CURT 56261 Prilagođeni 4-polni kabelski svežanj za prikolicu na strani vozila, odgovara odabranoj Toyoti Sienna

Name: CURT 56261 Prilagođeni 4-polni kabelski svežanj za prikolicu na strani vozila, odgovara odabranoj Toyoti Sienna
Brand: CURT
SKU: 0612314562619
Price: 117.78 EUR
Availability: InStock

Brand:CURT

3.7/5

€
117.78

Ako vaše vozilo nije opremljeno ožičenjem za vuču prikolice, CURT prilagođeno ožičenje je idealno rješenje. Prilagođeni kabelski svežanj -- koji se naziva i T-priključak -- je jednostavan, plug-and-play električni uređaj koji se uključuje u električni sustav vašeg automobila i pruža standardnu, univerzalnu vezu žica prikolice. To se radi pomoću dva ili više OEM-kompatibilnih konektora specifičnih za vozilo za priključivanje u sklop stražnjeg svjetla, eliminirajući potrebu za rezanjem, spajanjem i lemljenjem tijekom instalacije. Prilagođeni kabelski snopovi izrađeni su za pojedina vozila i iako nisu dostupni za sva vozila, nude jedan od najbržih, najlakših i najsigurnijih načina povezivanja vozila za vuču. Ovaj konkretni kabelski svežanj ima 4-smjernu ravnu utičnicu i dizajniran je kao prilagođeni kabelski svežanj koji odgovara određenim godinama Toyote Sienna (za provjeru kompatibilnosti vašeg vozila, pogledajte informacije o aplikaciji). Dolazi sa svim potrebnim komponentama ožičenja za uspostavljanje pouzdane veze ožičenja prikolice, kao i poklopcem za prašinu koji održava konektor čistim kada se ne koristi. Na umu imate sliku svog sljedećeg odredišta -- možda je to čamac koji pristaje na vašem omiljenom mjestu za pecanje, možda je to kamp s pogledom na jedno od remek-djela prirode ili je to možda sljedeće veliko gradilište. Međutim, pretvaranje te slike u stvarnost zahtijeva više od pukog sanjarenja. Potrebna je čvrsta veza i odgovarajuća količina snage. CURT prilagođeno ožičenje izrađeno je pomoću neke od najsofisticiranijih tehnologija u industriji i dizajnirano je za jednostavnu ugradnju, dajući vam dugotrajnu električnu vezu za postavku kuke za vuču.

Iznos

Dodaj u košaricu Kupi sada

EAN: 0612314562619

Kategorije Automobilizam, Vanjski dodaci, Proizvodi za vuču i vitla, Pribor za kuku, Ožičenje,

POKLOPAC ZA PRAŠINU. Kako bi se potaknula dugotrajna upotreba i otpornost na vremenske uvjete, ovaj 4-polni kabelski svežanj za rasvjetu prikolice dolazi s gumenim poklopcem za prašinu. Lako se postavlja na 4-smjerni plosnati konektor kada nije u upotrebi, štiteći ga od vanjskih, vanjskih elemenata i unutarnje korozije. POUZDANA SNAGA. Ovaj 4-smjerni kabelski svežanj prikolice izrađen je tehnologijom površinske montaže. Ova vrsta strujnog kruga stvara manje topline, ima optimalan intenzitet svjetlosti i izdržljive performanse. SPECIFIČNO ZA VOZILO. Ovaj naknadni, kabelski svežanj za vozilo-prikolicu dizajniran je za odabrane godine Toyote Sienna. Ovo osigurava najlakšu moguću instalaciju i najpouzdaniju vezu ožičenja. Krugovi zakretanja i kočenja: 3 A. STANDARDNI PRIKLJUČAK. Ovo priključno 4-plosnato ožičenje prikolice može se koristiti za spajanje stražnjih svjetala prikolice, signalnih svjetala kočnica i pokazivača smjera. 4-smjerno ožičenje svjetala za prikolicu popularno je na širokom spektru prikolica, dodajući raznolike mogućnosti vuče za vaše vozilo. LAGANO ZA UGRADNJU. Nema rezanja! Bez spajanja! Ovaj komplet kabelskog snopa prikolice uključuje se u postojeću tvorničku instalaciju na vašem vozilu i oprema ga standardnim, stražnjim 4-pinskim priključkom za ožičenje prikolice za priključivanje i vuču prikolice ili dodatne opreme. Vrsta prilagodbe: specifično za vozilo.

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.6 4.6 out of 5 stars 302 ratings 4.6 out of 5 stars
Exterior	‎Painted
Is Discontinued By Manufacturer	‎No
Item model number	‎56261
Item Weight	1.6 Pounds
Item Weight	‎1.6 pounds
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎56261
Material	Rubber
Model	‎Custom Wiring
OEM Part Number	‎BKDK56261

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s^*

Vaša ocjena

Scritto da: Amazon Customer

Plug and play, easy hookup

We like the Curt plug and play products for Toyota vehicles. This is the third one we have tried, and they work great. Easy installation. You do usually have to run a wire to the battery, so be prepared to get a little bit dirty. (On the Sienna van, we stole power from the little light in the back right side, so didn’t have to get under the car)

Scritto da: Amazon Customer

Works as advertised.

A company installed the first 2 of these in my vehicle, and they would only last 2 years each. Now i know why. The power wire was touching the exhaust, and the module was spliced in with those blue t clips and hanging from the left rear taillight and dangling between bumper plastic and frame. Not enough wire to get to module from top or bottom. Grrrrrr. Some advice, get this and do it yourself. Mount it on the inside of the vehicle to keep it sheltered from rain, and so it doesn’t bang around with every start or stop. Is not hard to install at all.

Scritto da: A. Langer

Fit was good, instructions are lacking

This fit our 2015 Toyota Sienna just fine. As others have said, I was expecting the difficulty in getting the wire under the van up to the battery. I jacked up the rear of the van to help some and use a fish tape in some spots. I had no idea where to mount the black box behind the paneling. When I decided on a place, the the peel and stick pad fell off immediately and had no stick. I don't know if it was because it was only 40 deg, but it felt more like it was old adhesive. So I zip-tied it to a bracket there. Hopefully it doesn't bang around too much. Also, the red fuse holder/wire provided was not a very flexible plastic and I felt like it was going to break just closing the cap. Directions were ok, but they were just tiny black and white images and I could barely see what was going on. This is 2022 I expect a lot more. I guess that's why we all watch a video online first, but the instructions should hold their own.

Scritto da: Amazon Customer

Works well, but read this before installing

Installed in Toyota Sienna 2015. Overall, good kit but things you should know... 1) ***Install control unit on passenger side of car*** There's more room, there's a car jack compartment to store the cable when not being used, and you can use electricity from the right outlet (see next point). This means running the green wire to the left blinker and yellow wire to the right blinker. This will later require you to cut the green/yellow wires coming out of the control unit and switch them or your blinkers will be backwards. Not hard to do with simpler wire couplers. 2) If your vehicle has a 12V outlet (cigarette style) in the passenger rear next to the car jack compartment, then you can connect the black/white to that instead of running a wire all the way to the front of the vehicle. Way easier!!! You can either tap into them using a simple T-Tap, or order a male 12V plug, attach the wires to that, and "plug it in" when you need it. I went with a T-Tap since it's easier. Don't forget to install the fuse that comes with the kit on the black wire. Note: This is the 12V cigarette style outlet, not the 120V prong outlet. Your car may have both. Don't use the wrong one! 3) The instructions are useless. Luckily, lots of videos online. The only wires I cut were on the unit to switch yellow/green after it comes out of device. Pretty easy install overall.

Scritto da: Mike Partridge

Installation videos help a lot (2015 Sienna)

Connecting the wiring into the brake lights wasn't too bad. Watching a couple of installation videos helped a lot. I connected the bulk of the wiring to the driver side like it was designed for. I don't have a good way to get under the vehicle to run the wire, so I ran it under the trim on the driver's side. I didn't see a video that showed how to get the wire through the firewall to the engine but I read elsewhere that someone got it through a grommet. Here's how I did it: I found where the bulk of the wiring from the passenger compartment goes through the firewall (photo 1). There are seams in the insulation, so I peeled it back to the right to expose the grommet and noticed a round opening on one side (photo 2). I pushed a narrow screwdriver through and found that the opening leads to an otherwise unused protrusion on the engine side of the grommet (photo 3). I cut an X in the end of the protrusion, and because the wire is fairly stiff, was able to feed it through the opening in the grommet. Feeding it through the rest of the way to the battery was no trouble.

Scritto da: Kindle Customer

Great module! Check your year and model!

+ Works great in 2014 Toyota Sienna LE after difficult install. - Triple check your year and model - Use VIN number at toyota.com. + NOW I see Amazon had SE in "my garage" instead of LE. My fault for not checking that. + CURT's web site agrees the 2014 SE and 2014 LE use different connectors. + I also see in Q & A someone had a 2015 LE with different connectors than 2014 LE. + The power line with fuse that Curt included with this was just long enough and Curt included plenty of tie wraps to help. It reaches front battery, under van, up existing grommet hole into trunk, and over to left stop light area where module can be placed. This part of install was as easy as could be, though best done with a full car lift and a fair amount of patience. - You may be tempted to tap into the 12V access point in back for power. Don't forget that shares a fuse with your GPS, phone chargers, and any add-in DVD players you have plugged in. It may work on your trailer or with LED lights, then if you borrow a U-Haul with extra marker lights, running lights, and hit the brakes you could blow that little fuse. I decided to give the lights their own dedicated line as recommended. + Great quality! + Solid unit, well sealed, durable cables. + Much smaller than the space available for installation.

Scritto da: howard

good diy trailer wiring conversion

easy diy hook up of trailer wiring to Toyota. converts to 3 wire and does it in a simple and not fuss, cut, solder way. comes with all the required materials to get the job done quickly although you should not expect it to take 20 minutes but rather a couple of hours depending to the number of pieces of interior trim you need to remove to get access. has worked well for over a year and expect that it will continue to do so. a little pricey but I guess that is the price for simplicity

Scritto da: Wes

Hard to install power line

Worked great on our 2015 Toyota Sienna. They expect you to run the power line all the way under the car to the battery. we have AWD, so I could not find a spot to run the wire, and it seemed short. I ended up jumping power from the cigarette lighter in the back, which only has power when the car is in acc or is on, but it was better than nothing.

Scritto da: Mike Carriere

Sienna wiring harness

The wiring harness fit well and installed quickly.

Scritto da: Amazon Customer

Very happy with it

It fit very nicely and everything works great,

Scritto da: Hai Lan

perfect quality

still in good condition after very long time use