Hubbell-Raco 808U 1/2-inčni podignuti četvrtasti poklopac s izloženim dijelom 1 GFCI Duplex ili preklopni, 4-inčni

Brand:Raco

3.6/5

27.72

Utori za ugradnju pod kutom kompenziraju do 12 stupnjeva za neusklađenost kutije. Nacrtana konstrukcija. Hardver i poklopac pakirani su u polietilensku vrećicu s otisnutim kataloškim brojem, sukladnostima i uputama za instalaciju. RACO izložene radne navlake ispunjavaju zahtjeve 2014 NEC članka 250.146(A). Nije potreban vezni premosnik za poklopce sa: (1) zgnječenim kutovima. Uključuje potreban hardver za montažu spremnika(a).

Utori za ugradnju pod kutom kompenziraju do 12 stupnjeva za neusklađenost kutije. Nacrtana konstrukcija. Hardver i poklopac pakirani su u polietilensku vrećicu s otisnutim kataloškim brojem, sukladnostima i uputama za instalaciju. RACO izložene radne navlake ispunjavaju zahtjeve 2014 NEC članka 250.146(A). Nije potreban vezni premosnik za poklopce sa: (1) zgnječenim kutovima. Uključuje potreban hardver za montažu spremnika(a).
Brand Raco
Color 4.1900000000000004
Finish Type Painted
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 0.56 x 4.13 x 4.13 inches
Item model number 808U
Manufacturer Hubbell
Product Dimensions 0.56 x 4.13 x 4.13 inches; 5.93 Ounces
Switch Type Toggle

3.6

8 Review
5 Star
74
4 Star
14
3 Star
5
2 Star
2
1 Star
5

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s*

Scritto da: JayBofMA
Served it's purpose.
I used this cover to replace an old flat cover on a 4" metal box. The old cover would not accommodate the rectangular shape of my device. I was installing a timer to replace an old manual switch. Unfortunately the design of this cover did not fully accommodate the full length of the flange that would attach to a standard switch box. I needed to cut the flange short enough to fit within the ccurve of the bump our of the cover. Fortunately, there was still enough flange left to attach to switch to the cover. If this cover were flat, this would not have been an issue. And since this box was a standard depth, I did not need the added depth provided by the bump out.
Scritto da: David Allen
Nice product.
Your usual 4 square electrical box with decor cover and inserts.
Scritto da: FRANK
use 6-32 nut with replacement faceplates
You can use different faceplates with this but need to use solid 6-32 nut to hold faceplate in place with outlet or switch. I tried the plastic nut that comes with device and outlet would just push it off threads. This due to fact that you arent able to screw device directly into metal box as it is 4" corner threaded metal box.
Scritto da: Stuart Shapiro
Good value
Easy to install.
Scritto da: muckamuck
works fine, maybe a bit tight
works fine but I had to sort of force the cover over the dual socket...they made it a bit to tight for the sockets I bought.
Scritto da: THOMAS N.FARRELL
GREAT PRODUCT
WORKS WELL
Scritto da: Mark S. Vieyra
they worked
The item arrived on time and fit
Scritto da: Troy
Screw hole to large and switch hole not large enough.
The Decora opening isn't sufficiently sized on either the x or y axis for many of today's decora switches. Also the screw hole is way larger than it should be and screws that come with any switch won't work.

Povezani proizvodi

hot
Legrand-Pass & Seymour WPB1 15A
3.3/5

€ 22.52

Legrand-Pass & Seymour WPB1 15A
3.3/5

€ 22.52

Otkrijte našu međunarodnu mrežu

Šaljemo u 28 zemalja, preko 200.000 proizvoda. Budite u toku, pretplatite se na newsletter.

Array