NEIKO 10218A Set upuštajućih svrdla za drvo i metal, 1/4” tri ravni drška, 5-dijelna upuštajuća svrdla, M2 brzorezni čelik

Brand:Neiko

3.5/5

€
57.44

NEIKO 10218A 5-dijelni set alata za teške industrijske upuštače s upuštačima savršen je za profesionalce u obradi drva i stolarije, strojare i majstore "uradi sam"! Svaki nastavak za upuštanje, ili ponekad poznat kao nastavak za upuštanje, dizajniran je za brzo i jednostavno rezanje mekih metala kao što su nehrđajući čelik, drvo, guma, plastika i drugi metali koji se mogu obraditi. Dajte svojim vijcima jači spoj u rupama stvaranjem rupa za umivanje koje ovaj set svrdla može napraviti. S vrhom od 82 stupnja i dizajnom s pet žljebova stvorite rupe za pričvršćivanje u ravnini kako bi vaši projekti bili sigurno pričvršćeni.

Nema dostupnih jedinica

EAN: 0837013102182

Kategorije Alati i poboljšanje doma, Električni i ručni alati, Dijelovi i pribor za električne alate, Dijelovi i pribor za bušilice, Bitovi za upuštanje, Svrdla,

VELIČINE BITOVA: Svaki set alata za upuštanje sadrži 1/4, 3/8, 1/2, 5/8 i 3/4 svrdla koja se vrlo često koriste. UKLJUČENA JE KUTIJA ZA DRŽAČE BITOVA: Svaki set svrdla za upuštanje dolazi s aluminijskom kutijom za nošenje i jednostavno skladištenje. DIZAJN S PET ŽELBI: Svaki od 5 nastavaka za upuštanje koristi dizajn s pet žljebova koji smanjuje vibracije za glatko bušenje kao što je to slučaj u obradi drva s drškom od 1/4 inča koja omogućuje lako držanje. M2 HSS MATERIJAL: Svaki metalni nastavak za upuštanje izrađen je od visokokvalitetnog M2 HSS materijala za produženi vijek trajanja svrdla i učinkovito buši upuštače kako bi se stvorili čvrsti spojevi između vijka i materijala. PRECIZNO OBRAĐENI VRHOVI: Ova svrdla za upuštanje dolaze s 1/4 trostrukim ravnim drškom s precizno brušenim vrhom od 82 stupnja za bušenje rupa u drvu, metalima koji se mogu obraditi, mekom čeliku, plastici od stakloplastike i još mnogo toga i odgovaraju uobičajenim ručnim električnim bušilicama.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Neiko
Brand	‎Neiko
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 880 ratings 4.5 out of 5 stars
Cutting Angle String	82 Degrees
Cutting Angle String	‎82 Degrees
Finish	‎Steel
Finish Type	Steel
Finish Type	‎Steel
Included Components	‎5Pc Counter Bit Set
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	‎4.8 x 3.62 x 1.42 inches
Item model number	‎10218A
Item Package Quantity	‎1
Item Weight	‎8.1 ounces
Manufacturer	‎Ridgerock Tools Inc.
Material	High Speed Steel, Stainless Steel
Material	‎High Speed Steel, Stainless Steel
Measurement System	‎Inch
Part Number	‎10218A
Product Dimensions	‎4.8 x 3.62 x 1.42 inches
Shank Type	Straight
Shank Type	‎Straight
Surface Recommendation	‎Aluminum,Metal,Plastic,Wood
Tool Flute Type	‎Tri-Flat

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s^*

Vaša ocjena

Scritto da: Ronald P.

Durability of countersink

Quality and durability. High quality of storage of storage box .

Scritto da: Tommy Graves

Nice quality with nice smooth cut!

Nice perfectly smooth cut and worked perfect for me.

Scritto da: Lee Nelson

Good little set of counter sink

For wood and fiberglass they work good . I bought them for work and use them multiple times a week and I have been very satisfied with them. Like any precision tool use light pressure do not force it.

Scritto da: poetic_justice_

4-Stars with Potential for 5-Stars

I really like these Neiko countersink bits, but cannot give them 5-stars. I've only used them with wood (pine and fir), not metal. As other Amazon members have pointed out, they arrive dull. As a result, every wood application I've used them on has been left with small burrs and uneven surfaces in the countersink holes. However, the wood screws I use cover 90% of the wood burrs and hide the uneven countersink holes. The remaining 10% of problems visible around the screw head I can usually sand out. Since I am not a professional carpenter, these Neiko bits are excellent for personal woodworking projects. Even though they arrived dull, they haven't gotten worse with repeated use, meaning the metal is higher quality than some of my drill bits. With a bench grinder and the right angle, I believe it would be possible to sharpen these countersink bits to a 5-star sharpness. I am no expert on metal, but I believe that once sharpened, these Neiko countersink bits could maintain their sharpness for some time. They would definitely make smoother countersinks with fewer burrs. Unfortunately, I don't have an angle grinder. However, even at 50% sharpness, these bits make decent countersinks for an amateur like myself. If you have an angle grinder, it might be worth your time to look into these as opposed to Irwin or other more expensive brands. Wood doesn't care about the name on the tool; it only responds to how sharp or dull the tool is, as well as the skill behind it.

Scritto da: Bill

They are sharp.

Nice container look to be good quality and sharp.

Scritto da: DVB

Could be sharper

Good quality, but could be sharper. They also chatter quite a bit unless you countersink *before* drilling the screw hole rather than after. The case is a nice touch. Overall, Neiko makes decent stuff, but this product could use some refinement.

Scritto da: ExAlaskan

Good for DYI Use

Purchased the Neiko 10218A Countersink Drill Bit Set, M2 High Speed Steel, 1/4” Tri-Flat Shank | 1/4”-3/4”, 5 Piece Set with Carrying Case for general DIY use. The set arrived in an aluminum storage case. Even though the case is designed to hold the bits in a rubber-type padded insert, one of the bits came loose during shipping and it bounced around enough to dent the corner of the case. The case is still usable and there is no apparent damage to the bit. PROS • The 3-side bit shanks fit well and lock securely in all of our drill chucks. • Bits appear sharp but have not tested them on various materials. Little doubt they will work well in wood and soft aluminum….real test will be mild steel. • Good selection of sizes. CONS • Chucked each countersink bit in our commercial quality drill press (that has very little spindle runout) to check the wobble (runout) at the point of each bit. Two of the bits had very noticeable wobble. There is some question if we will be able to get a good quality countersink with those two bits. • Clasp on case is already loose so we don’t expect the case to last long. At least the hinges are holding together so far. Recommend you consider this product if you are interested in a low priced set for general use around the house (especially if you purchase the set during a Lightening Deal). Just don’t plan on using these bits where you need high accuracy countersinks. This product was not provided as a sample for this review, so none of these comments are influenced in any way by the seller.

Scritto da: The professional

Weak metal and too much bounce

This product may be good for wood working, but not for countersinking holes in metal. They just don't last. This my opinion.

Scritto da: Jason, Carlisle, ONT

Really rough holes

The build quality seems really good, I only gave them a 2/5 due to the rough finish they leave. My old ones were a single flute and left a perfectly smooth countersink, these leave a jagged rough hole that you would never want for finished work. If you are using these in a concealed spot, they are likely a 4/5. Only reason for the 1 star deduction was because I did seem to think I needed to push really hard even in pine to get the countersink vs my $20 single flute set.

Scritto da: Amazon Customer

Not the quality I expect of Neiko

I have purchased a fair amount of Neiko items over the past few years, and have always been satisfied with the quality. The finish on these bits is dismal at best. The cutting edges of the flutes are really rough, and poorly finished. Pretty scabby looking. In hindsight, I would have spent a bit extra and gotten something better.

Scritto da: Ron H

quality item

they are well made and come in a nice box...3 flats on the shank insure positive grip in the chuck...that extra bit of manufacture tells you they are superior in build.

Scritto da: Brian

disappointed with their performance

nice kit and nice and sharp, however these bits cut a corrugated-like counter sink dives, not nice and smooth. Quite disappointed with their performance for the money. My old, much cheaper set, cut a much smoother divit.

Scritto da: Harls

Good for the price

Pretty good. Nothing to write home about, but they’re pretty good for the price. I use them on aluminum and so far so good. I’d say they’re on par with Irwin