0
0

Ukupno:€ 0.00

Vidi kolicaProvjeri
LoginRegister
0

Ukupno:€ 0.00

Vidi kolicaProvjeri
LoginRegister

Alat za performanse W4001DB set SAE nareznica i matrica od 40 dijelova

Brand:‎Performance Tool

3.1/5

€
85.24

Performance Tool W4001DB set SAE nareznica i matrica od 40 dijelova je bitan set alata za narezivanje i ponovno narezivanje navoja za svakog mehaničara ili entuzijasta DIY. Ovaj sveobuhvatni set uključuje širok raspon NC, NF i NPT veličina za maksimalnu svestranost, s grubim i finim navojima za sve vaše potrebe narezivanja navoja. Uz nareznice i matrice, set uključuje ključ za nareznice, ključ za nareznice s T-ručicom, matrice, odvijač i mjerač koraka vijaka za jednostavno korištenje i precizne rezultate. Visokokvalitetni kalupi izrađeni su od izdržljivog čelika za dugotrajnu upotrebu, a puhano oblikovana plastična kutija za pohranu pruža dugotrajnu zaštitu i organizaciju za vaše alate. S 40 komada, ovaj set ima sve što vam je potrebno za rješavanje bilo kojeg zadatka urezivanja konca.

Iznos
Dodaj u košaricuKupi sada

EAN: 039564156021

Kategorije Alati i poboljšanje doma, Električni i ručni alati, Ručni alati, Utičnice i setovi utičnica, Setovi nasadnih i nasadnih ključeva,

Uključena kutija za pohranu. Čelik visoke kvalitete za precizno rezanje i izdržljivost. Također uključuje ključ za navoj, ključ za navoj s T-ručicom, matricu, odvijač i mjerač nagiba vijaka. Uključuje 17 slavina i 17 matrica. NC, NF i NPT veličine.
Brand ‎Performance Tool
Country of Origin ‎China
Customer Reviews 4.1 4.1 out of 5 stars 196 ratings 4.1 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎W4001DB
Item Weight ‎2.95 pounds
Lift Type ‎Mechanical
Manufacturer ‎Performance Tool
Manufacturer Part Number ‎W4001DB
Model ‎W4001DB
OEM Part Number ‎W4001DB
Product Dimensions ‎2 x 14 x 7 inches

3.1

12 Review
5 Star
57
4 Star
17
3 Star
11
2 Star
5
1 Star
10

Napišite svoju recenziju

Vaš email neće biti objavljen. Sva obavezna polja označena su s*

Scritto da: Joanne smith
Good quality good price
Tools them selves were good quality and the price was good as well... shipped to me with a smashed case and no ability to keep it closed once out of the box... did its job ..
Scritto da: Marc Thompson
Worthless pieces of equipment for your workshop.
These units are complete rubbish. The 1/4"x20NC tap was unable to tap and complete a single through hole in flaking cast iron that was less than 1/4" thick; it was difficult to believe. Using WD40 as cutting fluid, I suspected the tap would function properly in this minimal aspect. After an 80% threading through the 1/4" travel, the tap was so dull it would not even engage the material for cutting a second hole. In a final desperate attempt, I tried to run each tap through a matching size tapped hole with minor imperfections to see how many would even drive. A single tap, 3/8", was able to clear the threads of an already tapped hole. No other tap was able to pass a hole requiring even minor clearing. Additionally, the T-wrenches/handles were completely worthless and neither actually fit any of the appropriately sized taps (without significant force for the T-wrench collet, and having a totally insecure grip while using the adjustable handle wrench). These wrenches earn the manufacturer a special reprimand. Once a tap was fitted as securely as possible, both wrenches failed to properly and securely hold the tap while rotating/driving, making tapping essentially impossible. Truly unreal. Lastly, the rough (friction) pattern (for gripping) on the rotating portion of the T-wrench did a serious number on my fingers, both while securing the tap in the collet retainer and while driving the wrench due to the dullness of the tapping bits. After an emergency run to the big orange store, a Dewalt replacement tap and T-handle wrench ran 20 holes consecutively without difficulty or incident in a fraction of the time with a 25-fold improved final result. Don't waste your time with this kit; it is completely worthless. In fact, I do not even trust the flimsy thread gauge that is included with the kit. Lesson learned; you get what you pay for.
Scritto da: 00xuser
A great set considering the bargain price
A great set considering the bargain price. It is an inexpensive set, but had all that was advertised, including the little gauge which was under the taps in the box provided. I like the chart provided, the handy box to keep it all together, and at this price it is a great starter set for those who wish to become acquainted with how to drill, tap and die. Tapped several holes successfully in 1018 steel and not broken any taps, although I did bend one of the handles down, almost breaking it, on the drill tap grip, so be careful how much pressure you apply. For a heavy duty set you will, undoubtedly, pay lots more.
Scritto da: A.Hilts
for that it worked just fine and was worth the price
All I got this for is to chase threads on my old truck just to clean things and get them back together, for that it worked just fine and was worth the price. The quality on it is kind of poor (expected) so cutting new threads might be difficult, or a one-time thing.
Scritto da: autberto salcedo
Does well
Nice to have a box that stores everything. Not all kits come complete with special handle it takes to use the tool. No more fiddling with an adjustable wrench
Scritto da: Louis
Great set of threading tools
This is a great set of threading taps and dies. Everything you need to make clean threads except the cutting oil.
Scritto da: jonsie
... few of these taps and they seem to work fine. The tapping handle is a bit cheap but ...
I have used a few of these taps and they seem to work fine. The tapping handle is a bit cheap but so was the purchace price. I would definitely buy this again.
Scritto da: Luis Felipe S. G.
Bueno para trabajos caseros
Queda claro que la calidad de esta herramienta va de acuerdo con el precio. Los machuelos presentan rebabas que es necesario limpiar para evitar daños en las cuerdas a crear. Algunos de los accesorios muestra una calidad de manufactura un tanto pobre, pero para el uso casero me parecen aceptables. Hay opciones de mejor calidad pero igualmente de mayor precio. Yo usaré principalmente estas herramientas con materiales suaves, por lo que no me preocupa la posible fragilidad de los mismos.
Scritto da: justin
You may as well burn $50
Absolutely terrible quality. It looks like the flutes were ground by hand, and most of the cutting faces are burred and the cutting angle is inconsistent. 100 percent do not reccomend
Scritto da: Alejandro Barajas
No muy buena calidad
Para su precio esta bien pero no es de uso rudo
Scritto da: Lmazinkaiser
Lo uso para trabajo ligero
Está excelente , lo recomiendo. Lo uso solo para trabajo ligero y me funciona de maravilla
Scritto da: José Luis
Muy malo
De Muy mala calidad,solo lo podrás usar una ves y se dañan los machuelos

Povezani proizvodi

hot
KLJUČ ZUPČANIKA 35 kom. Set Microdriver - 85035 35 kom. 1/4 Dr. MicroDriver set
3.6/5

€ 119.65

KLJUČ ZUPČANIKA 35 kom. Set Microdriver - 85035 35 kom. 1/4 Dr. MicroDriver set
3.6/5

€ 119.65

hot
CRAFTSMAN VERSASTACK Mehanički set alata, 71-dijelni, 1/4-in i 3/8-in pogon, SAE i metrički, čegrtaljke, utičnice, šesterokutni ključevi, adapter i još mnogo toga, polirano kromirano (CMMT45071) SET MEHANIČKIH ALATA
3.8/5

€ 119.11

CRAFTSMAN VERSASTACK Mehanički set alata, 71-dijelni, 1/4-in i 3/8-in pogon, SAE i metrički, čegrtaljke, utičnice, šesterokutni ključevi, adapter i još mnogo toga, polirano kromirano (CMMT45071) SET MEHANIČKIH ALATA
3.8/5

€ 119.11

hot
Lisle 70880 Utičnica za slavinu
3.7/5

€ 45.39

Lisle 70880 Utičnica za slavinu
3.7/5

€ 45.39

hot
Powerbuilt Set alata za utičnice i čegrtaljke od 54 dijela, produžne šipke, duboke i plitke utičnice, ladica za organizatore, serija Pro Tech - 949005 3/8 inča
3.5/5

€ 196.81

Powerbuilt Set alata za utičnice i čegrtaljke od 54 dijela, produžne šipke, duboke i plitke utičnice, ladica za organizatore, serija Pro Tech - 949005 3/8 inča
3.5/5

€ 196.81

hot
SATA 65-dijelni 1/4-inčni i 3/8-inčni pogonski mehaničarski set alata s čegrtaljkom, SAE i metričkim, s odvijačem, utičnicama, bitovima i dodacima - ST09011U set od 65 dijelova
3.8/5

€ 145.14

SATA 65-dijelni 1/4-inčni i 3/8-inčni pogonski mehaničarski set alata s čegrtaljkom, SAE i metričkim, s odvijačem, utičnicama, bitovima i dodacima - ST09011U set od 65 dijelova
3.8/5

€ 145.14

hot
CRAFTSMAN duboka utičnica, SAE, pogon od 3/8 inča, 9/16 inča, 6 točaka (CMMT43334)
3.9/5

€ 28.78

CRAFTSMAN duboka utičnica, SAE, pogon od 3/8 inča, 9/16 inča, 6 točaka (CMMT43334)
3.9/5

€ 28.78

hot
NEIKO 02448A 1/2 Drive Master Set udarnih nasadnih ključeva, 65 dijelova, standardne SAE (3/8-1-1/4) i metričke (10-24 mm) veličine, duboki i plitki komplet, uključuje adaptere i ručku s čegrtaljkom, 1/2 Impact nasadni set 1/2 pogona, glavni set, 65 dijelova SAE i metričkih 65 dijelova
3.9/5

€ 471.23

NEIKO 02448A 1/2 Drive Master Set udarnih nasadnih ključeva, 65 dijelova, standardne SAE (3/8-1-1/4) i metričke (10-24 mm) veličine, duboki i plitki komplet, uključuje adaptere i ručku s čegrtaljkom, 1/2 Impact nasadni set 1/2 pogona, glavni set, 65 dijelova SAE i metričkih 65 dijelova
3.9/5

€ 471.23

hot
NEIKO 02461A 3/4 inčni set udarnih nasadnih nasadnih nasadnih nasadnih nasadnih utičnica, SAE 1” do 1-1/2”, 8 komada, duboke/jumbo nasadne nasadne nasadne nasadne nasadne nasadne osovine, krom-vanadij Cr-V duboke SAE 9 komada
3.8/5

€ 152.20

NEIKO 02461A 3/4 inčni set udarnih nasadnih nasadnih nasadnih nasadnih nasadnih utičnica, SAE 1” do 1-1/2”, 8 komada, duboke/jumbo nasadne nasadne nasadne nasadne nasadne nasadne osovine, krom-vanadij Cr-V duboke SAE 9 komada
3.8/5

€ 152.20

Otkrijte našu međunarodnu mrežu

Šaljemo u 28 zemalja, preko 200.000 proizvoda. Budite u toku, pretplatite se na newsletter.

Array

Ukupno:€ 0.00

Vidi kolicaProvjeri

Kategorije

Sve kategorije
Jelovnik Kategorije Blizu Košarica

Menu