Champion DT22HEX-1/2-13 Kombinacija 1/2-13 svrdla i nareznice sa šesterokutnim prihvatom

Name: Champion DT22HEX-1/2-13 Kombinacija 1/2-13 svrdla i nareznice sa šesterokutnim prihvatom
Brand: Champion Cutting Tool Corp
SKU: 0846035066112
Price: 58.25 EUR
Availability: InStock

Brand:Champion Cutting Tool Corp

3.2/5

€
58.25

OD PROIZVOĐAČA Champion DT22Hex kombinacija bušilice i nareznice stvara rupe i nareznice u jednoj radnji bez potrebe za središnjim bušenjem ili probijanjem. Mogu se koristiti u kabelskim, akumulatorskim i udarnim bušilicama.

Iznos

Dodaj u košaricu Kupi sada

EAN: 0846035066112

Kategorije Električni i ručni alati, Dijelovi i pribor za električne alate, Dijelovi i pribor za bušilice, Twist Bits, Svrdla, Svrdla sa šesterokutnim prihvatom,

Primjene uključuju: građevinu, elektriku, održavanje, industriju, automobile, strojeve za poljoprivredne strojeve, HVAC. Reže čelik, lijevano željezo, aluminij, broncu, mesing, cink i nešto nehrđajućeg čelika. Vrhunska čvrstoća i izdržljivost koju osigurava visok sadržaj molibdena i brzorezni čelik s funkcionalnom crnom i zlatnom površinskom obradom koja zadržava mazivo za glatko bušenje. Svrdlo s razdjelnom točkom od 135 stupnjeva omogućuje izrezivanje rupa velikom brzinom. Morate se pridržavati opreza pri snimanju sporijom brzinom. Dizajn suženog vrata značajno smanjuje lom svrdla i nareznice.

Brand	Champion Cutting Tool Corp
Brand	‎Champion Cutting Tool Corp
Country of Origin	‎Taiwan
Customer Reviews	4.1 4.1 out of 5 stars 48 ratings 4.1 out of 5 stars
Cutting Angle String	135 Degrees
Cutting Angle String	‎135 Degrees
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Black and Gold
Finish Type	Black and Gold
Finish Type	‎Black and Gold
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	‎4.2 x 0.8 x 0.6 inches
Item model number	‎DT22HEX-1/2-13
Item Package Quantity	‎1
Item Weight	‎0.32 ounces
Manufacturer	‎Champion Cutting Tool
Material	High Speed Steel
Material	‎High Speed Steel
Measurement System	‎Inch
Part Number	‎DT22HEX-1/2-13
Product Dimensions	‎4.2 x 0.8 x 0.6 inches
Shank Type	Hex
Shank Type	‎Hex
Size	‎HEX-1/2-13
Surface Recommendation	‎Aluminum,Brass,Cast Iron,Stainless Steel,Steel
Tool Flute Type	‎Spiral

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s^*

Vaša ocjena

Scritto da: Scott L.

Exceeded expectations and I'm going to buy the set

I saw some reviews that made me sceptical. I was hesitant to buy the whole set so I just bought the one I needed at the time. This was a 1/2" x 13 tap. I drilled and tapped 50 holes in 3/8" (A36 carbon steel) material and the bit is still going strong. You should have no issues with this bit as long as you use it properly. Keep it lubricated during cutting/tapping and don't use excessive force. I love the product and plan to buy the whole set.

Scritto da: Eli

Worked Great on Engine Block

This tap along with some tap magic lube,, made quick work tapping dowel holes in a cast iron 351W engine block for a 6R80 transmission conversion. I bought another traditional botton tap just in case, but didn't have to use it. The drill portion served to line up the tap so it was perfectly straight. I was impressed with the ease at which I was able to tap it by hand.

Scritto da: JeepCJ7

Stays sharp

Used it to drill holes in my jeep frame so I could reinstall my crossmember. Worked like a charm. I did predrill with smaller bit but that's because I did not want it to brake. Cut 7 holes no problem.

Scritto da: Thomas K.

Broke TAP ON FIRST USE, I WAS TRYING TO USE IT ON SOME 3/3'[ ALUMINUM.

WELL, IT DID DRILL A NICE HOLE BEFORE IT BROKE.

Scritto da: Mohamed

Good price for the performance

This is a very efficient to use product. I got to use it with Aluminum and mild steel, But I made some testing with Aluminum, Mild Steel & SS-304 and it the M6 toll is broken with SS, I think it needed lubrication as the tool gone red 2 seconds before breakdown. Otherwise it's a good product.

Scritto da: DannyB1954

Easy to use, easy to break

If you are drilling into something like a hollow tube, the drill part may bottom out, causing the tap part to strip the threads just made. My opinion is they break a lot easier than a regular drill and tap. I think due to the small diameter between the tap part and Apex driver part. I had the 6/32 ,8/32, and 10/32. Only the 10/32 is still unbroken. At about $10 a pop, for me not a good value.

Scritto da: Raul C

Works perfectly!

I was quite pleased with the results from using this tapper combo. I was a little hesitant at first because of the speed difference needed to tap vs drill, but it actually works quite naturally. I drilled into tagua/corozo nuts, but I could see this working on just about anything else that needs tapping. I liked it so much I'm going to buy another one in a smaller size! Just be careful once you get to the threaded section because it will naturally pull as it taps!

Scritto da: mdrn28

nice idea, but better to use a real tap set

I planned to use this to tap 6-32 screw holes while modifying computer case, but it broke on the first try when drilling a 1/8" aluminum sheet. Recommend potential buyers beware and consider using a regular drill and tap set instead.

Scritto da: B LaForge

Good tool

Like the way this works saves time