0
0

Ukupno:€ 0.00

Vidi kolicaProvjeri
LoginRegister
0

Ukupno:€ 0.00

Vidi kolicaProvjeri
LoginRegister

PC Products PC-Fast-N EZ fleksibilna epoksidna ljepljiva pasta, 14 ml u dvostrukoj šprici, prozirna 61411

Brand:PC Products

3.2/5

€
31.21

Stvrdnjava se prozirno kako bi se stopio s lijepljenim materijalom. Omogućuje vrijeme rada od 8 do 10 minuta i vrijeme potpunog stvrdnjavanja od 12 do 24 sata (na 75 stupnjeva F). Raspon kontinuirane radne temperature od -20 do +200 stupnjeva F. Ne sadrži hlapljiva otapala i neće se skupiti nakon stvrdnjavanja. Vodootporna veza; dovoljno čvrst da se može bušiti, urezivati, puniti ili brusiti nakon stvrdnjavanja. Ljepilo opće namjene; koristiti za lijepljenje drva, metala, stakloplastike, keramike, stakla i mnogih tvrdih plastika. Ne koristiti na polietilenu, vinilu, akrilu i nekim vrstama plastike.

Nema dostupnih jedinica

EAN: 0054983061411

Kategorije Industrijski i znanstveni, Ljepila, brtvila i maziva, Epoksi, Epoksidna ljepila za pločice,

Stvrdnjava se prozirno kako bi se stopio s lijepljenim materijalom. Omogućuje vrijeme rada od 8 do 10 minuta i vrijeme potpunog stvrdnjavanja od 12 do 24 sata (na 75 stupnjeva F). Raspon kontinuirane radne temperature od -20 do +200 stupnjeva F. Ne sadrži hlapljiva otapala i neće se skupiti nakon stvrdnjavanja. Vodootporna veza; dovoljno čvrst da se može bušiti, urezivati, puniti ili brusiti nakon stvrdnjavanja. Ljepilo opće namjene; koristiti za lijepljenje drva, metala, stakloplastike, keramike, stakla i mnogih tvrdih plastika. Ne koristiti na polietilenu, vinilu, akrilu i nekim vrstama plastike.
Brand PC Products
Color Translucent
Compatible Material Wood, Fiberglass, Glass, Ceramic, Plastic
Item Form Paste
Material Paste

3.2

7 Review
5 Star
63
4 Star
10
3 Star
14
2 Star
8
1 Star
6

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s*

Scritto da: Huevos Rancheros
can save you a ton of money. works well if you know what you are doing!!!
So far I've used 3 syringes of this epoxy compound. It has met or exceeded my needs. I recently repaired a broken condensation drain joint on my furnace/ac. This joint was brazed on an iron pipe in a very hard to get to spot. Getting a torch in there was impossible. A dental inspection mirror and a bit of this epoxy and my drain pan and pipe was sealed up water tight in less than 15 minutes. I cleaned the surfaces with 99% alcohol prior to applying product. Epoxy won't stick to dirt or oil, etc... Always clean surfaces to be joined. Epoxy compounds tend to be made of 2 different viscosity compounds. This means to get an equal amount out of syringe you may have to push a bit harder on one side of syringe to equalize the force and get a 50/50 mixture. If you don't use the whole syringe, store it upside down. Clean the tip with a paper towel to minimize mixing of extant epoxy in the nozzle when you put the nozzle cap on. Great product, Also glued leather straps on my computer bag, which i frequently overloaded with too much weight. The epoxy worked great and never gave out. Really love the fact its made my life easier and extended the useful lifespan of the things in my life and saved me a ton of time and money in not having to replace things I already own.
Scritto da: Beverly Starr
Not what I expected
What a mess this project turned out to be. It definitely was not worth the money. Did not go on easily even followed instructions. Did not set and did not glue together at all. I wound up tossing in garbage. Not to my satisfaction
Scritto da: somebabsguy
Dried-out component and terrible adhesion
Bought this epoxy for re-mounting skis (to use for filling old screw holes and sealing up new ones). The self-mixing nozzle is a great idea, but didn't work... since one of the two epoxy components was just a bit too dried out to make it out of the syringe with the extremely flimsy plunger. Not sure why they're selling partially dried epoxy. Did manage to get most of the liquid out through the top end, and hand-mixed as one normally would. The dried chunks limited how much of the epoxy was actually usable, but I got some to work with. However, all of these issues made this process take longer - and with a short 8-minute working time, I ended up having to rush my mounting (not a good idea). Finally (and the nail in the coffin) was that even the epoxy I applied immediately after mixing had frankly terrible adhesion. I got some on an unintended (though unwaxed) part of my ski, and actually was able to pick it off with my fingernails after it dried. In summary, not only was this epoxy partially dried out wen I got it, but it also just doesn't adhere well to smooth surfaces. Waste of money; thank god I don't care too much about this pair of skis.
Scritto da: Jay
Fast acting, no drip ... excelleny adhesive!
Great Epoxy ... PC7. Use it all the time. Mixing nozzel is a very useful accessory. Mixes well and can be a very focused and precise application method.
Scritto da: Lance new
Descent
Works pretty good, slightly flexable, you definitely need to score the surface to be epoxyed, it won't adhear to anything smooth.
Scritto da: neal
Great flexible epoxy
Good quality product. Glued hiking boots several pair.
Scritto da: maitland lawson
Great stuff! Just make sure it is warm enough ...
Great stuff! Just make sure it is warm enough so you can depress the plunger as cold weather makes the epoxy/hardener rather stiff!

Povezani proizvodi

hot
PC proizvodi PC-Pool epoksidni kit, štapić od 4 oz koji se može oblikovati, prljavo bijeli 41116 prljavo bijeli
3.3/5

€ 30.87

PC proizvodi PC-Pool epoksidni kit, štapić od 4 oz koji se može oblikovati, prljavo bijeli 41116 prljavo bijeli
3.3/5

€ 30.87

hot
MG Chemicals - 9200-50ML 9200 strukturno epoksidno ljepilo 45 mililitara dvostruki pneumatski dozator
2.1/5

€ 74.09

MG Chemicals - 9200-50ML 9200 strukturno epoksidno ljepilo 45 mililitara dvostruki pneumatski dozator
2.1/5

€ 74.09

hot
PC Products PC-Marine epoksidni kit, 2 oz Stick, bijeli (25567) 2 oz
3.5/5

€ 32.39

PC Products PC-Marine epoksidni kit, 2 oz Stick, bijeli (25567) 2 oz
3.5/5

€ 32.39

hot
PC proizvodi PC-Woody epoksidna pasta za popravak drva, dvokomponentna 12 oz u dvije limenke, žuta 12 oz u dvije limenke epoksidna pasta
3.6/5

€ 49.22

PC proizvodi PC-Woody epoksidna pasta za popravak drva, dvokomponentna 12 oz u dvije limenke, žuta 12 oz u dvije limenke epoksidna pasta
3.6/5

€ 49.22

hot
Proizvodi za zaštitne premaze PC-Crete Epoxy Putty, cijev od 2 oz, betonsko siva (25581)
3.3/5

€ 32.43

Proizvodi za zaštitne premaze PC-Crete Epoxy Putty, cijev od 2 oz, betonsko siva (25581)
3.3/5

€ 32.43

hot
3M TALC Scotch-Weld epoksidno ljepilo DP100, prozirno, dvokomponentno brzo stvrdnjavajuće epoksidno smolo, visoke smične čvrstoće, velike tečnosti, niske viskoznosti, samonivelirajuće, 200 mL (6,76 tečnih oz) Duo-Pak
4.1/5

€ 120.22

3M TALC Scotch-Weld epoksidno ljepilo DP100, prozirno, dvokomponentno brzo stvrdnjavajuće epoksidno smolo, visoke smične čvrstoće, velike tečnosti, niske viskoznosti, samonivelirajuće, 200 mL (6,76 tečnih oz) Duo-Pak
4.1/5

€ 120.22

hot
J-B Weld 43032 UltraRez UV otporna smola, epoksidna smola, umjetnička smola, kristalno prozirna, ne žuti, 32 fl. Oz. Kit, jasno
3.2/5

€ 93.10

J-B Weld 43032 UltraRez UV otporna smola, epoksidna smola, umjetnička smola, kristalno prozirna, ne žuti, 32 fl. Oz. Kit, jasno
3.2/5

€ 93.10

hot
Sustav Tri koncentrata epoksidnih pigmenata, boca od 2 oz, crna 2 oz crna
3.7/5

€ 45.78

Sustav Tri koncentrata epoksidnih pigmenata, boca od 2 oz, crna 2 oz crna
3.7/5

€ 45.78

Otkrijte našu međunarodnu mrežu

Šaljemo u 28 zemalja, preko 200.000 proizvoda. Budite u toku, pretplatite se na newsletter.

Array

Ukupno:€ 0.00

Vidi kolicaProvjeri

Kategorije

Sve kategorije
Jelovnik Kategorije Blizu Košarica

Menu