POWERTEC 70189 Y-priključak sakupljača prašine

Brand:POWERTEC

3.6/5

52.35

Predstavljamo Y-priključak za sakupljanje prašine tvrtke POWERTEC. Ovaj pravi spoj tipa "Y" djeluje kao razdjelnik za skupljanje prašine i posebno je dizajniran da vam pomogne smanjiti s priključka od 6" (ili glavnog voda) na 4 inča. Nasuprot kraju od 6 inča, ovaj konusni razdjelnik ima dvostruke vodove crijeva od 4” - isporučujući višenamjenski alat koji povećava radni tijek, dok učinkovito prilagođava višestruke dovode crijeva. Bez obzira koristite li ovaj konektor sa svojim vakuumskim sustavima ili prijenosnim radioničkim strojevima, osmišljen je da poboljša protok zraka i učinkovitost vašeg sustava. Također je napravljen za pružanje sigurne i pouzdane veze s vašim priključcima. Vrhunska kvaliteta Naš 6x4x4 Y-priključak izrađen je od crne, visokokvalitetne ABS plastike. Ovaj materijal je napravljen za teške primjene i nudi izdržljivost s netoksičnim karakteristikama. Njegova ekološki prihvatljiva konstrukcija čini ga idealnim za unutarnje i vanjske projekte, a obično ga koriste hobisti i profesionalni drvoprerađivači diljem svijeta. POWERTEC je vodeći proizvođač visokokvalitetnih alata i dodataka za obradu drva, strojeva i asortimana OEM zamjenskih dijelova. Posvećeni smo premašivanju očekivanja, dok u industriju donosimo najnovije inovacije, tehnologiju i razvoj proizvoda.

SPECIFIKACIJE: nominalni kraj od 6 inča ima vanjski promjer od 6-23/64 inča i unutarnji promjer od 6 inča. Oba nominalna kraja od 4 inča imaju vanjski promjer od 3-61/64 inča. i 3-23/32-inčni unutarnji promjer – svakako provjerite sučelje vaših dijelova za kompatibilnost veličine. Imajte na umu da ovo nije dizajnirano za rad s rasporedom 40 ili drugim rasporedima PVC cijevi. PROFESIONALNA IZRADA: Izrađen od visokokvalitetnog ABS plastičnog materijala dizajniranog za čvrstoću i izdržljivost – Može izdržati prašinu, krhotine i druge abrazive koji obično uzrokuju trošenje i habanje. ZNAČAJKE: Otvor od 6” je ženski priključak i radi s cijevima od 6” OD ili drugim muškim otvorima. Dvostruki OD otvori od 4” za smještaj crijeva za skupljanje prašine, cijevi i alata poput stolnih pila, spojnica, blanjalica i brusilica. FUNKCIJA: Ovaj konektor s tri rupe omogućuje vam smanjenje priključka od 6” (ili glavne linije) na grane od 4 inča. Može se koristiti kao zamjena za sakupljače prašine, poput POWERTEC DC1512 ili jedinica slične veličine. UKLJUČUJE: (1) Priključak sustava za skupljanje prašine tipa Y.
Batteries Included? ‎No
Batteries Required? ‎No
Brand POWERTEC
Brand ‎POWERTEC
Color Black
Color ‎Black
Connector Type Reducer
Connector Type ‎Reducer
Country of Origin ‎Taiwan
Customer Reviews 4.5 4.5 out of 5 stars 239 ratings 4.5 out of 5 stars
Exterior Finish ABS
Exterior Finish ‎ABS
Included Components ‎Fitting
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 7 x 6.2 x 10 inches
Item Dimensions LxWxH ‎7 x 6.2 x 10 inches
Item model number ‎70189
Item Package Quantity ‎1
Item Weight ‎13.6 ounces
Manufacturer ‎POWERTEC
Material Acrylonitrile Butadiene Styrene
Material ‎Acrylonitrile Butadiene Styrene
Measurement System ‎Inch
Number Of Pieces 1
Number Of Pieces ‎1
Part Number ‎70189
Product Dimensions ‎7 x 6.2 x 10 inches
Size 6 x 4 x 4"
Size ‎6 x 4 x 4"
Style ‎6" to 4" fitting

3.6

9 Review
5 Star
75
4 Star
13
3 Star
7
2 Star
3
1 Star
2

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s*

Scritto da: Anna
Useful product, but a bit too narrow
This splitter was perfect for my niche need to connect 3 fan outlets into 1 roof vent. At first I used box store fittings which was clunky and expensive. I threw my contraption out and used this splitter instead. But I fitted one ending to a 4" ABS pipe from the box store. The fit wasn't great - I had to use several thick layers of cement to enlarge this splitter. Other people mention that it splits down the middle to two halves. I can see how this can happen, the two halves are melted together. So I reinforced it with ABS cement.
Scritto da: Julien
Perfect solid hardware that is holding up well
Perfect solid hardware that is holding up well
Scritto da: TrailTrackers
This does work... With some work
You need "volume" to make this fitting function correctly. Notice my system goes from 8" to 6" to this fitting. Also note that I have this fitting inserted into a 6" Tee; roughly 1 1/2" penetration. Now then, to make this fitting work... I used my 5" random orbital sander with 60 grit paper and EVENLY sanded around the outside of the 6" end until it would go into the Tee. When I reached 1 1/2" penetration I switched to 120 grit to finish it off. I could have glued this into place, but I chose to use duct tape instead because at some point I'll be moving into a larger shop. edit: I should mention 2 more things. The time it took to sand this fitting to size was only 15 mins; nothing to speak of imho. Also, I liked the way this turned out so much I ordered another one, which I just got today. I will have that one installed tomorrow. ;-))
Scritto da: Sam H.
Thinner than I expected, but works
Does the job
Scritto da: Strat Man
Another tool in the battle against dust.
If you're trying to use this wye fitting with schedule 40 PVC pipe (which is *not* the same size as DWV pipe), you may want to consider using a 6" flexible coupling - it's a piece of cake. I used this Fernco unit (https://www.amazon.com/gp/product/B001AU6S8C/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1) and no additional fiddling was needed for nice tight fit. As a bonus, it is a simple matter to adjust the orientation, if required.
Scritto da: nolan shinn
Great value
Did just what I needed at a fraction of the price of a comparable product from the original manufacturer
Scritto da: Atlanta customer
Dimensions are not accurate
The 4” ends are not actually 4”. They are smaller. This is important to me because smaller openings will cause pressure drop and reduced suction.
Scritto da: Hank W
Not a proper fit for my PSI dust collector
This y-fitting was a replacement for a broken fitting on my single stage PSI dust collector. The ID of the 6" portion was oversized, so I had to use black tape on the collector for a snug leak-free fit. Don't know if that is intentionally done by PowerTec or a flaw in manufacturing... but buyer beware.
Scritto da: dd
Great value
Using this "Y" for running two 4 inch bathroom fans to vent out one 6 inch wall vent.

Povezani proizvodi

Otkrijte našu međunarodnu mrežu

Šaljemo u 28 zemalja, preko 200.000 proizvoda. Budite u toku, pretplatite se na newsletter.

Array