POWERTEC 110090 4 x 24 inčne brusne trake

Brand:POWERTEC

3.4/5

47.30

Predstavljamo POWERTEC brusnu traku od 4” x 24” granulacije od 80 aluminijeva oksida. Ovo vrhunsko pakiranje od 10 komada osmišljeno je kako bi vam pružilo isplativ set dugotrajnih brusnih traka visokih performansi. Izrađeni s otvorenim slojem zrna aluminijeva oksida (A/O), djeluju kao višenamjenski alat koji se najbolje koristi za brušenje drva, oblikovanje, skidanje i davanje glatke završne obrade mnogim vašim primjenama u obradi drva. Osim toga, ovi remeni rade iznimno dobro s lakim i obojenim metalima, miješanjem zavarenih spojeva, stakloplastike, plastike i gume. Svaka traka krasi se X-težinom odjevenom podlogom i posjeduje jaku vezu smola na smoli s dobro izrađenim šavovima za dugotrajne rezultate. Bilo da ste profesionalac ili tip DIY, ove teške brusne trake kompatibilne su s mnogim vašim go-to brusilice, uključujući: Craftsman, Makita, Skil, Wen, Ridgid, Porter-Cable, Black+Decker, Bosch, Triton, Hitachi, Metabo i više! Specifikacije: Veličina abrazivne trake: 4 inča x 24 inča veličina zrna : 80Materijal: Premium Open Coat Aluminium Oxide (A/O) GrainBacking: Jaka podloga od tkanine "X" težine Spoj: Jaka konstrukcija spoja Paket: 10 komada Vodič za odabir zrna:• 40 – 60 Zrnatost: Jako brušenje i skidanje• 80 – 180 Zrnatost: Uklanjanje Sitne nesavršenosti• 240 – 400 zrnatosti: pruža super finu glatku završnu obraduPOWERTEC je profesionalni proizvođač visokokvalitetnih strojeva za obradu drva, pribora za obradu drva i širokog asortimana OEM zamjenskih dijelova. Posvećeni smo premašivanju očekivanja, dok u industriju donosimo najbolje inovacije, tehnologije i razvoj proizvoda.

ZRUČNOST: Dostupan u širokom rasponu uniformne granulacije - 40/ 60/ 80 / 100/ 120/ 150/ 180/ 240/ 320/ 400 granulacije. IZRADA: Ove brusne trake 4”x24” imaju materijal otporan na toplinu i vlagu, a dizajnirane su sa stručno izrađenim šavovima koji neće pucati pod pritiskom. PREMIUM GRADE: Izrađen s našom superiornom X-Weight obloženom podlogom, otvorenim slojem zrna od aluminijskog oksida i impresivnom vezom smola na smoli koja osigurava dugotrajnu izvedbu. UPORABA: Radi s nizom strojeva za brušenje s trakom i primjenama – pruža alat za skidanje i brušenje za teške uvjete rada za drvo, aluminij, stakloplastike, gumu, plastiku i obojene metale.
Amperage Capacity 11 Amps
Amperage Capacity ‎11 Amps
Batteries Included? ‎No
Batteries Required? ‎No
Brand POWERTEC
Brand ‎POWERTEC
Country of Origin ‎China
Customer Reviews 4.3 4.3 out of 5 stars 740 ratings 4.3 out of 5 stars
Grit Number 80
Grit Number ‎80
Grit Type Medium
Grit Type ‎Medium
Included Components ‎POWERTEC 110090 4 x 24" Sanding Belts | 80 Grit Aluminum Oxide Sanding Belt | Premium Sandpaper For Portable Belt Sander – 10 Pack
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 10 x 4 x 4 inches
Item Dimensions LxWxH ‎10 x 4 x 4 inches
Item model number ‎110090
Item Package Quantity ‎1
Item Weight ‎1.5 Pounds
Manufacturer ‎POWERTEC
Material ‎Aluminium
Part Number ‎110090
Product Dimensions ‎10 x 4 x 4 inches
Size ‎80 Grit

3.4

13 Review
5 Star
70
4 Star
14
3 Star
3
2 Star
2
1 Star
11

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s*

Scritto da: Randy Browning
Can’t speak to longevity, but they work.
I’ve used one of the 40 grit belts, so I’ll generalize in this review. I purchased a Bauer 10amp 4x24 belt sander from Harbor, and these fit perfect. I’m working on a sap filled 16” pine disk so the medium causes the belt to gum up (it would not matter what belt you use), but it cleans up well by using a brass wire brush on the belt while running the sander. The finer the grit the more it will clog, but again that’s with any belt. The paper track material is thick and does not show any signs of separation, and the 4” width helps it track straight. The cost per belt is less than half of any big box belt, and only 70% of the offerings at Harbor, which were thin and no where near the accurate grit density.
Scritto da: Amazon Customer
Update after I use
Received on time. Have not used yet but seem to be well made. Will update after I use
Scritto da: jon fredricks
good service
good quality and price
Scritto da: D Lee
Belts Break!!
Poor seams!! Every belt used (4 in all) broke after several minutes of deck sanding with a Makita sander. On the 4th try I had to disassemble the sander to remove the broken belt. Upon closer inspection it is obvious that the seam tape is failing. See photo. Clearly this is a faulty design that has not been adequately tested by the manufacturer. My remaining belts will be trashed.
Scritto da: Warren Y.
solid sandpaper
I used this sandpaper to sand down uneven transition height between sheathings in a mobile home subfloor. The sandpaper is strong and i only used up 3 of these for the entire mobile home. One thing i learned is that if you're looking to take down surface quickly on plywood... go with a 60 or 36 grit paper. 80 is still too fine to take down uneven surface quickly. You'll be there all day although at the end of the day, the job actually gets done.
Scritto da: fishing buddy
Look good.
They look, were shipped promptly. Priced right. I just have been too busy to try them out. Want to work on half log benches stained and coated with epoxy. Used for the first time yesterday, work great.
Scritto da: Tandy Norris
They eat wood as they should.
They work great on my belt sander.
Scritto da: andres cardenas
Very week glue
I sand around 70-100 cabinet doors a day, and these sanding belts only lasted 7-13 doors per belt. I would imagine they would be amazing once you break in the belt, but you won't get to that point.
Scritto da: Vic
Works very well. Did the job I needed it to.
Have a small woodworking shop in my garage my wife and I make different things out of wood. The sandpaper came in very handy works well fits good on the machine. Longevity is OK. Value is good. Did what I needed it to do and I’m still using them.
Scritto da: Hyrule Cofee
Inconstant quality
I bought 4 packs of those sand belt. 2/4 of them was ok and does a great job. The 2 others broke after 5 minutes of sanding. The blue junction between ends is weak for them. So you get a chance of a good or really bad belt.
Scritto da: n
Don't buy these Sanding belts
They work for a while, but fall apart (catastrophically) within a few minutes of use. Other brands do not, so its not the fault of the sander. The belts start to come apart and tend to jam the sander. Do NOT use these. I tried to return an unopened package, but was (sadly) 2 days late and the return window is closed. I will never use Powertec products again.
Scritto da: Jorge Adrian Fernandez Campos
Muy mala calidad
Que lastima de la calidad del producto, llego en tiempo y el precio muy accesible pero lamentablemente al utilizar las bandas se despegaron de inmediato, no duro ni tres minutos de uso y se despegaba, utilice otra para ver si era un defecto en esa unidad, pero al parecer el pegamento no tiene la adherencia necesaria y se despega, lo cual puede ocasionar un accidente a quien está manipulando la lijadora
Scritto da: Chris R.
Garbage, never had so many belts break so quickly.
These belts are garbage and do not last more then 10 mins before snapping. I even went out and bought a quality belt to test my Sander before posting this. It worked perfect for 30 mins, put another on of these back in and snapped in less then 10 mins.

Povezani proizvodi

hot
POWERTEC 110460 3 x 21 brusne trake
3.5/5

€ 42.84

POWERTEC 110460 3 x 21 brusne trake
3.5/5

€ 42.84

Otkrijte našu međunarodnu mrežu

Šaljemo u 28 zemalja, preko 200.000 proizvoda. Budite u toku, pretplatite se na newsletter.

Array