CURT 56020 Prilagođeni 4-pinski kabelski svežanj za prikolicu na strani vozila, odgovara odabranim Ford E-150, E-250, E-350 Super Duty

Brand:CURT

3.6/5

83.41

Ako vaše vozilo nije opremljeno ožičenjem za vuču prikolice, CURT prilagođeno ožičenje je idealno rješenje. Prilagođeni kabelski svežanj -- koji se naziva i T-priključak -- je jednostavan, plug-and-play električni uređaj koji se uključuje u električni sustav vašeg automobila i pruža standardnu, univerzalnu vezu žica prikolice. To se radi pomoću dva ili više OEM-kompatibilnih konektora specifičnih za vozilo za priključivanje u sklop stražnjeg svjetla, eliminirajući potrebu za rezanjem, spajanjem i lemljenjem tijekom instalacije. Prilagođeni kabelski snopovi izrađeni su za pojedina vozila i iako nisu dostupni za sva vozila, nude jedan od najbržih, najlakših i najsigurnijih načina povezivanja vozila za vuču. Ovaj konkretni utični svežanj ima 4-smjernu ravnu konektorsku utičnicu i dizajniran je kao prilagođeni kabelski svežanj koji odgovara određenim godinama Ford E150, E250 i E350 Super Duty (za provjeru kompatibilnosti vašeg vozila, pogledajte informacije o aplikaciji). Dolazi sa svim potrebnim komponentama ožičenja za uspostavljanje pouzdane veze ožičenja prikolice, kao i poklopcem za prašinu koji održava konektor čistim kada se ne koristi. Na umu imate sliku svog sljedećeg odredišta -- možda je to čamac koji pristaje na vašem omiljenom mjestu za pecanje, možda je to kamp s pogledom na jedno od remek-djela prirode ili je to možda sljedeće veliko gradilište. Međutim, pretvaranje te slike u stvarnost zahtijeva više od pukog sanjarenja. Potrebna je čvrsta veza i odgovarajuća količina snage. CURT prilagođeno ožičenje izrađeno je pomoću neke od najsofisticiranijih tehnologija u industriji i dizajnirano je za jednostavnu ugradnju, dajući vam dugotrajnu električnu vezu za postavku kuke za vuču.

POKLOPAC ZA PRAŠINU. Kako bi se potaknula dugotrajna upotreba i otpornost na vremenske uvjete, ovaj 4-polni kabelski svežanj za rasvjetu prikolice dolazi s gumenim poklopcem za prašinu. Lako se postavlja na 4-smjerni ravni konektor kada nije u upotrebi, štiteći ga od vanjskih elemenata. LAGANO DRŽANJE. Priključivanje žica i svjetala prikolice jednostavno je uz ergonomski dizajn ove utičnice za vozilo. Sadrži jezičke na vrhu i dnu za bolje držanje pri priključivanju na prikolicu ili isključivanju. SPECIFIČNO ZA VOZILO. Ovaj naknadno prodajni kabelski svežanj za vozila i prikolice dizajniran je za odabrane godine Ford E 150, E 250 i E 350 Super Duty. STANDARDNI PRIKLJUČAK. Ovo priključno 4-plosnato ožičenje prikolice može se koristiti za spajanje stražnjih svjetala prikolice, signalnih svjetala kočnica i pokazivača smjera. 4-smjerno ožičenje svjetla za prikolicu popularno je na raznim prikolicama, dodajući raznovrsne mogućnosti vuče za vaše vozilo. LAGANO ZA UGRADNJU. Nema rezanja! Bez spajanja! Ovaj komplet kabelskog snopa prikolice uključuje se u postojeću tvorničku instalaciju na vašem vozilu i oprema ga standardnim, stražnjim 4-pinskim priključkom za ožičenje prikolice za priključivanje i vuču prikolice.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 190 ratings 4.6 out of 5 stars
Exterior ‎Smooth
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 4 x 3 inches
Item model number ‎56020
Item Weight 0.71 Pounds
Item Weight ‎11.4 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56020
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎56020
Product Dimensions ‎9 x 4 x 3 inches

3.6

11 Review
5 Star
80
4 Star
8
3 Star
5
2 Star
2
1 Star
5

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s*

Scritto da: Kel
Worked great!
This worked great for my 2008 e350 ford. The instructions didn't work for my passenger model though. I had to follow a video from etrailer, this harness is almost the same as theirs but it doesn't have the long wire for ground (so it's much easier to install).
Scritto da: JDeMattos
Hyperflash on left signal ONLY.
Plug and play harness. Instructions are pretty vague but it’s not rocket science. They essentially “piggyback” off of the stock tail light bulbs. They should label right and left. Thankfully I tested before reinstalling everything and figured out I had it backwards. Right signal works as it should on my van and my trailer but left signal is blinking twice as fast or what’s known as “hyperflash”. All lights are operable so it sure why only one side is flashing faster than the other. Docked a star for that. Other than that, works as it should.
Scritto da: KL
Works but seems poorly planned
We installed this in a 2014 E350. It works well enough and it IS worth it simply for the factory style plugs at each tail lamp. However, the right (green/white) side was too short (at least for how I chose to install it) and the left (yellow/brown) was inexplicably long - VERY long. I actually wound up splicing in about 2' of green and white wire, so you might consider having some green and white primary wire on hand along with some butt connectors. Note the included instructions talk about slitting a grommet but I could not locate said grommet and it was not mentioned in the YT video, either. I was simply able to run through a hole where the taillight wires entered and down behind the plastic trim of the last pillar, then under the kick plate. The hole did not feel like it had any sharp edges and actually felt nicely finished. Now, from the kick plate I took advantage of 2 oval slits next to the door striker. I believe other reviewers have alluded to this as well. I put all 4 wires of this harness in plastic loom to protect them as they pass down through the body. Our vehicle had a tapped hole in this area as well that had a plastic thumb screw of sorts. I used a 3/8" insulated rubber clip around my plastic loom and replaced the thumb screw with a standard M6x1.0 bolt, see pic. You will have to trim some rubber "grips" off the plug to get it thru the oval holes. These are just there for human finger comfort and serve no important purpose. From here I ran the plug under my hitch and again secured the wiring with an insulated rubber clip.
Scritto da: Carlos Carlo
Easy to install and have trailer lights
Not too much to say about this other than it went in easy hooked up easy and works fantastic. One thing I think could be better is a little more detailed instruction and maybe color-coded step by step instruction be nice but not really necessary it's definitely worth purchasing this kit and installing it in your van so you have trailer lights it's pretty cool
Scritto da: James M. Droddy
Perfect fit
Fit perfectly. Just takes some time to install on the van since you have to run the wiring to both lights. However, works perfectly.
Scritto da: Notso
1 tool required
I just needed a hex bit to remove my tail lights then these were plug-n-play. Fantastic kit. Saved me the time of splicing wires etc...
Scritto da: T in florida
Easy to install vehicle trailer harness
The harness was incredible simple to install on a 2013 Ford E-350 full size van
Scritto da: Roger Ferrer
Muy bueno
Muy bueno
Scritto da: mike
Great product
Very simple plug and play ! Highly recommend
Scritto da: GERARD ARSENAULT
nice set up
foul proof 15munute job
Scritto da: Amazon Customer
Easy install and works.
Straightforward to install and worked as expected.

Povezani proizvodi

Otkrijte našu međunarodnu mrežu

Šaljemo u 28 zemalja, preko 200.000 proizvoda. Budite u toku, pretplatite se na newsletter.

Array