Pony 8510BP držač za ormarić, pakiranje od 2 komada

Name: Pony 8510BP držač za ormarić, pakiranje od 2 komada
Brand: Pony Jorgensen
SKU: 0044295851008
Price: 74.10 EUR
Availability: InStock

Brand:Pony Jorgensen

3.7/5

€
74.10

OPIS PROIZVODA Kandže za ormarić Jedinstveni alat koji kombinira više koraka ugradnje ormarića s prednjim okvirom u jedan jednostavan postupak. Koristeći ovu stezaljku, stupovi okvira za lice mogu se zategnuti, poravnati, prethodno izbušiti i pričvrstiti - dok stezaljka ostaje u svom izvornom položaju; Nije potrebno uklanjanje ili ponovno postavljanje stezaljke. Ugradnja profesionalne kvalitete postiže se u djeliću vremena u usporedbi s upotrebom konvencionalnijih stezaljki. Osim toga, stezne površine i ploča za poravnanje opremljene su zaštitnim gumenim jastučićima za ublažavanje i zaštitu ormarića od oštećenja tijekom instalacije. Ugrađuje dva stupića od 1-1/2 do 2 širine i do 1-1/2 debljine (svaki) s kapacitetom 4 otvora. Prodaje se u paru. AMAZON.COM Montaža ormara može biti teška, ali ovaj set stezaljki čini je više nego podnošljivom. Jedinstveni dizajn je kao još jedan par ruku koje hvataju dok poravnavate i zatežete stupove, bušite i pričvršćujete, a stezaljke ostaju postavljene tijekom cijelog procesa. Sviđa nam se profesionalna kvaliteta: lagane, ali robusne aluminijske hvataljke i ploče za poravnanje, zaštitne gumene jastučiće koji neće pokvariti vaš rad, pocinčane vijke promjera 1/2 inča, hladno vučene čelične vijke s glatkim Acme navojima. Plastične ručke imaju čak i utore za odličan zahvat. Ove stezaljke će raditi sa stupovima širine od 1-1/2 do 2 inča i do impresivnih 1-1/2 inča debljine. Mislimo da je vrijedan cijene ako radite sami, bilo da ste profesionalac ili kućni majstor.--Kris Jensen-Van Heste OD PROIZVOĐAČA Pony 8510 Cabinet Claw je jedinstven alat koji kombinira više koraka ugradnje ormarića s okvirom za lice u jedan jednostavan proces. Koristeći ovu stezaljku, stupovi okvira za lice mogu se zategnuti, poravnati, prethodno izbušiti i pričvrstiti - dok stezaljka ostaje u svom izvornom položaju; nije potrebno uklanjanje ili ponovno postavljanje stezaljke. Profesionalna, kvalitetna instalacija postiže se u djeliću vremena u usporedbi s upotrebom konvencionalnijih stezaljki. Osim toga, stezne površine i ploča za poravnanje opremljene su zaštitnim jastučićima za ublažavanje i zaštitu ormarića od oštećenja tijekom instalacije. Ugrađuje dva stupića od 1-1/2 inča do 2 inča širine i do 1-1/2 inča debljine (svaki) s kapacitetom otvaranja od 4 inča. Čeljusti i ploča za poravnanje izrađeni su od aluminija. Vijci su od pocinčanog čelika promjera 1/2 inča s posebnim glatko izrezanim Acme navojima. Ručke su izrađene od izdržljive plastike. Jastučići su samoljepljivi koji štite ormariće. Vidi više

Iznos

Dodaj u košaricu Kupi sada

EAN: 0044295851008

Kategorije Alati i poboljšanje doma, Električni i ručni alati, Workholding, Ručni alati, Stezaljke, C-stezaljke,

Ugrađuje dva stupića od 1-1/2 inča do 2 inča širine i do 1-1/2 inča debljine (svaki) s kapacitetom otvaranja od 4 inča. Zaštitne podloge štite ormare od oštećenja tijekom postavljanja. Profesionalna, kvalitetna instalacija postiže se u djeliću vremena u usporedbi s upotrebom konvencionalnijih stezaljki. Nosači okvira za lice mogu se zategnuti, poravnati, prethodno izbušiti i pričvrstiti dok stezaljka ostaje u svom izvornom položaju. Jedinstveni alat koji kombinira više koraka ugradnje ormara s okvirom za lice u jedan jednostavan proces. Noge okvira za lice mogu se zategnuti, poravnati, unaprijed izbušiti i pričvrstiti dok stezaljka ostaje u svom izvornom položaju. Jednostavan za postavljanje i vrlo izdržljiv. Zaštitne podloge štite ormariće od oštećenja tijekom postavljanja. Specifikacije stezaljke: radi na stupovima od 1-1/2 inča do 2 inča; Širina čeljusti: 2 inča; Dubina grla: 1-1/2 inča; Minimalni otvor: 2 inča, maksimalni kapacitet otvaranja: 4-7/16 inča. Pandža za ormarić jedinstven je alat koji kombinira više koraka ugradnje ormarića s prednjim okvirom u jedan jednostavan postupak.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Pony Jorgensen
Country of Origin	‎China
Customer Reviews	4.7 4.7 out of 5 stars 2,232 ratings 4.7 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	9.5 x 5.25 x 7.75 inches
Item model number	‎8510
Item Package Quantity	‎1
Item Weight	2.71 Pounds
Item Weight	‎2.71 pounds
Manufacturer	‎Adjustable Clamp Co
Material	Aluminum, Zinc Plated
Material	‎Aluminum, Zinc Plated
Part Number	‎8510BP
Power Source	‎Hand Powered
Product Dimensions	‎9.5 x 5.25 x 7.75 inches
Size	‎Pack of 2
Style	Claw
Style	‎Claw

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s^*

Vaša ocjena

Scritto da: JD

A just have!!

Don't look any further, get these!! Easy to use and a must have for joining cabinets together. Easy slot for predrilling and it flips aside so you can screw in the screw. Make sure you use the right screws!!

Scritto da: Amazon Customer

Perfect tool for cabinet installation.

This tool makes lining up the faceframes and pre-drilling for the screws much easier.

Scritto da: Amazon Customer

Work very well for aliening Cabnets.

These tools are made of steel, very sturdy with padded plates, so you don’t damage the cabinets. we’ve used them on several jobs. they align the cabinets perfectly, and hold them in place while you drill your hole and put the screws in to secure them. 5 star product

Scritto da: C. Davis

Definitely helped with our cabinet install

These cabinet claws defintely made installing most of the cabinets and securing them together easier. I had several cabinets with fillers, and it didn't do well with those, or when I needed to clamp the corner cabinets, so I still had to depend on my regular clamps, too. I also had the issue of my drill bits being too large to fit in the guide for the pilot holes because the base of the bits I had were made to fit in the drill. So, I had to get new drill bits to use with these to make the pilot holes. So, it definitely saved time and made it easy to line up and hold the cabinets in place, but if I had to do it again, I'd just use my regular clamps.

Scritto da: Mad Hatter

Good, but know it's limitations.

Easy to use, holds very well and does not mar the cabinet face (but I still tape them just in case). Two considerations before buying. One is that it doesn't work when joining two cabinets that both have narrow stile widths. The clamps have a limited closing width. The other is related to the drill/pilot mechanism. It's very handy but limits the countersink bit you can use. Outside of these observations, this is a good tool to have in your collection.

Scritto da: Vespasian

Know what these are for before buying them.

These clamps are made to install cabinets with face frames, they are not for installing filler boards to cabinets like what one of the other reviewers has in a photograph. He doesn't know how to use these clamps. Don't fault the tool if you don't know what you are doing and don't know how to use the tool. Why did I only give 3 stars? These are a great clamp that will help a serious installer but the new company making them seems to have serious supply issues and are not keeping the supply and quality up with not only this clamp but other pony clamps which is a shame but offshore a product to a new company in China like what happened to the old sears brand tools that once were great and now we get junk versions of an original. The new version works, just not as good as the originals. I'm about ready to give up on pony, whoever is making them now REALLY needs to get their act together and produce better quality and be more reliable with their supply.

Scritto da: John P. Wrycza

multi cabinet install MUST HAVE

simple to use, drill bit guide with flip cover to insert screws - huge time saver & a great value

Scritto da: Richard kale

Perfect stiles

Love these clamps. The window is great for being able to drill the hole in the area that the clamp would normally take up, having the guide to drill straight is an added bonus. Other clamps you’d have to drill above or below it. If you’re install cabinets with the door hinges still on some time you’d have to secure it further from the top or bottom then you’d like, but these you can right where you put the clamp. Smooth closing and opening, and the face clamp works great for getting the cabinet faces perfectly lined up as you secure them. Must have for kitchen installers. Some times wish they would make a smaller version for when you are adding on a filler piece, if it’s only a 1/2 or 1 inch pieces the clamp doesn’t close enough for it to work.

Scritto da: Fred Salazar

Great Helpers

These clamps are perfect for installation of framed cabinets, not so much for frameless, very good seller highly recommended

Scritto da: Jon

Awesome

I'm just going to write this review on behalf of my husband LOL he is a Carpenter and he's been using these quite a bit lately he seems to really like them they work really well considering we are redoing our kitchen and we've been using them the whole time and he did mention that he likes that it has the soft padding stuff on the inside which also cushions the clamp but doesn't loosen the grip or cause any damage

Scritto da: tomas

Facilita la instalación de gabinetes

Son muy útiles al instalar gabinetes