižja s T-tračnicama, 4 kompleta

Brand:POWERTEC

4/5

64.98

Predstavljamo komplet raskrižja T-traka tvrtke POWERTEC. Ovaj komplet raskrižja od 4 dijela omogućuje vam instalaciju višestrukih konfiguracija T-traka i optimiziranje vaših šablona i učvršćenja T-traka. Nakon sastavljanja, ovaj praktični kit oblikuje dvije okomite tračnice (presjecišta), dajući vam mogućnost da pomaknete šablone i učvršćenja u gotovo bilo kojem smjeru. Svaka tračnica (širine 3/4”) ima kut od 90 stupnjeva na jednom kraju koji točno pristaje sa svoje tri podudarne komponente kako bi formirali savršeno raskrižje. Izrađen je od precizno obrađenog anodiziranog aluminija otpornog na koroziju za optimalnu izdržljivost, strojnu obradu i preciznost. To je savršen alat kada trebate sagraditi ili izraditi stolove, šablone i pribor. Opremljen s unaprijed izbušenim rupama, ovaj će se predmet jednostavno postaviti, brzo prilagoditi i još lakše koristiti. Sada se možete pomicati i konfigurirati svoje t-track komponente, kao što su stezaljke, držači, graničnici i više, u gotovo svim smjerovima kako bi odgovarali vašim projektnim zahtjevima. Uz dašak mašte, vještine i kreativnosti, mogućnosti su neograničene s ovaj osnovni komplet. Specifikacije pojedinačnih gusjenica * Dužina: 3 inča * Širina: ¾ inča * Dubina: 3/8 inčaPOWERTEC je vodeći proizvođač visokokvalitetnih alata i pribora za obradu drva, strojeva i asortimana OEM zamjenskih dijelova. Posvećeni smo premašivanju očekivanja, dok u industriju donosimo najnovije inovacije, tehnologiju i razvoj proizvoda.

LAGANO ZA UGRADNJU: Tračnice su dizajnirane za postavljanje u ravnini sa stolom i imaju unaprijed izbušene rupe za montažu. VRHUNSKA IZGRADNJA: Izrađen od anodiziranog aluminija, ovaj komplet raskrižja t kolosijeka dizajniran je za dugotrajnu izdržljivost, istovremeno pružajući optimalnu otpornost na habanje i prirodnu zaštitu od korozije. KOMPATIBILNOST: Dizajniran za rad s POWERTEC Universal T-Track i sadrži 1/4” t-vijke, 5/16” t-vijke i 1/4” šesterokutne vijke za učinkovito proširenje korisnosti vašeg sklopa radnog stola. FUNKCIJA: Omogućuje instalaciju t-track sklopa u različitim konfiguracijama, pomicanjem šablona i učvršćenja u različitim smjerovima. UKLJUČUJE: (4) T-Tracks komplet raskrižja za obradu drveta, koji sadrži ukupno 16 komada T-track segmenata.
Batteries Required? ‎No
Country of Origin ‎Taiwan
Customer Reviews 4.9 4.9 out of 5 stars 39 ratings 4.9 out of 5 stars
Included Components
Item model number ‎71609-P4
Item Package Quantity ‎1
Item Weight ‎10.4 ounces
Manufacturer ‎POWERTEC
Material ‎Aluminum
Package Dimensions ‎7.48 x 6.89 x 2.01 inches
Part Number ‎71609-P4

4

6 Review
5 Star
93
4 Star
7
3 Star
0
2 Star
0
1 Star
0

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s*

Scritto da: Laird
Time saver and cut perfectly
Makes installing T-track much easier and saves a ton of time! You could always miter all the pieces yourself but the time it would take is way more valuable than the few bucks it costs to purchase these perfectly cut intersections. I am still finishing up the install of the powertec universal T-track but I have been wanting to do this for a while. Being able to secure your workpiece is obviously critical and I find myself having to spend way too much time trying to clamp or secure via whatever means available. This system should enable me to dog down workpieces in almost no time at all. I have a slab flattening jig that rolls over the table also so the track system should have endless value. Update… I forgot to mention that you should remember to take into consideration the impact on measuring if you are going to use precut intersections. The ones from Powertec (which I would highly recommend without any compensation or gift etc to say) are a total of six additional inches in each direction. That means you will have much shorter lengths of track than you might expect. e.g. the track between T’s in one direction on my setup is only 7 inches because the precut intersections add a total of 6 more. This means I have 13 inches between the center of the track . Love it!
Scritto da: Doug Kelly
Almost Perfect and Less Money
Well, nothing is really perfect. However, the Powertec T-track intersection kit comes mighty close. On the recommendations of several other YouTube wood workers, I bought these, the 4 foot and 2 foot tracks and hold downs from Powertec. I was very impressed with the fit and finish quality, but noticed some slight color differences in the track sections (not all the same shade of blue. A very minor annoyance. Great product at a great price!
Scritto da: Robert Johnson
Works nicely, a little finicky
Based on the pictures I was expecting a single cross piece. But, what it really is is four individual pieces with 45° points. When you put those four pieces together, you get the cross. That means using a square to get everything aligned, which isn't a problem, just a little more finicky than I expected.
Scritto da: fvg
Use a 3/8” key stock to maintain alignment when installing segments. Glue and screw in place.
A lot of work but has been a worth while endeavor.
Scritto da: burnsy
Exceptional and economical.
Much better value than Rockler and accepts larger screw.
Scritto da: Spoon
Good addition to a Table
I decided to make my own portable work surface with t-tracks and dog holes and decided on these for use with the track assembly. Used in conjunction with PowerTec straight t-track to assemble a 2 x 4 foot table that I can toss on a couple of saw horses when I need some extra play area. These were all excellent quality and the same size, making is easy to square off everything. No screws came with them, so you'll need the appropriate screws for your table thickness. A good choice and less than similar items from many other vendors.

Povezani proizvodi

hot
Woodstock D4116 šablona za tiple
3.4/5

€ 109.25

Woodstock D4116 šablona za tiple
3.4/5

€ 109.25

Otkrijte našu međunarodnu mrežu

Šaljemo u 28 zemalja, preko 200.000 proizvoda. Budite u toku, pretplatite se na newsletter.

Array