0
0

Ukupno:€ 0.00

Vidi kolicaProvjeri
LoginRegister
0

Ukupno:€ 0.00

Vidi kolicaProvjeri
LoginRegister

Chicago Latrobe 69852 159 set kratkih svrdla od brzoreznog čelika u metalnom kućištu, završna obrada od crnog oksida, 135 stupnjeva rascjepa, inča, 21-dijelni, 1/16 - 3/8 u koracima od 1/64

Brand:Chicago Latrobe

3.7/5

€
131.57

Greenfield Industries je vodeći proizvođač potrošnog reznog alata i srodnih proizvoda. Tvrtka prodaje tisuće proizvoda pod markama Cleveland, Chicago-Latrobe, Cle-Line, Vermont Tap & Die, Bassett i Putnam Tools, Geometric, Vers-O-Tool, H & G i Acme-Fette. Linije proizvoda uključuju svrdla, čelna glodala, nareznice, matrice, razvrtala, upuštače, bušotine, nastavke za alate i još mnogo toga. Ovi se alati koriste u različitim primjenama. Ako se buše, režu, buše, kopaju, oblikuju, glodaju, utiskuju, oblikuju, izvlače ili urezuju navoje, proizvodi Greenfield Industries su naporni za rad. Godine 2009. Greenfield Industries postao je dio Top-Eastern grupe, najvećeg svjetskog proizvođača spiralnih svrdla. Spajanje ovih dviju moćnih tvrtki omogućuje objema globalne kapacitete potrebne za uključivanje na svjetska tržišta alata za rezanje. Kombinirajući prednosti proizvodnih pogona svjetske klase, iskusne prodaje i tehničke podrške te dobro poznatih i cijenjenih robnih marki, Greenfield Industries tržištu donosi dobitnu kombinaciju. Kako naša obitelj kupaca, distributera, zaposlenika, proizvoda i usluga nastavlja rasti, zadržavamo svoju predanost izvrsnosti.

Nema dostupnih jedinica

EAN: 0662355698525

Kategorije Električni i ručni alati, Dijelovi i pribor za električne alate, Dijelovi i pribor za bušilice, Twist Bits, Svrdla, Svrdla sa šesterokutnim prihvatom,

Posebno debela mreža za povećanu čvrstoću i krutost u usporedbi sa standardnim svrdlima. Proizvedeno u SAD-u. Samocentrirajuća točka rascjepa od 135 stupnjeva prodire u tvrdi materijal bez pilot rupe i proizvodi male strugotine kako bi se smanjilo začepljenje. Završna obrada od crnog oksida smanjuje trošenje dok potiče strugotinu i protok rashladne tekućine na željeznim materijalima. Brzorezni čelik (HSS) daje tvrdoću za otpornost na trošenje. Set od 21 kratkog svrdla uključuje veličine inča od 1/16 do 3/8 u koracima od 1/64.
Batteries Required? ‎No
Brand Chicago Latrobe
Brand ‎Chicago Latrobe
Country of Origin ‎USA
Customer Reviews 4.7 4.7 out of 5 stars 44 ratings 4.7 out of 5 stars
Cutting Angle String 135 Degrees
Cutting Angle String ‎135 Degrees
Domestic Shipping Item can be shipped within U.S.
Finish ‎Black Oxide
Finish Type Black Oxide
Finish Type ‎Black Oxide
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH ‎1.1 x 6.8 x 4.1 inches
Item model number ‎69852
Item Package Quantity ‎1
Item Weight ‎1.35 pounds
Manufacturer ‎Greenfield Industries
Material High Speed Steel
Material ‎High Speed Steel
Measurement System ‎Inch
Part Number ‎69852
Power Source ‎Battery Powered
Product Dimensions ‎1.1 x 6.8 x 4.1 inches
Shank Type Straight
Shank Type ‎Straight
Surface Recommendation ‎Cast Iron,Steel
Thickness ‎11 Inches
Tool Flute Type ‎Straight
Tool Tip Description ‎Split Point

3.7

10 Review
5 Star
83
4 Star
8
3 Star
5
2 Star
0
1 Star
4

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s*

Scritto da: Lost In Silent Hill
Great Product!
I purchased this “shorty” drill bit set to fit in a super tight space with an 90 degree angle drill and some cutting oil. This set was Exactly what I needed for the tight fit on my tractor. A+, Recommended!
Scritto da: Samuel Meredith
Best purchase since my lathe and mill
Even using a centering bit I have been frustrated with bent, wobbly, wandering drill bits and inaccurate holes using my lathe. I work with brass, mild steel, some aluminum and rarely need to drill deeper than 1” in smaller sizes., 1/16 through 3/8. These seem dandy right out of the box. I will report later if issues of loss of cutting edge arise.
Scritto da: Robert Robinson
Drill Bit set
Very nice set of drill bits in a durable metal closing cast. Just what my husband wanted.
Scritto da: T. S.
Great for Taig
What makes these bits stand out is their extremely short size. I was having trouble finding bits that had enough Z clearance on my Taig mill. I purchased these bits along with a metric set of ER-16 collets (to hold the bits directly instead of using the jacob's chuck) and it has been a night and day difference. I can actually use most of the sizes in the set now at the same time as a vise. The price is so mellow too, I'm not sure why I didn't make the switch sooner.
Scritto da: David J. Brunell
Quality, USA-made drills
I was looking for a set of drills for my Proxxon FF 230 micro mill/drill, and this set is perfect. With a small milling machine, there often isn't a lot of vertical clearance, and jobber-length drills in the larger sizes are simply too long. With screw-machine-length drills, I can usually establish a reference with my edge/center finder and then immediately insert the correct drill without changing the table-to-spindle distance. These drills are sharp and run true. I've bought a few Chinese drill sets lately, and while you may be able to pick up a 115-piece set for less than $50, good luck drilling metal with them and having the hole be round and close to the desired size.
Scritto da: tekHedd
Sharp, inexpensive
Great for the price. Of course, at the price they could be total crap and still be "great for the price", but they do seem to be decent quality. I'm working aluminum, so I can not rate the durability, but they are initially quite sharp and cut well, at least. I'll be back with an update if I have problems.
Scritto da: danielwayneupchurch
Quality drill bits!
Stubby drill bits work great in my magnetic base drill. A must have for these kind of drills! Wish I could find stubby drill bits larger than 1/2”.
Scritto da: CarbonF33
Great bits so far.
I have only had these bits a couple of months but I have used them enough to have an idea about their quality. They are sharp and cut mild steel and aluminum with no problem. I got them because of clearance problems with my Mini Mill, but I have also found that the short length makes it possible to skip drilling a pilot hole with a center drill; they are much less prone to "walk".
Scritto da: Amazon Customer
Nicely made , black finish
Good for small machine work , stiffer than long drills.
Scritto da: mike
good price
Perfect size

Povezani proizvodi

hot
Greenlee 149H2-2 EZ svrdlo provrta, 2 inča promjera 2 inča
3.3/5

€ 75.69

Greenlee 149H2-2 EZ svrdlo provrta, 2 inča promjera 2 inča
3.3/5

€ 75.69

hot
DEWALT DWADT1024 UNC slavina za bušenje, 10-24
3.3/5

€ 32.09

DEWALT DWADT1024 UNC slavina za bušenje, 10-24
3.3/5

€ 32.09

hot
BOSCH TC100 5/32 In. x 3-1/2 In. Svrdlo za zid sa šesterokutnom plosnatom drškom 3-1/2-inča
2.6/5

€ 27.55

BOSCH TC100 5/32 In. x 3-1/2 In. Svrdlo za zid sa šesterokutnom plosnatom drškom 3-1/2-inča
2.6/5

€ 27.55

hot
Set bitova za šarke
3.4/5

€ 44.43

Set bitova za šarke
3.4/5

€ 44.43

hot
9/64 Brza izmjena svrdla od brzoreznog čelika sa šesterokutnim prihvatom, serija KFDHEX (paket od 12)
3.6/5

€ 40.81

9/64 Brza izmjena svrdla od brzoreznog čelika sa šesterokutnim prihvatom, serija KFDHEX (paket od 12)
3.6/5

€ 40.81

hot
Milescraft 2307 PocketBit - svrdlo za rupe sa šesterokutnim prihvatom, model: 23070003
3.5/5

€ 31.74

Milescraft 2307 PocketBit - svrdlo za rupe sa šesterokutnim prihvatom, model: 23070003
3.5/5

€ 31.74

hot
DEWALT čekić za razbijanje, glinena lopata, šesterokutni, 20-inča x 1-1/8-inča (DW5965)
3.2/5

€ 163.85

DEWALT čekić za razbijanje, glinena lopata, šesterokutni, 20-inča x 1-1/8-inča (DW5965)
3.2/5

€ 163.85

hot
Bosch HSP-HS 1/4 Hex 4 brzorezni čelični pilot bit
3.9/5

€ 31.08

Bosch HSP-HS 1/4 Hex 4 brzorezni čelični pilot bit
3.9/5

€ 31.08

Otkrijte našu međunarodnu mrežu

Šaljemo u 28 zemalja, preko 200.000 proizvoda. Budite u toku, pretplatite se na newsletter.

Array

Ukupno:€ 0.00

Vidi kolicaProvjeri

Kategorije

Sve kategorije
Jelovnik Kategorije Blizu Košarica

Menu