Hakko CHP 00D-SA pinceta s finim vrhom, ravna, nazubljena fina vrhova, nemagnetski nehrđajući čelik, otporna na koroziju, nazubljeni rukohvat, 4-1/2 duljina, srebrna

Name: Hakko CHP 00D-SA pinceta s finim vrhom, ravna, nazubljena fina vrhova, nemagnetski nehrđajući čelik, otporna na koroziju, nazubljeni rukohvat, 4-1/2 duljina, srebrna
Brand: Hakko
SKU: 0641328023090
Price: 31.05 EUR
Availability: InStock

Brand:Hakko

3.1/5

€
31.05

Hakko CHP 00D-SA uzorak 00D finih pinceta ima ravni ravni vrh i nazubljeni držač za upotrebu u aplikacijama za sklapanje elektronike. Ravni vrh pruža snažnu snagu stiskanja, a nazubljena osovina osigurava sigurno držanje. Unutrašnji nazubljeni vrh osigurava sigurno držanje pri radu s tankim materijalima. Nemagnetska konstrukcija od nehrđajućeg čelika otporna je na koroziju. Pinceta je duga 4-3/4 (120 mm). American Hakko Products proizvodi alate za lemljenje i odlemljivanje. Tvrtka, osnovana 1984. godine, ima sjedište u Valenciji, CA.

Iznos

Dodaj u košaricu Kupi sada

EAN: 0641328023090

Kategorije Alati i poboljšanje doma, Električni i ručni alati, Ručni alati, Industrijske pincete,

4-3/4 (120 mm) duljine. Nemagnetska konstrukcija od nehrđajućeg čelika otporna je na koroziju. Nazubljena osovina osigurava sigurno držanje. Unutrašnji nazubljeni vrh osigurava sigurno prianjanje s tankim materijalima. Uzorak 00D pinceta s finim i ravnim vrhom za uporabu u sastavljanju elektronike.

Brand	Hakko
Color	Silver
Country of Origin	USA
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S.
Item model number	00D-SA
Manufacturer	Quality Hand Tools
Material	Stainless Steel
Package Dimensions	6 x 3 x 1 inches; 0.01 Ounces
Style	Classic

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s^*

Vaša ocjena

Scritto da: James McDonald

Very good quality

Bought for work, use for wire wrap removal. This is the grabbiest, best set of tweezers I own. Would definitely buy again if needed.

Scritto da: Ken Wing

the best tweezers out there

these are the best tweezers out there! fine tip, serrated, will grab anything and they are precision - the tips always close perfectly

Scritto da: David Kern

Would have liked them to be able to pick up tiny pieces of lint off my project but have to turn on its side so not real happy with them for what I needed them for. But if you don't need to pick up very tiny pieces then they are fine and work well.

Scritto da: Avisace

1 good 1 not so good

I ordered two identical tweezers with grips and serrated tips. However, I received two different ones. I am happy with the actual one I ordered, its very sturdy, has a strong grip, and is exactly what I was looking for to replace my aging Techni-tool set. The other one I received is thinner, weaker and non-serrated. It's a good pair of tweezers, but not what I needed. For the price, it's a good deal, but you might not get what you order.

Scritto da: Aaron Dixon

Sharp tip but no grip.

While these tweezers are sharp in regards to being a precision tip, they offer very little in regards to grip. The "serrated" tips seem worn down and can't actually grip anything. I will still keep them as they may be good for other things but "gripping" things with a little force isn't one of them.

Scritto da: Stan

Good Quality

These are decent quality tweezers. The tips align and they are just stiff enough, without being overly stiff to overcome the inferior metal. I previously purchased a set of 6 black ESD tweezers that were about 1/2 the price of these. Wish I had spotted these first as could have saved some money and grief. Not in the same league as A. Dumonts & Fils, (Swiss) but still superior to the Black ESD labeled ones. Mine did state they were made in Italy, and not China.

Scritto da: Brian Rhys

Best pair of tweezers you can buy... (sub-$50)

If you're on the hunt for a rigid and beefy set of tweezers that won't completely deform when you actually put a little extra strength in your squeeze - this is it. There are better tweezers out there, sure ... if you want to pay $70-120+ for a single pair. No thnx. IMHO these(CHP-000-SA) along with Hakko CHP 4-SA (for the SMD type work) are the best for the money. DO NOT waste your money on CHP SS-SA ... They are anorexic, limp in the hand garbage.... (IMO)

Scritto da: sbh1950

Best I've used.

I use tweezers for a lot of things in my work, and these are the best so far. For picking things up you can't beat the serrated tips, and they're not tiny and fragile, but small and very sturdy. they are also stiff enough to bend wire without flexing badly, as can a lot of other models. I keep 3 pair on my bench at all times, so they'll always be right at hand, no matter what I'm doing.

Scritto da: Amazon Customer

Terrible quality. Likely fakes or Hakko has vastly dropped their quality..

Terrible quality. Not sure if these are fakes BUT I'm not going to buy ANY Hakko Tweezer from now on. ISSUE: The spot welds broke apart / separated on my second use. I was gentle with them since these are for fine work. Inspecting the spot welds, I could see the metal was not correcyly melted together properly. Also the tips did not correctly align nor dis the serrations. I would avoid these Tweezers. You can get much better tweezers for less here on amazon.

Scritto da: Elly AAA

Awkward size

Awkward size (it's huge) and not as pointy of a tip as I was expecting.